UNS-1 not / missaligned

[Floater]

Hi. 
After quilte some time not flying the C525 I wanted to take her for a few flights last weekend.
The problem: The UNS1 was always misaligned.
The assumed positions were is follows: 
Position EDDV assumed position EDDH
Position EGKB assumed position EGCN
Position EDDM assumed position LOWS
Position EDSB assumed position EDDF
because of this I was not able to enter a flightplan.

The avionics aligned as expected in all situations. 
it makes no difference which avionic setup I select ( default or GNS530).
 

[Floater]

I also just noticed that the date in the FMS is 1 Month ahead 

[amyinorbit]

On 11/4/2025 at 3:10 PM, Floater said:

Hi. 
After quilte some time not flying the C525 I wanted to take her for a few flights last weekend.
The problem: The UNS1 was always misaligned.
The assumed positions were is follows: 
Position EDDV assumed position EDDH
Position EGKB assumed position EGCN
Position EDDM assumed position LOWS
Position EDSB assumed position EDDF
because of this I was not able to enter a flightplan.

The avionics aligned as expected in all situations. 
it makes no difference which avionic setup I select ( default or GNS530).
 

Hello! Please post a log, this sounds suspiciously like the airport cache has gotten corrupted and isn’t returning all airports. If that’s the case: quit the sim, delete X-Plane/Output/caches/uns1, then start the sim again. That should solve it.

as for the date being one month ahead, that’s a known issue with this build. I’ve sent the TorqueSim guys a new build that fixes this and will be included whenever the next update comes out  

[Floater]

Deleting the cache seems not to have helped :-(

Log.txt

[amyinorbit]

What happens if you try to manually enter any of said airports in the flight plan?

[amyinorbit]

Looking at your log, it definitely looks like there is something weird going that corrupted or seriously messed up the airport cache. Could you try without any third party scenery?

you are also running fedora which isn’t - distribution I can test or support more than “best effort”. Was there a system update since the last time this worked correctly?

[Floater]

I have tested it on Linux mint, which  I dual boot atm. Same issue, so not a Fedora problem.
It also is present without any addon scenery, see log. 
If I try to enter another (my DEP Airport) I end up on the "define WPT page", see screenshot 

PS: Just for context: all other Aircraft default or Addon work, no GPS / FMS issue. 

Log_default_scenery.txt

Edited 9 hours ago by Floater

[amyinorbit]

that’s very strange, I can’t reproduce any of that on any of my machines. As a last resort, could you please try with  clean X-Plane install? The log still shows some scenery oddities even with stock scenery, which is surprising.

[Floater]

Ok, on a new install it works.
hmm... no Idea what`s messed up on my "normal" install 

Log.txt

[amyinorbit]

18 minutes ago, Floater said:

Ok, on a new install it works.
hmm... no Idea what`s messed up on my "normal" install 

Log.txt 383.64 kB · 0 downloads

That’s good news though, that means it’s not ghosts! I would suggest running the X-Plane installer again just to make sure your world airports aren’t corrupted somehow (which those log messages seem to indicate). Worth also nuking the whole X-Plane/Output/caches directory too for good measure.