Thrust Reverser Issue - Challenger 650

[pilotman34765]

For some reason, whenever I put my throttles in the TR detent, the N1 doesn't seem to spool up, and it doesn't sound like the Reversers are roaring. This did not happen in the past, and I'm not sure what happened to cause this. Any help is appreciated!

[Pils]

9 hours ago, pilotman34765 said:

whenever I put my throttles in the TR detent

How exactly do you have this configured in the sim? Also please post your Log.txt.

[pilotman34765]

Here is how I setup 

Quote

How exactly do you have this configured in the sim? Also please post your Log.txt.

So I use the Honeycomb Bravo throttles, and use them in the GA configuration. Buttons 23 and 24 are my TR detents, and these work with all other aircraft and used to with the Challenger, but for some reason, it just stopped working. 

Log.txt

[Pils]

Can you post a Log.txt from when you load the Challenger, please?

[Pils]

14 hours ago, pilotman34765 said:

So I use the Honeycomb Bravo throttles, and use them in the GA configuration. Buttons 23 and 24 are my TR detents, and these work with all other aircraft and used to with the Challenger, but for some reason, it just stopped working. 

 

You should have a Control Profile specifically for the Challenger, trying to use the same for every aircraft is probably going to cause headaches. In particular do not use any of the default auto-throttle commands (including "TOGA power") for the Challenger, it will cause problems with throttle usage. There are CL650 specific commands that are more suitable.

[jetpeter1]

There is no roar that never existed for some reason they don’t add a reverse thrust sound & XPRealistic isn’t compatible with any hot start stuff so we have no TR sound 

[simking1]

I had to make a new profile (x57pro) and assign reverse thrust hold max..or reverse thrust toggle.. one you click and then throttle mode goes reverse and throttle is in reverse mode,the other is you just hold the button and it starts reverseing but you have to hold the button releasing it goes to normal, haven't looked to see if they have separate commands in the cl650 section.