CubPilot

Hi I am using Honeycomb Alpha yoke and it has Starter switch (group of switches OFF, R, L, BOTH and START) I can see it is linked with (OFF -> Magnetos off for engine #1, R switch -> Magnetos right for engine #1, L -> Magnetos left for engine #1, Both -> Magnetos both for engine #1 etc) but none of this works with PT-19, it works with other Payware and default aircrafts quite well. now fact that magnetos in PT-19 is in difficult to reach and see location, this issue makes it even more inconvenient to reach out and to operate, is there any other way to make it work??

Hi I am having this issue of rudder is ineffective during take off roll and plane always weather-cock. During climb and cruise left turn tendency is way too high. I tried to capture these problems in following videos. One can see that at 12:23 aileron is neutral but plane keep turning left at very high bank angle. I have also captured some of reference data related to aileron, rudder and elevator for reference. Plus difference in ground traction between grass and tarmac is huge, more than 2000 rpm is required to very slowly move along grass but on tarmac this is way too much power for normal taxi. I tried to open account in discord but it is very temperamental. Ps. First try at Qamdo Bamda Airport (BPX) in the mountains of Tibet didn't work, (I chose that to practice take off roll as it has longest run way in world but may be altitude of this airport is way to high for this a/c limit and so it was quite under power) so I decided to try it out at Heathrow. I watched few videos of real plane and either pilot is way too adept pilot or in RL weathercock effect is not that intense. Now I have seen Graham from ReflectedReality youtube channel (in fact inspired by his video I bought this aircraft) and he had no difficulty at all, also he mentioned about rudder trim I don't think this plan has rudder trim. I wonder is there any settings to fine tune this effect??? I use MFG Crosswind V2 rudder pedals also tried, Thrusmaster T20 Sidestick twist axis for rudder but no luck. I think I have latest version of this aircraft as I bought it in 2021 ( so must have update 1.02)