[1.0.7] pitch trim connstantly moving down after TO/GA

[naigovan]

Hello!

I'm having even a set of problems down here

I'm using flooliwng route

USSS(08L) LUNA1A LUNAG A713 NOGRI R834 OK R487 RP R480 CW R489 MF BITS1R UUWW

first of all I'm seing zeores in FMC in all SID legs in altitudes so I have to correct them manually or VNAV won't engage

this happens to almost all SIDs btw

 

After engaging TO/GA aicraft starts infitintly to move trim pitch down so I barely can takeoff at all and continues to do so during flight

after teakoff, plane refuses to follow flight directors at all no mater VNAV or HGD SEL

more than that if I try to go directly to some point or change anything in FMC during flight FPS drops to 1-2 until I pause sim, than fps goes back no normal so I unpause ang continue to fly with normal FPS

rebooting GIZMO in flight stops in infinite pitch trim going down, plane starts to follow flight directors(obviosly with no route so in HDG SEL mode)

I'm using AIRAC 1610 cycle from Navigraph

WIndows 10

I also have only one MIcrosoft Visual C++ 2015 library installed (x32 and x64) maybe this is a core reason

Can you give me some advice on how to make this plane fly?

 

[mmerelles]

When you have no speed / altitudes on the fmc legs page, this typically means you have not programmed the PERFormance data onto the FMC, you need to set aircraft weight, cruise altitude, cost index, etc.

If you do not enter all that information vnav has no way to calculate/populate speed/altitudes for the flight plan.

note: check all fmc legs pages you have no route discontinuities and be sure you activated and executed the route

 

when you modify something on your flight plan, the fmc has to recalculate it real time until you EXECute the changes on the fmc. During this period fps typically drops to 1-2 if you have windows defender enabled and you did not set an exception for the entire x-plane folder. Windows defender consumes the machine resources and xplane dies.

 

 

If you still have issues please attach your xplane log.txt file found on your xplane root folder to see if anything comes up. Also some screen captures of your aircraft and fmc configuration will help to understand what is going on.

Edited October 6, 2016 by mmerelles

[naigovan]

3 hours ago, mmerelles said:

When you have no speed / altitudes on the fmc legs page

Again I have no speed/altitudes for SID legs. outside SID all good, Yes I konow how to set PERF data

I encountered weird behavior on that SID:  USSS(08L) LUNA1A with other aircraft so maybe this is AIRAC bug

[poodster]

3 hours ago, naigovan said:

Again I have no speed/altitudes for SID legs. outside SID all good, Yes I konow how to set PERF data

I encountered weird behavior on that SID:  USSS(08L) LUNA1A with other aircraft so maybe this is AIRAC bug

It's probably a database bug like you said. Try other airports like cyyz, klax, etc. Those I know have valid Sid and stars 

[Morten]

On 5.10.2016 at 10:55 PM, naigovan said:

After engaging TO/GA aicraft starts infitintly to move trim pitch down so I barely can takeoff at all and continues to do so during flight

Sounds like you have engaged the AP on the ground?