xplanepilot_lj Posted April 5, 2020 Report Posted April 5, 2020 I just updated v1.1.12 and I am experiencing the AP Control Panel (above PFD/MFD) will not let me make changes to dials or button except for CSR2. I see vertical cursors (one up and one down). I was unable to get a screenshot of the cursors Even disengaging the AP, the panel still will not let me make changes to dials or buttons.
Goran_M Posted April 6, 2020 Report Posted April 6, 2020 Can you post your log.txt file? Are you using 11.41 or 11.50?
Goran_M Posted April 6, 2020 Report Posted April 6, 2020 It looks like something is overwriting your AP commands. Can you double check all your assignments, and perhaps try removing flywithlua for the time being, then test again. Make sure all failures in the default X-Plane failures section are set to "always working". Check your maintenance manager, and make sure everything is green there.
xplanepilot_lj Posted April 9, 2020 Author Report Posted April 9, 2020 On 4/5/2020 at 9:43 PM, Goran_M said: It looks like something is overwriting your AP commands. Can you double check all your assignments, and perhaps try removing flywithlua for the time being, then test again. Make sure all failures in the default X-Plane failures section are set to "always working". Check your maintenance manager, and make sure everything is green there. I dont know what happened but it appears to have resolved itself. Thank you for giving me some direction.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now