IXEG B737 Pressurization problem

[jaegerchen]

Hi,

I updated the IXEG 737 to v1.2 and now I got the Problem, that the X-Plane11 simulates a hypoxia above FL200 even when the cabin altitude doesn`t climb above 3000 or 4000ft.

I`ve even done a test flight to find wheather the pressuarization panel isn´t set correct but I couldn`t find anything.

I took this screenshot during the testflight at FL210 this is how the panel was set when the x-plane was simulating the hypoxia.

Maybe I just forgot to set something or it is set completly wrong but this is the way on wich the IXEG 737 was even set when I used it in X-plane10.

Thanks for your help.

[mmerelles]

are the packs set to auto? maybe you forgot them to OFF during engine startup? unfortunately your screen capture is very restrictive and i can not see the packs.

please make a full overhead panel capture next time, also forward panel screen capture to see everything and give you better support

[jaegerchen]

[mmerelles]

i see everything correct on this picture and the cabin is pressurizing.  Maybe smoke?

 

Some ideas:

is there any alarm or warning on the front panel?

have you verified is not an xplane random failure just in case? ty clicking "fix all systems" while the problem is going on? (menu is under flight -> edit failures)

maybe a plugin conflict? can you attach your xplane log.txt file found on your xplane root folder

[jaegerchen]

Hi,

no there isn`t an warning or something else and I`ve set it al like I`ve done it when I used the X-Plane 10.

The only Thing, that I found is that I don`t had this Problem when I start the flight with the ready to fly mode on the last flight (3 hours ago) I climbed to FL300 and above without any Problems but when I start with the cold and dark mode and Startup the plane myself, I get the Problem again without any warnings.

Log.txt

[mmerelles]

Honestly i am running out of ideas.

 

I have noticed on your log you are running first xp11 release 11.0, they released 11.01 later and now current version is 11.02rc2. During the process Laminar fixed a bunch of issues and they were also messing with jetengine modeling and parameters.

 

I wonder if your issue could be related to xplane not to the aircraft. Didn't you update xplane to latest version for any special reason? I would recommend doing so. Even if this does not cure the problem a lot of stuff was fixed improved already.

[jaegerchen]

Yes I can`t update the x-plane because the installer can`t connect to the Server.

The Support told me that there is a Firewall wich is blocking the Connection but I can`t find it.

[donoscar]

try to find Windows Defender and add an exception rule to it, including the complete XP11 root folder

google it up if you are not able to set up rules yourself, there are a lot of tutorials out there