PFD 1 remains blank

[Art]

After not flying it for quite a while I have started up my TBM again. Unfortunately the pilot side PFD remains blank (using the normal startup procedure. I also tried to use any switch I could think of).

I made sure no failures are set. I've re-downloaded and re-installed the TBM. I am running X-Plane 11 updated to the latest version (no betas and not using the experimental flight model). I have created a new airframe. The problem remains.

If I start up the engine anyway, the TRQ indication on the MFD and PFD 2 remains crossed out.

The avionics seem to work normally in other airplanes and I have not encountered this problem before.

What can it be?

TBM900_Log.txt Log.txt

Edited August 12, 2022 by Art

[Pils]

You’re 100% sure about the failures? In X-Plane’s failure manager? Smashed the “fix all” button and disabled MTBF random failures?

[Art]

Thanks, but yes. I have used "Fix all systems" and made sure the checkbox for the random failures is disabled.

Edited August 12, 2022 by Art

[Pils]

Circuit breakers?

[Art]

They are all in. Specifically also the one marked PFD 1.

Edited August 12, 2022 by Art

[Pils]

I would cycle that one just in case, but I’m out of ideas.

[Art]

I already have, no change. Thanks!

[Art]

I've pushed the PFD 1 circuit breaker in and out several times again, no change. Then, related or not, Windows crashed. After rebooting I started X-Plane again and when I loaded the TBM, the PFD actually came on! It is working now, no idea why - maybe cycling the breaker did it (or the Windows crash fixed it ;-) I hope it stays that way.

Edited August 12, 2022 by Art