x-beech Posted January 24, 2012 Report Posted January 24, 2012 The latest CRJ-200 download still won't install, it won't get past the email window. When I put in my email address it says 'You need to specify a value.' I've tried it as administrator, with security software turned off. Windows 7 x64.
Cameron Posted January 24, 2012 Author Report Posted January 24, 2012 The latest CRJ-200 download still won't install, it won't get past the email window. When I put in my email address it says 'You need to specify a value.' I've tried it as administrator, with security software turned off. Windows 7 x64.This is caused by having text size enlarged in Windows. You'll need to set your text size back to at max 100%. To do this:http://windows.microsoft.com/en-US/windows7/Make-the-text-on-your-screen-larger-or-smallerOnce you do this, re-run the installer. You will see that a password field is now also visible. The error you are getting is because you are entering a user email, but no password since the larger text is pushing it off the window.
NGC007 Posted January 24, 2012 Report Posted January 24, 2012 (edited) Windows installer won`t accept my email to complete the install. Keeps rejecting saying "You need to specify a Value." ?Even deleted the first download and re-downloaded to try again. Still says the same.I get the same problem and I too re-downloaded the update again, same problem.UPDATEReduced the text size on windows desktop and was able to notice that the installer required mu username as well!Works fine now! Edited January 24, 2012 by NGC007
x-beech Posted January 24, 2012 Report Posted January 24, 2012 Thank you Cameron for the quick solution, that was the problem. I never would have guessed, mainly because in hundreds of installs I've never run into that issue. You might want to put a note about it where people downloading the file will see it.
philipwyatt Posted January 24, 2012 Report Posted January 24, 2012 Hope this is the right place to post this but I am having an issue with the crj that I cannot fathom........the loc/nav for fms or nav 1 and nav 2 inputs will not capture at all and it seems like it will just not track the flight plan I inputted the purple guidance cross . I am also getting strange crashes to desktop while using the fms. Any assistance would be great and much appreciated as I did a flight last night from las to lax and had to fly the whole this using the heading bug
Cameron Posted January 24, 2012 Author Report Posted January 24, 2012 Hope this is the right place to post this but I am having an issue with the crj that I cannot fathom........the loc/nav for fms or nav 1 and nav 2 inputs will not capture at all and it seems like it will just not track the flight plan I inputted the purple guidance cross . I am also getting strange crashes to desktop while using the fms. Any assistance would be great and much appreciated as I did a flight last night from las to lax and had to fly the whole this using the heading bug Please post your crash_log.txt
anders1982 Posted January 24, 2012 Report Posted January 24, 2012 (edited) I get an immediate CTD when opening the CRJ-200.I did a clean install on X-plane 10.Please help, I can't wait to try this awesome update ;-)forgot to mention that the download/installation were both done 1-2 hours ago, so I assume that this has nothing to do with the "initial" crash issues.Log.txtproblemreport.rtf Edited January 24, 2012 by anders1982
anders1982 Posted January 24, 2012 Report Posted January 24, 2012 Hey Anders, have you checked this: ? That did the trick - thanks alot philipp
x-beech Posted January 25, 2012 Report Posted January 25, 2012 I checked the frame rates of the last version of the CRJ-200 before doing the new install. I was getting 21 fps parked on the runway at an airport with a lot of buildings. With the same view and parked at the same spot with this up-dated CRJ-200 I'm getting 30 fps. Quite an improvement.
philipp Posted January 25, 2012 Report Posted January 25, 2012 Yep. Dual-Core users should see an increase in framerate, quad-core users a slight decrease in CPU load. The reason is simple: More work done on the GPU. The CPU has 2, 4 or 8 cores I can use, with the GPU I have up to 400.Philipp
micknudsen Posted January 25, 2012 Report Posted January 25, 2012 Is anybody else having troubles installing the update on Mac OS X Lion? After typing in my email address and password, I get the following error:"Error fetching URL http://www.x-aviatio...ant/wrapper.php".If I deliberately type in a wrong password, I get a different error saying that email and password don't match, so it seems that I do have connection to the server.
TOBS Posted January 25, 2012 Report Posted January 25, 2012 (edited) Hi after installing the CRJ2 with the new download - the PFD and the EFIS stays dark and I cannot enable GPU Power on the FMC neither direct via mouse or with the IPAD CDU. I will do a new clean install - and please tell me - in the navigraph airac cycle I find SIDS and STARS in the VAS FMC download but not in the CRJ vers. 1.4.1- do I have to use them in the CRJ200? If yes do you did not put them into the plugin folder on purpose?Regards TomHi,Now after reinstall I threw out all plugins which is indeed not possible for operating this aircraft - the PFD is there but I still cannot set the position for aligning the PFD. (Still no SID and STARS in the nav folder!)The plugins are checklister, xpgf from sandy for go flightmoduels, python interface for the xjoymap with all the custom buttons I made, xarcars, chase view, airport navigator and VRInsight serialFP2 (which does not cause the problem).Please tell me what to do?!Did a new download, new install but no change or do I something wrong what I do not know. I still cannot press "SET POS" to align the PFD.Tom Edited January 25, 2012 by TOBS
philipp Posted January 25, 2012 Report Posted January 25, 2012 You can ignore the folders SID and STAR. Important is the folder LevelD_proc.Please try with a clean install first. If that works, proceed by installing new navdata.PFD and MFD not lighting up points to an issue with the copy protection, on which Cameron will assist.Philipp
TOBS Posted January 25, 2012 Report Posted January 25, 2012 (edited) You can ignore the folders SID and STAR. Important is the folder LevelD_proc.Please try with a clean install first. If that works, proceed by installing new navdata.PFD and MFD not lighting up points to an issue with the copy protection, on which Cameron will assist.PhilippIt is far more complicate loading without any plugin after a clean install let see me PFD and EFIS! But I could never enter the POS to align the PFD artificial horizon.TomEdit:after removing all plugins I do not see PFD and EFISTom Edited January 25, 2012 by TOBS
philipp Posted January 25, 2012 Report Posted January 25, 2012 I still have no clear picture of your problem.Please post your Log.txt and a screenshot.Philipp
Cameron Posted January 25, 2012 Author Report Posted January 25, 2012 after removing all plugins I do not see PFD and EFISTomPhilipp was not asking you to remove plug-ins, Tom. He was asking you to leave the SID/STAR data alone....clean.
TOBS Posted January 25, 2012 Report Posted January 25, 2012 (edited) I still have no clear picture of your problem.Please post your Log.txt and a screenshot.PhilippIn the moment itis clear - no PFD no EFIS no other plugins then the default and gizmo / ShrinkwarpSomtimes after loading I see PFD and EFIS but then I cannot press the POS button to align the artificila horizon on the pfd.Just now I had the phenomen that I saw PFD and EFIS for a short while and then - darkI attached screenshots and log fileRegards TomLog.txt Edited January 25, 2012 by TOBS
TOBS Posted January 25, 2012 Report Posted January 25, 2012 Philipp was not asking you to remove plug-ins, Tom. He was asking you to leave the SID/STAR data alone....clean.I did not touched that nab folder it is a clean and untouched installation!Regards Tom
philipp Posted January 25, 2012 Report Posted January 25, 2012 (edited) Somtimes after loading I see PFD and EFIS but then I cannot press the POS button to align the artificila horizon on the pfd. I hate to say this, but this sounds like a user error - did you put the IRS 1 and 2 into align mode before entering the coordinates?Just now I had the phenomen that I saw PFD and EFIS for a short while and then - darkThis sounds exactly like the copy protection kicking in. Cameron, your turn Edited January 25, 2012 by philipp
TOBS Posted January 25, 2012 Report Posted January 25, 2012 Philipp, maybe I am blind but do I find somewhere a manual about the new FMC?Regards Tom
schrader501 Posted January 25, 2012 Report Posted January 25, 2012 Wow, everything looks very fine, but I had to choose X-Plane10 and then switch back to X-Plane9, otherwise X-Plane 9 didn't accept the plane.But: Very often when I use the CDU (built in), pressing the knobs beside the screen to put a waypoint or something like that in the Flight-Plan, X-Plane crashes completely.System: Core I7, NVidia GTX 550, 8GB RAM, SSD, Ubuntu Natty
retiree_caf Posted January 26, 2012 Report Posted January 26, 2012 Hope the folks can find the issue on 1.4.1 crashes using SIDs and STARs. I tried everything from re-installing everything and still have the crashes ((
philipp Posted January 26, 2012 Report Posted January 26, 2012 (edited) @schrader501 , @retiree_caf:I need _specific_ descriptions of what you are trying to do, and what you are pressing at the moment it crashes."When I press some knobs", or "When using SID and STARs" are not descriptive of what your problem is.A problem description should include-the operating system you are using-the navdata cycle used-the departure and destination airport-the planned routing between those-the SID, Transition, STAR, Transition and Approach at each airport-the sequence of your entering (do you first enter the route, then the SID, or first the SID, then the route, etc.)-after the crash, the crash report (crash_log.txt on Windows, crash report from Console.app on Mac)Philipp Edited January 26, 2012 by philipp
TOBS Posted January 26, 2012 Report Posted January 26, 2012 After choosing another Stand on the airport I can not anymore activate GPU. Brakes are on / Batterie ON - What can I do?Tom
Recommended Posts