jenijek Posted July 17, 2022 Report Posted July 17, 2022 (edited) Hi guys! I tried to start it from a cold state today, for some reason the GNS screens did not turn on. Moved 2 toggle switches to the ON position. Only the transponder turned on. Check, please. Edited July 17, 2022 by jenijek 1
NotJayKay Posted July 17, 2022 Report Posted July 17, 2022 Just want to say I'm running into the same issue, 4 Blade, GNS. Went through the checklist, didn't see any breakers popped. 1
jenijek Posted July 17, 2022 Author Report Posted July 17, 2022 One to one the same situation! 20 times I watched the beginning of the video of the stream, I thought that I myself was doing it wrong, it turned out that I was not the only one with such a problem
daemotron Posted July 17, 2022 Report Posted July 17, 2022 Do you by chance have a hardware switch bound to the default avionics on/off command? I ran into this on my first attempt... 2
jenijek Posted July 17, 2022 Author Report Posted July 17, 2022 (edited) 15 minutes ago, daemotron said: Do you by chance have a hardware switch bound to the default avionics on/off command? I ran into this on my first attempt... Somehow recently there was something similar flying on a Boeing 747 free model there, in order to turn on the avionics, it was necessary to bind a key combination to turn on the avionics! A key combination was assigned in the control settings. Do you mean it!? Thank you I will definitely check Thank you very much for the quick response Edited July 17, 2022 by jenijek
NotJayKay Posted July 17, 2022 Report Posted July 17, 2022 51 minutes ago, daemotron said: Do you by chance have a hardware switch bound to the default avionics on/off command? I ran into this on my first attempt... Ahhh, this was my issue. Honeycomb Alpha. Rebound the Avionics On and Avionics Off to "Do Nothing" and this seemed to have solved my issue. 1 1
jenijek Posted July 18, 2022 Author Report Posted July 18, 2022 Greetings! Checked today I can't start, turn on GNS! In the assigned keyboard combinations, the combination of buttons for turning on avionics is not used. GNS devices are not turned on from the toggle switches, but as soon as I assign a key combination, let's say LShift + A to the command to turn on the avionics and activate it, then the avionics turn on and off from the toggle switches. Please help what am I doing wrong
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now