PT6driver

"Lift both power levers..." That fixed it. I must have reassigned it and forgot how to fix it. Thank you!

T.Flight Hotas One with a detent at 50% travel. It's not the XBOX/PC switch or button. I can click and drag the power levers over the gate and then manipulate the entire range from beta to alpha but as soon as I drop into the alpha range, I cannot get back into beta. I checked the bindings, response curves, or preferences. I have recalibrated the Hotas a few times. I reset all failures more than once. The button to lift the power levers stopped working around the time I was practicing engine failures on rotation but it did not fix the problem. I will keep trying but it is a bummer. I love this model. Thanks for the ideas. I thought it was the Cold/Dark vs Start with engine running option but that is not the case.

I can no longer use my "toggle reverse thrust" button to bring the thrust levers from alpha to beta range. Changing button assignment does not change the result. "Move both power levers to reverse from ground idle" does not work, either. I can mouse drag them into either range. 12.2.0-b7 <- the only change.

Solved. Hardware strikes again. Still no clickspot for the MFD knob. TDB

The aircraft worked great yesterday and all of a sudden, no ability to steer on the ground. I get full rudder deflection and partial nosewheel deflection, but not the entire range. I've tried unchecking the chocks, saving perfs, and restarting. I've tried reinstalling. I've tried swapping to other aircraft and back. Yaw Damper is off. T.Flight Hotas One is configured and calibrated. Laptop has been restarted a few times. The switch is on PC, not XBOX. I remember switching from XP12, to MSFS, and back to XP12 and then no steering. Is it something with FSUIPC7? Mu-2 is 2.1.0 Unrelated, but I don't have any clickspot on the MFD for the G5/600. Purchased and installed yesterday. Log.txt

Hi, It seems like I'm having a similar issue to another member on here with the "ILS not working" so to speak. I'm flying from KFSM to KFYV via FSM and the LDA/DME 34 (attached). The issue that I seem to have is capturing the LOC from an LNAV state. Yes, the freq and course are correct. The airplane captures the "final approach course" in LNAV but never actually captures the LOC (both LOC and GS are armed, white). I have uploaded the approach procedure and two screenshots. The first screenshot shows the aircraft on the 006 radial from FSM heading towards the intercept with APP mode selected. The second picture shows the aircraft on "course" but without the LOC being captured. I'm just trying to figure out if this is IXEG specific issue/bug or true to life (which I don't think). The IXEG will not descent on the G/S in LNAV, either. I have replicated this exact flight and configuration with the FF B767 and it does capture the LOC and GS from LNAV. Thanks for any help or clarification. 00728LDAD34.PDF

It took a looong time and I burned the engines up, but I made it to FL410.

I bought version 4 last night. I'll be taking a look at xEnviro here soon. Those pictures look great.

Ok, great. I appreciate you taking a look at a potential implementation. Thanks for the quick reply.

So, just to confirm - there is no possible way to have the joystick "throttle" operate the airplane's power levers from full power to min. idle and then, by the push of a button on my joystick, be able to move the joystick's "throttle" so that it commands beta to full reverse? This being done as if they were two independent power ranges switched by the push of a button. Just purchased the airplane after a long time of thinking about it. Incredible job. This power lever issue would is my only complaint. Look forward to the Citation's release.