David B Posted January 28, 2021 Report Posted January 28, 2021 not sure what is wrong with my setup. The G5 HSI functions and displays correvtly except that the CDI does not follow the GPS track or DTK. If I change to VOR, it does work properly. What am I missing?
Coop Posted January 28, 2021 Report Posted January 28, 2021 Is this using the LR GNS 430 or the RealityXP GNS 430? If it is just not automatically adjusting the course to match the GPS DTK, this is a customization needed to be made using the "Plane Maker" application. Open the aircraft of concern in the app, then under Systems -> General 1, select the two circled options below.
David B Posted January 28, 2021 Author Report Posted January 28, 2021 HI, I am using Reality XP. The settings were as recommended above, except the autopilot was different so I changed it to the STEC-55. Still not working for GPS.
Coop Posted January 29, 2021 Report Posted January 29, 2021 Hi David, With RealityXP, you will need to adjust their settings based on how your specific is configured. There is probably an option in RealityXP settings to have the GNS drive the HSI, or drive the autopilot. Trying either of those could get it working. RealityXP will know more in this regard. I would also recommend changing the autopilot back to how it was prior, as most likely the aircraft developer had it set at a certain mode on purpose.
David B Posted January 29, 2021 Author Report Posted January 29, 2021 Thanks Coop, I will investigate the Reality XP side.
Le Sioux Posted April 12, 2024 Report Posted April 12, 2024 Hi David B, did you get an answer from Reality X, about your problem ? Many thanks Le Sioux
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now