HeliMaf

Jan, I just had this problem after re-installing the 737 after months of not flying it. My NAV radios did not work no matter what I did. It has to do with the Honeycomb Yoke: Turn Avionics switches to BUS1 and BUS2 to ON, and boom it all works. Its only required if I opt for the "Turn Around" or "Ready To Fly"-options. If I start from "Cold&Dark", the radios work regardless.

Hi guys Having flown XP11 for several months without any hiccups on a new build, I now find myself on the thrid streak of freeze and crash using the TBM 900 (and I installed it a few days ago). It only happens in flight and immediately after manipulating the autopilot (probably a coincidence). I attached the log.txt because I have a suspicion that ORBX True Earth might be the culprit, but since it has only happened while using the TBM, I have to rule it out. Thank you for helping me out! Log.txt

Right! Indeed it was the Honeycomb yoke that was the culprit. I have tweaked it for use with the Zibo, so I`ll just be using my mouse instead. Again Jan, this is an incredible aircraft! I have never held a 737-typerating, but during tech-courses I sat quite a lot in its cockpit in both seats (during flight mechanics training), and had many jump seat rides on it, and you nailed the feeling of really being there, the geometry of the cockpit and so forth. Systemwise as well, great plane. Ive already flown about 30 hours in it. So much fun! I really hope you one day get to do the 4/500 and QC variants. That would have been fantastic! And I would happily pay for it all:-)

Thank you all for helping out! As soon as I have time I will test all of your suggestions and give a feedback.

First off I am a RW-piIot with plenty of hours under my belt, you might be too quick to offer a real world solution to something that might just be a computer hardware issue. Secondly, I just bought the IXEG 737, and I absolutely love it. Awesome add-on! And then to my issue: Whenever I start up XP11 and the IXEG, it works flawlessly. It starts up at my gate, I do the preflight, the checklists, and I take off. I enjoy my flight and then I land at my destination. No problem! Then, I taxi in, shut the aircraft down and do the turn-around. If I decide to stop it here, and quit X-plane and restart later, I will NOT have ANY problems or issues at all. The PROBLEM and ISSUE comes when I decide to continue for a second cycle without any restart of XP11 or the IXEG 737: The take off warning config horn WILL sound on my second cycle take off, REGARDLESS of my airplane condition: Flap 1 or 5 set, speedbrakes NOT armed (fully down), NO parking brake and trim IS in the green band. I have Honeycomb throttle hardware, and I have started to suspect that this might be the issue, but IDK. Very strange how this happens on EVERY second cycle without fail. ( and I have flown it for hours already, and this happens every single time). Thank you for helping out! Greatly appreciated!