jc7337jc1

Cameron, Thank you for your help. It worked. You are always helpful.

To Whom It May Concern, After updating SR22 Entegra to v2.0.4, and loaded it, none of the aircraft functions work. I noticed that usually when loading X-Aviation products after an update, there is the XAviation pop up requiring a sign on into the system as a verification process. In this case there is not popup, and no notice that the product has been activated. Then I tried all other XAviation Addons, and nothing works. Please advise. Sincerely Joseph Correia Log.txt

The Popup Green Push buttons, when pushed highlight the respective selection, but the Round Knobs, when turning them, do not make the adjustment to the selection.

The rotating selectors on the PFD & MFD Popups do not work. Also it would be nice if the PFD & MFD Popups stayed where we placed them for the flight. Presently they go to different locations every time they popup.

Upon loading SR22 Entegra (all versions) the following error message pops up: 0:06:24.278 E/SYS: | There was a minor problem parsing the VRCONFIG: 0:06:24.278 E/SYS: | Aircraft/X-Aviation/SR22 Series Entegra/TorqueSim SR22TN Entegra/SR22TN_AVIDYNE_vrconfig.txt 0:06:24.278 E/SYS: | You may need to update the airplane or report this to the airplane's author. 0:06:24.278 E/SYS: | Please see the log.txt file for detailed error information. 0:06:24.278 E/SYS: | (vr_manips.cpp:471) 0:06:24.278 E/SYS: +---------------------------------------------------------------- Log.txt File attached. Please advise. Thanks Log.txt

Thank you so much for the information and prompt responses. It works as programed.

To Whom It May Concern, Thank you for all the new improvements on this update and the inclusion of the MOTORING START but I have an issue that requires your help. Regarding the new Startup Procedure (MOTORING START) I would like you to explain to me how am I going to be able to, using a mouse, Hold Start Switch to appropriate side, and while still holding it, SET IGNITION SWITCH TO "NORM". Please advise. Joe C

Thanks

How can I program the Condition Levers on my Throttle Quadrant to move the Condition Levers of the Aircraft. Please advise. Thanks

Thanks Lon. Just built a new hangar, installed a hardened steel lock and hired a security guard 24/7.

Thanks for the prompt response. Popups when clicking the screen. Did not know that there are also bezel-less popups nor how to bring them up. Also the Ignition switch turns and gets the engine started without the key inserted.

Every time I X Out of PFD & MFD Popups, and bring them up again, they go to a different location. Have to adjust every time which is a pain. Perhaps next update you could fix that, and if possible to have the aircraft maintain Popup size and location for the next flight. Thanks for the great aircraft.

Hi Coop, Thanks for the response. You are right, when I disengage the chocks the Parking Brake lever can be moved and responds to both mouse and key commands.. What threw me off was that before the update, the Parking Brake was in the ON position by default. You guys are the best. Thanks.

Thank you for the prompt response. Removed Real View plugin. Result is the same. Also, don't know if it is important, but when I apply the foot brakes, the pedals don't move forward in a smooth motion. They jump forward and back. Don't know if the brakes work, since I have not started the aircraft because of the Parking Brake issue. Log.txt

v1.0.1 UPDATE. With this update Parking Brake is in the off position by default and does not respond to mouse nor keyboard commands. Please advise. Thanks Log.txt

Congratulations go out to the Torque Sim Team that put together this wonderful bird. This is my first aircraft from Torque Sim and a happy customer. Looking forward to see the next update with the integration of GTN 750. Hope that you continue to develop aircraft for X-Plane. X-Plane needs a Team like yours, "A Cut Above The Rest" THANKS

To Whom It May Concern, I just wanted to congratulate the team responsible to create BN-2-26 ISLANDER for X-Plane 11. This is my first product from Torque Sim and based on my experience you are a cut above the rest. Hope you continue to make available to the X-Plane community products of the same great quality. Looking forward to the the next update and the compatibility with GTN. Thanks JC55JC