larsras

I have just tried the G500 on XP12. As other previous have posted, I also get a crash when loading the C172 G500 plane. Any news on some updates for XP12?

EKYT

"Same place..." do you mean same geographical location or? Initially I discovered this issue during flights. The last number of tests I did was just loading the C172/G500 at my home airport. Turn on Bat Master and avionics 1/2 (for other avionics), and the leave it there on the ground. Crashes still happened.

I try to use the G500 popped out (so far only on the C172). I however have to do the pop-out/in (via menu) 2-3 times before I can grab and move the window. 1st time it is quite large and top is outside x-plane window, so I can't grab it. 2nd time it is somewhat smaller but usually still outside the window. 3rd. time it normally pops somewhere fully inside xplane screen, and now I can move it to preferred location.

I have a very stable Xplane setup, using xToolbox and xOrganizer so I only have stuff loaded I really need for a particular flight. Yesterday I bought the G500, and since that I have crashes within an hour, even with the C172-G500 turned on, just sitting on the ground in that time. Most often Xplane crashes completely, but a few times I have seen the G500 go blank but the rest of the plane still works. Here I can use Bat Master and Avionics 1/2 and everything reacts on that except the G500. Gizmo64 console and stats are completely blank. I'm now down to a cleaned Xplane installation (no additional planes and scenery, but some essential plugins). I still see the xplane crashes. What is going wrong here? Can I enable Gizmo64 logging somehow? Log.txt plugins.txt

My system has a 1080 with 8GB. Used VRam seen in XP, is 3.5-3.9 in current situation. PC has 32GB. Besides that i have stopped using SMP, as it totally kills my framerate. Without SMP i have 60, and as soon as i enable SMP it drops to 20. That is with 2 x volumetric on. If i turn the first volumetric off, it is flyable again, but i then see the ground skyclear, when the weather is actually Fog and visability 0.1 km. Not realistic. But XE116 is also not usable on my system, so just using default clouds now.

X-Plane 11 11.51r1, using ASXP and RWC. Discovered with 5.0.1, but also present in just installed 5.0.5. When i have changed the cloud textures a few times then XP crashes, and log says due to plugin SkuMaxx Pro

Great, thanks! :-)

Yes I should of course use this in the sign of realism, but it's just that I'm used to the XChecklist for other planes, being able to add custom actions.

So I don't have to do it :-)

Is it possible to program a switch on the throttle to do the sequence: Fuel cut off, lo idle, hi idle (and reverse with the switch down)?

My 2nd load hang problem disappeared with the 1.0.1 update.

I want to revert to v3 then. Just uninstalled v4 and rwc 1.1, restarted and installed v3.3.2 and rwc 1.0. It just looks like I doesn't get any weather effects now (and switching RWC from never to one of the 2 others has no effect at all). Isn't it possible to downgrade?

Standing on the runway in fog condition, I have 20-23 FPS. If I switch RWC from either Automatic or Always to Never I have 39-43 FPS. Same happens in flight. I believe my setup using V3 actually worked quite well and smooth, and I certainly didn't expect a decrease in performance like that. btw. According to X-Plane I'm using 1100 MB in textures.

Just took a short flight in XP-10 with latest Skymaxx pro 3 installed. I had the usual 35-45 FPS in the local area where I most often fly. Then I bought and installed v4 (and the RWC update), and took the same flight. Now I have FPS 15-25. Really not usable. Had a quick look at the Skymaxx settings, but looked as what I normally have setup. Can this really be true that v4 drops the FPS so much? System is a i7 6700 4GHz with GTX970/4GB and 3 monitor setup (Nvidia Surround).

My X-plane also always crashes now during startup, after the recent Skymaxx pro update. I don't have NOAA weather plugin installed!