slimit75 Posted January 22, 2022 Report Share Posted January 22, 2022 (edited) During cruise yesterday my ATS failed, and since then I have been unable to use it. It is not a flashing "FAIL" message, like what comes on after using reverse thrust, but rather is a solid "FAIL" message. Pressing the disconnect button on the throttles do clear the message, but does not allow the ATS to be engaged. All circuit breakers are in, and I have tried resetting the auto throttle breaker multiple times. The ATS PIDs in the study menus also just say "PID RESET". I have also checked the failures menu, and saw no failures. Any ideas? Edited January 22, 2022 by Pils Forgot about failures menu Link to comment Share on other sites More sharing options...
slimit75 Posted January 22, 2022 Author Report Share Posted January 22, 2022 I feel really silly now. It turns out that I accidentally had the "FMS 3" switch on the bottom right of the aft pedestal was set to "1" instead of "NORM", switching it back to normal allows the ATS to be engaged. Link to comment Share on other sites More sharing options...
Recommended Posts