question regarding autolanding with ixeg

[doebro2010]

I flew many tutorials i.e Q8 pilot with ixeg.

but one thing I cannot get it done. So something I do wrong or missed a handling.

after FMC filled in and look finally to prog page I see the ils number and is also in the plan the same so no difference with skyvector or otherones.

but as soon as I use the approach button the plane still follows it path and I see the the GS is coming up but a few miles further

the plane makes a move to the left and doesnot follow the path.

I have the right altitude for interception.

looking forward to have a tip from your side what I do wrong.

Doeke

 

[mmerelles]

can you record/upload a video and share the youtube link? At least several screen captures before the aircraft is approaching the G/S glideslope and after to see what modes are engaged and what the system is telling?

 

In order for the ILS to operate, check:

-The ILS freq. is tuned

-The CRC (course) is set to corresponding heading

-Make sure you are not intercepting wrong ILS side in those airports sharing frequencies. What airport/runway you are trying?

-is the LOCalizer being captured but not the G/S? or both?

-A/P should be engaged and not in CWSP mode to capture.

 

It will be really useful having a video or a few screen captures so see what is going on, because there are a number of things o check.

 

[doebro2010]

The CRC (course) is set to corresponding heading

 

This was the culprit. I wasnot aware that this courses on both side was important for the autolanding.

thanks I did it again and now it works

doeke

[kathyclark]

On 4/19/2020 at 3:41 AM, mmerelles said:

can you record/upload a video and share the youtube link? At least several screen captures before the aircraft is approaching the G/S glideslope and after to see what modes are engaged and what the system is telling?

 

In order for the ILS to operate, check:

-The ILS freq. is tuned

-The CRC (course) is set to corresponding heading

-Make sure you are not intercepting wrong ILS side in those airports sharing frequencies. What airport/runway you are trying?

-is the LOCalizer being captured but not the G/S? or both?

-A/P should be engaged and not in CWSP mode to capture.

 

It will be really useful having a video or a few screen captures so see what is going on, because there are a number of things o check.

 

Thank you so much! That's working!