Jump to content

Geezmokleez

Members
  • Posts

    1
  • Joined

  • Last visited

Everything posted by Geezmokleez

  1. Versions X-Plane 12.4.4-r2 (build 124419), Windows 11, Vulkan TorqueSim SR22 Entegra v2.1.0 (log: "SR22 ENT - Version 2.1.0 Built on: May 13 2026"), S-TEC 55X variant (SR22_AVIDYNE.acf) RealityXP GNS v2 (2.5.1.0), two GNS 430s Wear failures enabled in settings Issue 1: the MFD doesn't power up with BAT 2 alone The AIM's Cabin preflight (Section 3) says: Avionics Power Switch OFF → Battery 2 Master Switch ON → MFD Verify On → Essential Bus Voltage 23–25 V. In the sim: With BAT 2 (or BAT 1) on and AVIONICS off, the PFD powers up and aligns normally, but the MFD stays dark. The MFD comes on only once the AVIONICS switch is on. The GNS 430s also come on with AVIONICS, which is what I'd expect. Same result whether I flip the switches with the mouse in the 3D cockpit or with hardware. All circuit breakers are in. Issue 2: the starter won't engage unless ALT 1/ALT 2 are on The AIM's Starting Engine checklist turns the Alt Master Switches on at step 13, after the engine starts. In the sim, turning the key to START does nothing unless ALT 1 and ALT 2 are already on. With them on, the engine starts normally. Main bus voltage reads about 24.8 V beforehand, so the batteries are fine. To reproduce Quit X-Plane fully and relaunch. Load the SR22 Entegra cold and dark. Turn on BAT 2 only (AVIONICS off). The PFD comes on; the MFD stays dark. Turn on AVIONICS. The MFD and both 430s come on. With ALT 1/2 off, follow the AIM start checklist. The key at START does nothing. Turn ALT 1/2 on and repeat. The engine starts. Not sure if it's new: I first noticed both after updating to X-Plane 12.4.4, but I can't confirm how they behaved before. Workaround for anyone else hitting this: turn on ALT 1/2 before the start, and AVIONICS early if you want the MFD checklists.
×
×
  • Create New...