sdrpa

Good catch! After removing Avitab from X-Plane 11\Resources\plugins\ all work fine. Should be a simple fix.

I bought GTN 650 license and tested GTN 750/GTN 650 combination but still there is a black rectangle blocking GTN 750 screen

I have GTN 750 license, I set it up according https://www.togasim.com/mu2docs/setup/realityxp.html but GTN 750 is "blocked" by black rectangle (see attached screenshot) Could you check GTN 750/GNS 430 work correctly? P.S. I don't have license for GTN 650, only for GTN 750 (that's why I'm using GTN 750/GNS 430 combination)

I changed units to kg in careeer mode (on create aircraft window) it worked fine. But in the non-persistent mode the settings are ignored, aircraft always uses lbs in non-persistent mode even though when I open settings meters and kgs are set. Is there a specific way to change to kg in non-persistent mode?

SR22_AVIDYNE and SR22_AVIDYNE_DFC90 GTN750/GNS430 integration works fine on both planes with the new update (v1.0.2)! Thank you for your support,

I tested GTN750/GNS430 integration on v1.0.1 update. The GTN750 works on v1.0.1, left outer/inner GNS430 knobs work, that is fixed, but new issues are created with v1.0.1 update. Now: Right outer/inner GNS430 knobs are disabled (inop) when GTN750 is enabled, There is no way to switch standby/active VOR freq on GNS430 when GTN750 is enabled. Pressing the button to switch - it switches freq. on GTN750 instead of GNS430. On DFC90 version, right outer/inner GNS430 knobs work but still there is no way to switch standby/active VOR freq on GNS430 (it switches on GTN750 freq. instead). I tested both 750_430default and 750_430rxp configs from RealityXP_Configs. P.S. The same happens with COM1 and COM2. Switching standby/active COM freq on GNS430 in fact changes the freq on GTN750 (GNS430 freq doesn't change). On Cirrus SR22TN(Avidyne)DFC90 all works correctly! Can you adjust the configs that all work (the same as on Cirrus SR22TN(Avidyne)DFC90) on other 3 SR22 Entegra versions? Thanks, 715378944_X-System2021-04-0519-26-40.mp4

1. Are you using https://torquesim.s3.us-west-2.amazonaws.com/sr/entegra/RealityXP_Configs.zip or default config? 2. Do you have GTN650 installed also with GTN750? I’m wondering maybe the problem appears because I’ve bought GTN750 only (without GTN650)? Thanks,

Thanks, I tried the new RXP configs with all 4 aircraft but it doesn't make any change. I copied RealityXP.GNS.ini and RealityXP.GTN.ini from 750_430default folder to Aircraft\X-Aviation\SR22 Series Entegra and Aircraft\X-Aviation\SR22 Series Entegra\TorqueSim SR22TN Entegra folders overwriting old files then run X-Plane (I tried also RealityXP.GNS.ini and RealityXP.GTN.ini from 750_430rxp folder) : On SR22_AVIDYNE and SR22TN_AVIDYNE - GTN750 screen is black and GNS430 both left and right, outer and inner knobs are inop. On SR22_AVIDYNE_DFC90 and SR22TN_AVIDYNE_DFC90 - GTN750 works, but GNS430 left outer and inner knobs are inop. I have RXP GTN750 installed, I don't have GTN650. I attached short videos with the post to illustrate the issue. P.S. Just to make sure it doesn't affect the issue above, I got also: "There was a minor problem parsing the VRCONFIG: 0:06:24.278 E/SYS: | Aircraft/X-Aviation/SR22 Series Entegra/TorqueSim SR22TN Entegra/SR22TN_AVIDYNE_vrconfig.txt" on loading the aircraft. 176854003_X-System2021-03-2816-30-20.mp4 2022463859_X-System2021-03-2816-32-26.mp4

Hi, I installed Take Command!: SR22 Entegra Series last night. Here are some problems with Reality XP GTN 750 and SR22 Entegra: 1. On SR22 Entegra (non TN) version, Reality XP GTN 750 doesn't work (GTN 750 screen is black), 2. On SR22 TN Entegra (DFC90), Reality XP GTN 750 works but there are some problems: Once GTN 750 is enabled, GNS 430 left outer and inner knobs become disabled (you can't change freq. on GNS 430 while GTN 750 is enabled) You can change nav. freq on GTN 750, but changes aren't reflected on GNS 430 and also not reflected on Entegra PD