Two issues with v1.1.1 of the NG40

[azpilot61]

First the DA40NG starts fine and no further crashing when the G1000 screens are popped out and everything seems so far to work perfectly. Thanks!

1. Once the DA40NG is loaded, going back to the X-Plane Main Menu to choose another aircraft there is a 3-4 second delay when you select another aircraft so clicking around on several aircraft at the main menu causes much delay waiting for the selection to highlight. Once you no longer have the DA40NG loaded and you have any other aircraft loaded, the delay is gone in the main menu

2. Pop-out screens at night are not auto detecting day and night correctly. The menu setting in the PFD is set for Auto and when starting up at night you get washed out screens until you manually go into the menu on the PFD and change the settings for PFD/MFD to about 4%. This then creates an issue during the day when you load it since at 4% the screens are black and you have to go back into that menu and adjust again. Stock G1000 aircraft do not exhibit this issue and Auto Setting works fine for day and night

Log.txt

[azpilot61]

Delay is a symptom of the 12.1.3 beta builds, the 12.1.1 and 12.1.2 work fine and no delay in the main  menu when selecting other aircraft. This only happens in the beta builds and affects not only the DA40NG but the LES C23 Sundowner 2.5 as well. The SR22 somewhat has delay but not as bad as the DA40 or C23 Sundowner

Edited yesterday at 08:07 AM by azpilot61