General Aviation
192 files
-
Carenado F33 Bonanza Livery
By Zach Decou
Hello Guys and Gals
Here is a fictional livery for the Carenado F33A Bonanza.
It has a vintage-ish vibe of burnt orange and dark grey.
Tail number is included on the panel and fuselage. I can upload the .psd files on request if someone wants to change the tail number.
Hope you like it!
45 downloads
0 comments
Submitted
-
Polish Border Guard livery for PZL M20 "Mewa" (Seneca)
Polish Border Guard livery for PZL M20 "Mewa" ( Piper Seneca manufactured in Poland by WSK PZL Mielec in a limited series from the 1980s. )
A repaint for the Seneca II model by Carenado. ( XP9 and XP10 )
This is a repaint representing a "Mewa" in a Polish Border Guard livery , as far as possible within the restrictions of the texturemapping wich comes with this Carenado plane , wich isn`t that painter friendly.
Nevertheless a gorgeous plane to fly and paint.
Unzip PZL M20 Mewa.zip into a temp. folder and read PZL M20 Mewa readme.pdf
Enjoy
Leen de Jager
http://www.flybike-paints.nl
25 downloads
0 comments
Updated
-
F-GNEE - Default X-Plane 10 King C90
By audiotracker
A new livery for the default C90 in the general aviation folder
22 downloads
0 comments
Updated
-
Cessna 172N Skyhawk II
This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this
specific aircraft. Since these are only textures, no further support is necessary or given.
Installation
Open the zip file and move the whole folder N1971F to X-Plane 10 (where you installed X-Plane)--->Aircraft---
>Carenado Cessna 172 v2 (where you installed the Carenado package)--->liveries. That's it!
ile information
The textures herein are made from the Carenado blanks. I have made every attempt to faithfully reproduce N1971F to
the best of my abilities. Limitations in the blank paint kit make it impossible to mirror correctly the right
fuselage, as only the left fuse is included. This means certain ommisions were necessary, such as the Skyhawk logo on
the fuselage. I have placed it on the lower tail section instead.
39 downloads
0 comments
Updated
-
Cessna 172N Skyhawk II Greek Airforce
This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below. If for some reason you don't like these textures, just delete the folder 69-7200.
Installation
Open the zip file and move the whole folder 69-7200 to X-Plane 10 (where you installed X-Plane)--->Aircraft-->Carenado Cessna 172 v2 (where you installed the Carenado package)--->liveries. That's it!
File information
The textures herein are made from the Carenado blanks. I have made every attempt to faithfully reproduce 69-7200 to the best of my abilities. Limitations in the blank paint kit make it impossible to mirror correctly the right fuselage, as only the left fuse is included. This means certain omissions or inaccuracies were necessary, such as the Greek lettering on the right door is reversed.
24 downloads
- Carenado
- Cessna 172N
- (and 1 more)
0 comments
Updated
-
Cessna 172N Skyhawk II D-ECIK
This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below.
File information
The textures herein are made from the Carenado blanks. I have made every attempt to faithfully reproduce D-ECIK to the best of my abilities. Limitations in the blank paint kit make it impossible to mirror correctly the right fuselage, as only the left fuse is included. This particular aircraft didn't have any problems other than the size of registration and underwing lettering that cannot be placed there.
34 downloads
0 comments
Updated
-
Cessna 172N Skyhawk II G-BEUX
This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below. If for some reason you don't like these textures, just delete the folder G-BEUX.
Installation
*** IMPORTANT***
I have included a .obj file that Dan Klaue provided to fix a small problem causing wing registrations to display incorrectly. The filename is TransparentStickers.obj. You must copy this file to the aircraft's main objects folder of the Carenado C172II v2 main folder. You will be asked if you want to replace the existing file, say yes. Make a backup of the original first.
then...
Open the zip file and move the whole folder G-BEUX to X-Plane 10 (where you installed X-Plane)--->Aircraft-->Carenado Cessna 172 v2 (where you installed the Carenado package)--->liveries. That's it!
File information
The textures herein are made from the Carenado blanks. I have made every attempt to faithfully reproduce G-BEUX to the best of my abilities. Limitations in the blank paint kit make it impossible to mirror correctly some of the details on the right fuselage, as only the left fuse is included.
40 downloads
0 comments
Updated
-
Cessna 172N Skyhawk II I-CCAP Bergamo Aero Club
This archive only contains textures for the Carenado 172II V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below.
Installation
*** I have included a .obj file that Dan Klaue provided to fix a small problem causing wing registrations to display incorrectly. The filename is TransparentStickers.obj. You must copy this file to the aircraft's main objects folder of the Carenado C172II v2 main folder. You will be asked if you want to replace the existing file, say yes. Make a backup of the original first. This file will enable the under-wing registration of the aircraft.
then...
Open the zip file and move the whole folder I-CCAP to X-Plane 10 (where you installed X-Plane)--->Aircraft-->Carenado Cessna 172 v2 (where you installed the Carenado package)--->liveries. That's it!
38 downloads
0 comments
Updated
-
Ejercito del Aire Grupo 42 nr 5
Ejercito del Aire Grupo 42 nr 5 ( Spanish Air-force Training-school ) ,
livery made by Leen "Flybike" de Jager
You need to have the Carenado Beechcraft F33a Bonanza installed to use this textures-set.
These textures are compatible wil all versions XP9 >>>>
Istallation:
Just unzip " Ejercito del Aire Grupo 42 nr 5.zip " into the liveries folder.
Enjoy.
Leen de Jager
http://www.flybike-paints.nl
23 downloads
0 comments
Updated
-
"Centurion"- livery for Carenado Cessna Centurion
Centurion livery for the Carenado Cessna Centurion by Carenado.
Including panel-normals (customised for this livery and a set for the default -panel)
Read enclosed PDF and follow instructions carefully.
Leen "Flybike" de Jager
http://www.flybike-paints.nl
42 downloads
0 comments
Submitted
-
Piper PA11 Marina D`Or
This is a livery made by Leen "Flybike" de Jager for the Piper Pa 11 Super Cub made by Alcalá Simulación for X-Plane 10 (freeware) .
This livery is not exactly depicting an existing livery , the real model just inspired me.
How to install:
Unzip Marina DOr – EC-CXD.zip into a temp folder.
Placing the "liveries" folder into the main directory installs the EC-CXD livery.
This livery however will have the default wooden propellor.
Placing the complete contents of this upload in the main directory of the plane will give you the plane with its black metal propeller.
( backups provided)
This however will make all other liveries having the same propellor too.
No need to say making, a complete copy of your "Piper PA- 11 Cub Special" -install ,naming that copy "Piper PA- 11 Cub Special Black propellor" and
implementing my upload there , will give you the best of both.
Enjoy
Leen de Jager
http://www.flybike-paints.nl
18 downloads
0 comments
Updated
-
Modified G1000 for Diamond DA-42 (v2.0)- Payware
By Mario Donick
UI Graphics Modification for Harranssor's Diamond DA-42
Mod version 1.4 for aircraft version 2.0
If you are still using aircraft version 1.x, you have to update by re-downloading the aircraft from your .org store account!
Created with written consent of Harranssor (DA-42 author).
Thanks to Harranssor for creating the DA-42 and for giving me the permission to publish this modification. Get the DA-42 here!
1. Goal of this Modification
Harranssor's DA-42 includes a G1000 unit which, in terms of function, goes as far as possible with default X-Plane means. Since aircraft version 1.2, the DA-42 includes most features of my original G1000 mod, thereby having more realistic visuals (icons, fonts, colors).
However, the mod also brought a more realistic layout to the PFD, and these changes were deliberately not included in later aircraft versions.
This new version of the mod is for aircraft version 2.0, and includes the missing changes to the PFD layout. The included .acf file combines all bug fixes and changes that Harranssor made for aircraft version 2.0 with the PFD layout of the original mod.
The .acf file is provided with permission from Harranssor.
2. What this mod isn't
This mod does NOT change the functionality of the simulated G1000; it just changes the PFD layout to make it a little bit more realistic.
3. Installation
Be careful to make a backup of the original DA-42 folder before installing the mod!
Copy the files from the "Copy these files" folder to your DA-42 aircraft folder. Replace the existing files with the new ones.
On MacOS, DO NOT COPY COMPLETE FOLDERS! Copy the files which are INSIDE the folders. I know this is a bit tedious, because there are many folders, but if you do otherwise, MacOS will delete files from the original aircraft which you need to keep! If you see strange buttons on the PFD screen, you made a mistake. You then need to revert to your backup of the original aircraft and start again.
This mod includes a modified .acf file which was necessary for adjusting the PFD. If you have modified your .acf already, you need to do your own modifications again after replacing your .acf file with the mod .acf file. Be careful.
4. Known Issues
The speed tape on the PFD will be hidden by an opened FPL window. On real G1000 units, the FPL window is shown either as small inset on the lower right of the PFD, or on the right of the MFD. You can check your speed using the backup airspeed indicator, though.
58 downloads
0 comments
Updated
-
Balesin Island Club Caravan
This archive only contains textures for the Carenado C208B GRAND CARAVAN V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below. If for some reason you don't like these textures, just delete the folder.
Installation
Open the zip file and move the whole folder Balesin Island Club to X-Plane 10 (where you installed X-Plane)--->Aircraft-->Carenado C208B GRAND CARAVAN V2 (where you installed the Carenado package)--->liveries. That's it!
A note on the Cessna C208B GRAND CARAVAN
The prototype first flew in December 1982. The production model was certified by the FAA in October 1984. Since then, the Caravan has undergone a number of design evolutions. Working with FedEx, Cessna produced first the Cargomaster, and followed that with the stretched and upgraded Super Cargomaster. The passenger model, the Grand Caravan, was derived from the Super Cargomaster. In January 2013 a higher-powered (867 shp from P&WC PT6A-140) version, the Grand Caravan EX, received FAA certification.[2] This higher-powered version will be produced by a Cessna-AVIC joint venture in China. Information taken from Wikipedia.org.
File information
The textures herein are made from the Carenado blanks. I have made every attempt to faithfully reproduce the Alphaland Balesin Island Club Caravan to the best of my abilities. The Balesin Island Club is a resort in the philippines operated by Alphaland Corporation. They use two Cessna C208B GRAND CARAVANS to ferry clients from Manila to the island resort.
45 downloads
- Carenado
- Caravan 208B
- (and 1 more)
0 comments
Updated
-
Trans Guyana Airways Caravan
This archive only contains textures for the Carenado C208B GRAND CARAVAN V2 aircraft. In order for it to work, you need to own this specific aircraft. Since these are only textures, no further support is necessary, just follow the instructions below. If for some reason you don't like these textures, just delete the folder.
Installation
Open the zip file and move the whole folder 8R-GAB to X-Plane 10 (where you installed X-Plane)--->Aircraft-->Carenado C208B GRAND CARAVAN V2 (where you installed the Carenado package)--->liveries. That's it!
31 downloads
- Carenado
- Cessna Grand Caravan
- (and 1 more)
0 comments
Updated
-
DHC-6-300 Twin Otter "BlueHawk Air Taxi" Livery
By Toby Rice
Repaint for the 3D Version of Pedro's (pedrovl on the .org) DHC-6-300 Twin Otter.
This is a repaint for BlueHawk Virtual Airways "Air Taxi"
The plane is a FREEWARE Twin Otter with a 3D cockpit and cabin available to the link to the right.
(It's at the bottom of that page. The 300 Short version)
I made the repaint but other credits for the plane are below.
Original 3D model by Syd Adams / 3D object conversion by gplv3 / X-Plane modeling and adjustments by Pedro van Leeuwen (pedrovl)
NOTE: To make it easier for you to find the right plane, the direct link to the plane download is here: http://aeropedro.despair.ch/Aeropedro/DHC_files/DHC63_TwinOtter_SN-v970-3D.zip
14 downloads
0 comments
Submitted
-
Chilean Para-livery for the DHC6 Twin Otter
Chilean Para-livery for the DHC6 Twin Otter
I have the pleasure (could better say, WE have the pleasure, I think) to share with you a military-camo- version for the freeware DHC-6 Twin Otter Rev. 2D v2.6 & 3D v2.3 by Pedrovl.**
This edition wich can be used in XP9 and XP10 includes many details and refinements.
Its the result of a fruitfull co-operation between all participants in this Twotter-project *
The real plane is used by the Chilean Airforce "Fuerza Aerea de Chile"
To fly this military version you need to have the freeware DHC-6 Twin Otter Rev. 2D v2.6 & 3D v2.3 ,by Pedrovl ,installed.
You can get this splendid plane here::
http://aeropedro.despair.ch/Aeropedro/DHC.html
or here
http://forums.x-plane.org/index.php?app=downloads&showfile=24699&st=20#commentsStart
IMPORTANT:
This livery is for the Long Nose Skydive version only.
Installing this livery in others versions will make it a "flying-see-food-store"
Before installing this livery, you have to “build” the right Twin Otter version:
BasePack (longnose, standard wheels) + Skydive addon
Livery installation Instructions for XP10: Just unzip downloaded file into downloads folder (or wherever you want) and drag unzipped folder: LDJ-Chilean Air Force Para, into the plane`s Liveries folder.
NOTE: if folder “Liveries” does not exist, just create it.
THEN: open the folder ...Liveries/ LDJ-Chilean Air Force Para/ you`ll find a file named Twin Otter_prop.png , copy this file into the root-directory of the aircraft ( only if its not already there)
Livery installation Instructions for XP9: Just unzip downloaded file into downloads folder (or wherever you want) and drag unzipped folder: LDJ-Chilean Air Force Para, into the plane`s Liveries folder.
NOTE: if folder “Liveries” does not exist, just create it.
THEN: open the folder ...Liveries/ LDJ-Chilean Air Force Para/ you`ll find a file named Twin Otter_prop.png , copy this file into the root-directory of the aircraft ( only if its not already there)
THEN: open the folder ...Liveries/ LDJ-Chilean Air Force Para/XP9 normal and copy its contents into
...Liveries/ LDJ-Chilean Air Force Para/objects ( overwriting the existing file)
**WARNING: These Textures and Normals do not match with previous versions of the plane.
CREDITS:
Thanks Pedrovl for the plane
Thanks gplv3 for 3D model and your patience for required improvemets.
Thanks AFNavarro for Normals and much more.
Thanks Bob439 for new Paint-kit and more.
I really hope you`ll enjoy this one.
Leen " Flybike" de Jager
22 downloads
0 comments
Submitted
-
Chilean livery for DHC6 Twin Otter
Chilean livery for DHC6 Twin Otter
I’ve the pleasure( could better say, WE have the pleasure, I think) to share with you a military-camo- version for the freeware DHC-6 Twin Otter Rev. 2D v2.6 & 3D v2.3 by Pedrovl.**
This edition wich can be used in XP9 and XP10 includes many details and refinements.
Its the result of a fruitfull co-operation between all participants in this Twotter-project *
The real plane is used by the Chilean Airforce "Fuerza Aerea de Chile"
To fly this military version you need to have the freeware DHC-6 Twin Otter Rev. 2D v2.6 & 3D v2.3 ,by Pedrovl ,installed.
You can get this splendid plane here::
http://aeropedro.despair.ch/Aeropedro/DHC.html
or here
http://forums.x-plane.org/index.php?app=downloads&showfile=24699&st=20#commentsStart
IMPORTANT:
This livery is for the Long Nose version only.
A version with this livery in use for para-troopers will be available later.
Livery installation Instructions for XP10: Just unzip downloaded file into downloads folder (or wherever you want) and drag unzipped folder: LDJ-Chilean Air Force, into the plane`s Liveries folder.
NOTE: if folder “Liveries” does not exist, just create it.
THEN: open the folder ...Liveries/ LDJ-Chilean Air Force/ you`ll find a file named Twin Otter_prop.png , copy this file into the root-directory of the aircraft ( only if its not already there)
Livery installation Instructions for XP9: Just unzip downloaded file into downloads folder (or wherever you want) and drag unzipped folder: LDJ-Chilean Air Force, into the plane`s Liveries folder.
NOTE: if folder “Liveries” does not exist, just create it.
THEN: open the folder ...Liveries/ LDJ-Chilean Air Force/ you`ll find a file named Twin Otter_prop.png , copy this file into the root-directory of the aircraft ( only if its not already there)
THEN: open the folder ...Liveries/ LDJ-Chilean Air Force/XP9 normal and copy its contents into
...Liveries/ LDJ-Chilean Air Force/objects ( overwriting the existing file)
**WARNING: These Textures and Normals do not match with previous versions of the plane.
*CREDITS:
Thanks Pedrovl for the plane
Thanks gplv3 for 3D model and your patience for required improvemets.
Thanks AFNavarro for Normals and much more.
Thanks Bob439 for new Paint-kit and more.
I really hope you`ll enjoy this one.
16 downloads
0 comments
Updated
-
Alternative N601WD livery for Zenair CH-650
Alternative N601WD livery for Zenair CH-650
Hi friends,
I like to present to you this repaint for the freeware Zenair CH-650 by HydroZ
.
It represents the american N601WD livery.
The N601WD?? You might ask, is`nt that the same livery as wich comes with the base-package for this aircraft?
YES indeed,it is.
Based on the blanks provided by Antonio and using his normals I made a complete remake of this livery.
Having a different texture-layout,color and a "lady-pilot"
You can find the original plane here:
http://hydroz.net/
or here:
http://forums.x-plane.org/index.php?app=downloads&showfile=17084&st=20#commentsStart
Merci, Olivier, for this fantastic small plane.
Thanks Antonio for your superb normals.
Have fun and be nice to the girl
Leen de Jager
7 downloads
0 comments
Updated
-
Ju-52 Collection : Repaint "Milka" (LDJ_Milka_HB-HOP)
Ju-52 Collection : Repaint "Milka" (LDJ_Milka_HB-HOP)
Ju-52 Collection : Repaint "Milka" (LDJ_Milka_HB-HOP)
Dear friends,
Herewith a well-known , or maybe better said a "sweet" livery.
This repaint represents the HB-HOP wich was flown by Ju-Air in Switserland.
They flew liveries for watches, suitcases, beers, sweets and limonade.
Its does not matter how to dress the aircraft as long as it generates funds to fly it , was the philosofy.
Sometimes this results in really weird ( some-people say awfull ) exteriors.
So, like it or dislike it, its a collectors-item anyways.
To fly this livery you must have the Ju-52 Collection, French Marine & HB-HOY installed and you must install this Milka-livery in its liveries-folder.
Download the Ju-52 Collection, French Marine & HB-HOY here:
http://forums.x-plane.org/index.php?app=downloads&showfile=23954
unzip MILKA.zip to a temp folder and copy the folder named LDJ_Milka_HB-HOP into the liveries -folder
Enjoy
AFNavarro & Leen de Jager
PS: Thanks; Paolo, for your complicity on this project.
9 downloads
0 comments
Updated
-
The LV-FOB-livery for the Alcalá Simulación Cessna 170
Cessna 170 LV-FOB-livery , for C170B by Alcalá Simulación
This great little ( freeware in payware-quality) plane is available for download at
http://forums.x-plane.org/index.php?app=downloads&showfile=22871
This plane is available for X-Plane 9 and 10.
Make sure to use the latest Version 1.03 !!!
This paint ( and a bit more) is a joint-venture by
Antonio "AFNavarro" and Leen "Flybike" de Jager
This paint made by Leen is based on the basic-paint-kit AFNavarro made for this aircraft.
The custom-normals for this model ( ondulated-skin effect) have been made by the two of us, its hard to tell who placed which pixel, where.
More important is, we are both very happy with the result.
Some OBJ-files were edited by Leen to add some gloss -effects.
For those who like a bit "older" engine-sounds, Leen created some new sound files.
Most important of all a big THANK YOU to
Alcalá Simulación
thanks AdriánDo you want to fly this livery?
Unzip this download LV-FOB-download.zip to a temp folder and read instructions carefully
Enjoy
Antonio
Leen
11 downloads
0 comments
Submitted
-
Cessna 170B Canadian C-GEXZ livery
Cessna 170B Canadian C-GEXZ livery
http://forums.x-plane.org/index.php?app=downloads&module=display§ion=screenshot&record=247562&id=23114
The Canadian C-GEXZ livery for the Alcalá Simulación Cessna 170
This great little ( freeware in payware-quality) plane is available for download at
http://forums.x-plane.org/index.php?app=downloads&showfile=22871
This plane is available for X-Plane 9 and 10.
Make sure to use the latest Version 1.03 !!!
Credits:
Normal Maps included in this repaint have been developed in collaboration with Afnavarro. Thanks Antonio.
How to install: Just unzip downloaded file into downloads folder (or wherever you want) and drag unzipped folder: LDJ_C-GEXZ, into the plane Cessna 170B 1.03 (or later) > Liveries.
Enjoy.
Leen "Flybike" de Jager
http://www.flybike-paints.nl
16 downloads
0 comments
Updated
-
Cessna 170B , The German D-ESCB
The German D-ESCB livery for the Alcalá Simulación Cessna 170
This great little ( freeware in payware-quality) plane is available for download at
http://forums.x-plane.org/index.php?app=downloads&showfile=22871
This plane is available for X-Plane 9 and 10.
Make sure to use the latest Version 1.03 !!!
When the German D-ESCB Cessna 170B Lucky Lady unfortunately crashed into a wood at Bilbao in 1999 ( no casualties,neverthless damaged byond repair ), the registration D-ESCB was available again.( Germans even re-cycle registrations, " Umweltfreundlich " to the limits!!)
Another Cessna 170B which carries this registration these days, is more or less depicted by this livery. ( a bit old and shabby, full of charm and the feeling of being up there for many hours )
The Lucky Lady livery was made by my friend and partner in paintworks Antonio (AFNavarro) and available here http://forums.x-plane.org/index.php?app=downloads&showfile=23086
Credits:
Normal Maps included in this repaint have been developed in collaboration with Afnavarro. Thanks Antonio.
How to install: Just unzip downloaded file into downloads folder (or wherever you want) and drag unzipped folder: LDJ_D-ESCB, into the plane Cessna 170B 1.03 (or later) > Liveries.
Enjoy.
Leen "Flybike" de Jager
http://www.flybike-paints.nl
20 downloads
0 comments
Updated
-
DGAC F-HCEV livery (v2) for the Carenado B200 King Air
DGAC F-HCEV (V2) livery for the Carenado B200 King Air by Leen "Flybike" de Jager
This livery depicts ( more or less ) the French B200 ( F-HCEV ) used by the Direction génerale de l` Aviation.
Simply unzip and place the folder named LDJ_DGAC_F-HCEV(V2) in the liveries folder of the Carenado B200 King Air.
If you have already installed LDJ_DGAC_F-HCEV , please remove it from your sim.
new for V2
Customised normal-files including specular layers.
Softer (more natural) and corrected bumpmapping with additional surface-undulation, for more realism.
These normals can NOT be used in combination with other repaints for this model.
Enjoy
Leen "Flybike" de Jager
http://www.flybike-paints.nl
37 downloads
0 comments
Submitted
-
Carenado Beechcraft B200 - EC-LJN Livery
EC-LJN livery for Carenado Beechcraft B200 by Leen "Flybike" de Jager
This livery depicts ( as far as far as I can achieve ) the Beechcraft B200 operated by the INSTITUT CARTOGRAFIC I GEOLOGIC DE CATALUNYA
Customised normal-files including specular layers.
Softer (more natural) and corrected bumpmapping with additional surface-undulation, for more realism.
These normals can NOT be used in combination with other repaints for this model.
Installation:
Just unzip into the liveries-folder of the aircraft
Enjoy
Leen "Flybike" de Jager
http://www.flybike-paints.nl
59 downloads
0 comments
Updated
-
ATR72-500 Royal Thai Air Force Livery
ATR72-500 Royal Thai Air Force livery (for McPhat ATR)
By Leen "Flybike "de Jager
This is a livery paint for the McPhatstudios ATR 72-500.
I could not withstand the temptation of doing a livery for the McPatstudios ATR72-500 myself.
Its a big challenge to give an McPhat-plane something extra.
For this one I created my own version of the paintkit ( another paintkit than the one I published earlier)
The object files are edited ( I asked and got permission from McPhatstudios to do so and publish them) and have some features who are needed for this livery .
So, if you already edited the OBJ files according to my instructions as published a while ago , please do replace them by the ones from this upload.
They are full compatible with all default and other custom- liveries.
This livery features;
Extremely detailed e.g. propellors, stairs and wheels.
Bright and almost clean appearance.
More detail on wingtips , pitots etc.
Front door at the right side (just optical, stays closed) dito inside.
Cockpit emergency extit (just optical outside, stays closed)
No leaking light on front and rear-door at night.
How to install:
Unzip to a temp folder.
Place the folder LDJ-Royal Thai Airforce in the liveries folder of the ATR.
Make a backup of the main objects folder of the aircraft.
Then place the files from the objects folder of this download into the main objects folder.
Leen de Jager
http://www.flybike-paints.nl
53 downloads
0 comments
Updated