patkaser Posted February 23, 2020 Report Posted February 23, 2020 The popout window has a titlebar thats blocking the compass/heading indicator. Cant use the other one the hardware from RealSimGeam because the bezel hangs out onto the pther screens Quote
Coop Posted February 25, 2020 Report Posted February 25, 2020 That is due to how Windows automatically resizes windows when you drag the window. To have the window be automatically placed in there, you will need to set the coordinates of that location in the config file of the G5. Full details are available here: https://torquesim.atlassian.net/wiki/spaces/G/pages/197208/G5+acfConfig.cfg+Description (please note, this page has been updated for 1.1 which is coming in the next few days, if you don't see some of the things shown on this page yet in your config file, don't fret) The key values you will want to set are: g5_nbzl_open_at_launch_a = 1 (and _b for the HSI) This will automatically open and pop-out the window at launch. Set this to 1 g5_nbzl_x_a = **** (and _b for the HSI) Set this value to the global screen coordinate of the left side of the G5 monitor, as configured with Windows. g5_nbzl_y_a = **** (and _b for the HSI) Set this value to the global screen coordinate of the bottom side of the G5 monitor, as configured with Windows. With these all set, the window should automatically popup and position itself when the plugin is loaded. It will take a bit of fiddling around to get the right coordinates, but once it is set, it should work great! 1 Quote
RealSimGear Posted February 25, 2020 Report Posted February 25, 2020 Hi @Patkaser Have you tried contacting us on our support address? The white bar can be easily hidden. support@realsimgear.com 1 Quote
patkaser Posted February 27, 2020 Author Report Posted February 27, 2020 (edited) On 2/25/2020 at 5:15 PM, Coop said: That is due to how Windows automatically resizes windows when you drag the window. To have the window be automatically placed in there, you will need to set the coordinates of that location in the config file of the G5. Full details are available here: https://torquesim.atlassian.net/wiki/spaces/G/pages/197208/G5+acfConfig.cfg+Description (please note, this page has been updated for 1.1 which is coming in the next few days, if you don't see some of the things shown on this page yet in your config file, don't fret) The key values you will want to set are: g5_nbzl_open_at_launch_a = 1 (and _b for the HSI) This will automatically open and pop-out the window at launch. Set this to 1 g5_nbzl_x_a = **** (and _b for the HSI) Set this value to the global screen coordinate of the left side of the G5 monitor, as configured with Windows. g5_nbzl_y_a = **** (and _b for the HSI) Set this value to the global screen coordinate of the bottom side of the G5 monitor, as configured with Windows. With these all set, the window should automatically popup and position itself when the plugin is loaded. It will take a bit of fiddling around to get the right coordinates, but once it is set, it should work great! Thanks i will try that. I will say that im surprised with how complicated this is to setup for even a power user. Edited February 27, 2020 by patkaser 1 Quote
patkaser Posted February 27, 2020 Author Report Posted February 27, 2020 (edited) On 2/25/2020 at 5:16 PM, RealSimGear said: Hi @Patkaser Have you tried contacting us on our support address? The white bar can be easily hidden. support@realsimgear.com The issue i had was with the software, not the hardware. I went to your website and there were no instruction on setting it up at all. I had to chat with support, which did send me some instructions that i followed. Edited February 27, 2020 by patkaser Quote
patkaser Posted March 2, 2020 Author Report Posted March 2, 2020 On 2/25/2020 at 5:15 PM, Coop said: That is due to how Windows automatically resizes windows when you drag the window. To have the window be automatically placed in there, you will need to set the coordinates of that location in the config file of the G5. Full details are available here: https://torquesim.atlassian.net/wiki/spaces/G/pages/197208/G5+acfConfig.cfg+Description (please note, this page has been updated for 1.1 which is coming in the next few days, if you don't see some of the things shown on this page yet in your config file, don't fret) The key values you will want to set are: g5_nbzl_open_at_launch_a = 1 (and _b for the HSI) This will automatically open and pop-out the window at launch. Set this to 1 g5_nbzl_x_a = **** (and _b for the HSI) Set this value to the global screen coordinate of the left side of the G5 monitor, as configured with Windows. g5_nbzl_y_a = **** (and _b for the HSI) Set this value to the global screen coordinate of the bottom side of the G5 monitor, as configured with Windows. With these all set, the window should automatically popup and position itself when the plugin is loaded. It will take a bit of fiddling around to get the right coordinates, but once it is set, it should work great! How would i find the x and y coordinates to place the window? Quote
Coop Posted March 2, 2020 Report Posted March 2, 2020 10 hours ago, patkaser said: How would i find the x and y coordinates to place the window? X and Y coordinates are based on how your monitors are set up in your operating system preferences. The x value of 0 would be the left most edge of your left most monitor (or primary monitor, in some circumstances). The y value of 0 would be the bottom most edge of your bottom most monitor (or primary monitor, in some circumstances). The best method to place the panels is to try different values in the config file, save the file, then in X-Plane, you can go to the developer menu and "Reload Aircraft (without art)" and the plugin will reload, without you needing to reload the whole simulator. Quote
patkaser Posted March 2, 2020 Author Report Posted March 2, 2020 (edited) Thanks. That seems doable. I appreciate the help! Edited March 2, 2020 by patkaser 1 Quote
patkaser Posted March 4, 2020 Author Report Posted March 4, 2020 So how do i set the stacking order? the bottom ones title bar is over the one above it and I can only fix it if I click on them and set it manually Quote
Coop Posted March 4, 2020 Report Posted March 4, 2020 15 hours ago, patkaser said: So how do i set the stacking order? the bottom ones title bar is over the one above it and I can only fix it if I click on them and set it manually Oh, interesting. Haven't though of load ordering mattering, but I guess on a single monitor it really would. I will file a bug on this so G5_B loads before G5_A at initialization. Quote
Coop Posted March 8, 2020 Report Posted March 8, 2020 2 hours ago, patkaser said: Thanks. Any ETA on this fix? No ETA yet. It is slated for 1.1.1 though, so it will be at least a week or two after 1.1.0 drops. Quote
Coop Posted March 8, 2020 Report Posted March 8, 2020 2 hours ago, patkaser said: Thanks. Any ETA on this fix? Once we have it functional in-sim, I will PM you a beta of 1.1.1 to test. Quote
Coop Posted May 16, 2020 Report Posted May 16, 2020 1 hour ago, patkaser said: Any progress on this issue? I will send you a beta to try! Quote
patkaser Posted May 19, 2020 Author Report Posted May 19, 2020 What do I need to do to set the load order? It still is loading a then b which is giving me the title bar issue. Quote
Coop Posted May 19, 2020 Report Posted May 19, 2020 I will look into this more once I get working on the big slew of changes on the todo list for the G5 Quote
patkaser Posted July 20, 2021 Author Report Posted July 20, 2021 Any word on this? We havent heard anything in a year... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.