G1000 Approach/Arrival issue with Airport Waypoint?

[DJSean00]

Hi All,

Got a bit of an odd one for you all.

I keep getting the Airport ICAO stuck in between my arrivals and approach.

The scenario is, I'll have a flight (like the one in the picture below) from LOWI to LICA. This has been exported from PFPX and the last waypoint before I put any arrival in is LICA.  I'll go to put a arrival in and keep getting the Airport ICAO in the middle of the arrival like below. If I delete it I'm left with a route discontinuity.

Anyone have this issue with the latest version of the TBM?

Another example below:

 

Edited December 10, 2018 by DJSean00

[DJSean00]

Another flight into EDDF

I've setup for the GITEX 4P taking me from GITEX to DLE for the ILS Y DLE transition for 27L

[RobW05]

That is because you have loaded the approach, but not activated. After you are cleared for the approach, go to the procedures menu again and select activate approach. 

Now the approach phase is active in your flight plan. 

[DJSean00]

Just now, RobW05 said:

That is because you have loaded the approach, but not activated. After you are cleared for the approach, go to the procedures menu again and select activate approach. 

Now the approach phase is active in your flight plan. 

Thanks very much @RobW05

So Ops Normal until I activate the approach when clrd?

[RobW05]

You're welcome! 

Yes, that's how it's meant to be.