start the engine sr 20

[JClay]

How do i start this engine i followed the instructions and the engine still wont start

[Coop]

Most likely the engine is either:

• Being flooded - make sure to use 3 seconds of boost maximum
• Not primed - make sure to run the boost pump for ~2 seconds.
• Not enough/too much throttle - make sure the throttle is set to 1/4" in-sim when starting, as that is around where the proper ratios are reached for starting. Feel free to slowly oscillate the throttle up and down slightly to see if it would catch. The 1/4" mark could be at a different spot on your hardware throttle if it doesn't have the same throw as the real throttle.