Brakes not working

[Oreo420Dank]

So I did everything got it started and then started my taxi, so when before I released I ran the engines up and it didn't move but when I released the park brake the aircraft didn't stop moving even with the park brake set. I have the brakes set to a button my honeycomb yoke as I don't have rudder pedals, I have tried all the different brake options on the button. 

The aircraft continues to roll/slide on its own even with park brake set 

Edited January 18, 2022 by Oreo420Dank

[leha74ru]

by default, the following buttons, normal brakes "B", parking "V". hold down the regular brakes(B), then parking brake(V) after that both buttons can be released. the plane is on the parking brake

Edited January 18, 2022 by leha74ru

[Oreo420Dank]

So when I set the park brake the aircraft continues to roll/slide thats the issue im having 

2 hours ago, leha74ru said:

by default, the following buttons, normal brakes "B", parking "V". hold down the regular brakes(B), then parking brake(V) after that both buttons can be released. the plane is on the parking brake

 

[leha74ru]

24 minutes ago, Oreo420Dank said:

So when I set the park brake the aircraft continues to roll/slide thats the issue im having 

 

if you turn it on correctly and at least pump 3A is turned on, then everything works normally

 

if no one answers, then when I'm near the simulator I'll write what commands are assigned to the buttons

Edited January 18, 2022 by leha74ru

[leha74ru]

https://forums.x-pilot.com/forums/topic/22543-parking-brake-and-brakes-issue/#elControls_170300_menu

[Oreo420Dank]

1 hour ago, leha74ru said:

if you turn it on correctly and at least pump 3A is turned on, then everything works normally

 

if no one answers, then when I'm near the simulator I'll write what commands are assigned to the buttons

I had all the pumps turned on, Thanks