KrazyS0b Posted November 7, 2018 Report Posted November 7, 2018 Since 1.09 my FMS has been completely unusable. I click on it and nothing happens. I basically cannot use my center display at all. I click the buttons on the display for the checklist and it works but nothing else will change, like I cannot change the range or type anything. I dont know if it is a seperate issue or the same issue but my CDI will not go into GPS mode (Magenta CDI). It will cycle from vor1 and vor2 (Green CDI). I tried entering an approach from the left MFD and activated it just fine, but the CDI and the NAV in Autopilot will not activate the GPS. Thank you for any advice.
Goran_M Posted November 7, 2018 Report Posted November 7, 2018 Did you check the maintenance manager to see if it's damaged?
KrazyS0b Posted November 7, 2018 Author Report Posted November 7, 2018 Oh i did forget to add that.. nothing damaged in Maintenance manager. All ".....as new".
KrazyS0b Posted November 7, 2018 Author Report Posted November 7, 2018 another thing i forgot to add. I was able to get the GPS CDI to show up but i had to use the RealityXP GTN650 and activate an approach on that. When I tried the Left MFD to activate the approach it would never change to the GPS CDI.
Goran_M Posted November 7, 2018 Report Posted November 7, 2018 Please, please please don't add other 3rd party plugins that can interfere with the navigation of the TBM and the G1000. We're using the default G1000 base model, but there is a lot of code running inside it, that is also linked to the autopilot. We haven't tested this in any way with the GTN650, and using the GTN can have unpredictable results, along with voiding all support. We can't help people if another developers product is trying to work with ours, and we haven't tested it. If you want us to diagnose it further, you will need to completely remove all traces of the GTN from the TBM, try the FMC again, and then, if it still doesn't work, send us a log.txt file. Keep in mind, the TBM is still not supported in 11.3. Only 11.26.
KrazyS0b Posted November 7, 2018 Author Report Posted November 7, 2018 I normally dont use the GTN650 for the TBM but because it wasnt working i tried it. I will disable again. I am using 11.26.
KrazyS0b Posted November 7, 2018 Author Report Posted November 7, 2018 I removed RXP and tried again. The FMS still inop. I attached the Log.txt from the xplane main directory. Log.txt
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now