VirtualCPT Posted January 16, 2022 Report Posted January 16, 2022 Hello, Welcome to the official support forum for XMidiCtrl and many thanks for using my plugin! If you have a problem or question, I'm more than happy to help you. In case of errors, I would appreciate if you could attach the X-Plane log (Log.txt) and the XMidiCtrl_Log.txt file to your question. Both files can be found in the X-Plane root directory. If you are having problems with your MIDI controller, please ensure that it is setup correctly to send MIDI Control Change (CC) messages. Other message types are currently not supported. I created a step by step manual how to setup the Behringer X-Touch Mini:https://mauer.github.io/xmidictrl/#/behringer_xtouch_mini Many thanks, Marco 1 Quote
voxan Posted January 17, 2022 Report Posted January 17, 2022 Hello, I inaugurate the support! I have this message as error " 'could not open inbound port '0' for device 'Behringer X-Touch Mini' " . An idea ? Thanks Remi XMidiCtrl_Log.txt Log.txt Quote
VirtualCPT Posted January 17, 2022 Author Report Posted January 17, 2022 (edited) Hi @voxan, There are two possibilities: 1. Your MIDI controller doesn't use port 0. Can be easily checked by going to Plugins -> XMidiCtrl -> Show MIDI Devices 2. Your MIDI controller is already used by some other software. Unfortunately, it's a limitation of Windows. Make sure X-Touch Editor etc. are all closed. PS: Would be great to create separate topics for support requests, otherwise it gets rather messy :-) Edited January 17, 2022 by VirtualCPT Quote
voxan Posted January 17, 2022 Report Posted January 17, 2022 Thanks, X-Touch Editor was not closed... 1 Quote
Tom1 Posted January 19, 2022 Report Posted January 19, 2022 I had a go with XMidiCtrl and got it working to control all throttles via a slider and it seems good: { ch = 1, cc = 19, type = "sld", dataref="sim/cockpit2/engine/actuators/throttle_ratio_all", value_min = 0, value_max = 1 }, It doesn't seem to support arrays though, e.g. float[engines], so it can't control engine 1 or 2 separately. Am I missing something, or is this not currently implemented? I was trying to use throttle_ratio[0]. Thanks Quote
VirtualCPT Posted January 19, 2022 Author Report Posted January 19, 2022 4 minutes ago, Tom1 said: I had a go with XMidiCtrl and got it working to control all throttles via a slider and it seems good: { ch = 1, cc = 19, type = "sld", dataref="sim/cockpit2/engine/actuators/throttle_ratio_all", value_min = 0, value_max = 1 }, It doesn't seem to support arrays though, e.g. float[engines], so it can't control engine 1 or 2 separately. Am I missing something, or is this not currently implemented? I was trying to use throttle_ratio[0]. Thanks The support for arrays is still on my todo list. I plan to implemented it this weekend :-) Quote
Tom1 Posted January 20, 2022 Report Posted January 20, 2022 Another thing - sim/cockpit2/engine/actuators/prop_ratio_all is back to front, so could we have value_min = 1, value_max = 0, or a way to reverse the slider? Quote
VirtualCPT Posted January 20, 2022 Author Report Posted January 20, 2022 7 minutes ago, Tom1 said: Another thing - sim/cockpit2/engine/actuators/prop_ratio_all is back to front, so could we have value_min = 1, value_max = 0, or a way to reverse the slider? Already implemented - will be released with the next version :-) 1 Quote
Tom1 Posted January 20, 2022 Report Posted January 20, 2022 Pressing buttons on my Akai MIDIMIX, they show up in the MIDI Messages tab with channel of -31 for the press and -47 for the release. The status is always 144 for press and 128 for release. They have the correct CC number. Quote
VirtualCPT Posted January 21, 2022 Author Report Posted January 21, 2022 Hi Tom, A negative channel number is an indicator that the MIDI message was not of the type "Control Change". I'm going to improve that in the future, so that the message type will be displayed in the log window. In column Raw Data you see the message received or sent. Status 144 is "Note On" for channel 1, and 128 is the "Note Off" message. Can you reconfigure your AKAI to send CC messages instead? I'm going to implement support for note on/off and program change messages in the future, but that's a larger project and not done within a couple of hours. Quote
Tom1 Posted January 21, 2022 Report Posted January 21, 2022 Ah okay - makes sense. I'll try to reconfigure it. Thanks. Quote
Huma Posted February 5, 2022 Report Posted February 5, 2022 Thanks for this great tool. It is so great to have knobs for ALT and HDG. I have a question about signals from X-Plane to X touch mini. If a activate HDG mode, for example, the light on my X touch mini will be still off. And I haven‘t found the failure, yet. Thanks for answers… Greets from germany Quote
VirtualCPT Posted February 5, 2022 Author Report Posted February 5, 2022 Hi Huma, Many thanks for the kind words. Could you send my your toml and XMidiCtrl_log.txt, please? It's probably a tiny problem in the configuration. Would be also helpful to get screenshots of your config in the X-Touch Editor tool. I remember there is a setting that controls how the lights are triggered. Have you applied the Layer bin files to the device? Kind regards from Upper Franconia Quote
xXCAVEDWELERXx Posted February 28, 2023 Report Posted February 28, 2023 Is there a way to program a switch that is in the Challenger that is three positions with the value of center 0, top 1, bottom 1? Quote
Frankytheflyer2 Posted March 9, 2023 Report Posted March 9, 2023 Hello and Good Morning ! I am trying to get a Loupedeck running with an Tollis A319 or A321. Need it to select hdg and the required FCU units... however, I can't get it working..tried the the midctrl 1.04 according the installation guide, bus in fact its not working.The system is a windows 10, with Xplane11 and / or Xplane12. the unit is a Loupedeck ct , wich should do the same than the Loupedeck live ... May be you can help me to get the sytem running Kind regards from little old Germany , Frank Quote
HussamAli Posted September 12, 2023 Report Posted September 12, 2023 I installed it for the Challenger 650, used your template thanks for that. When i turn knobs, the selected values increase, but when i turn counterclockwise, values keep rising! Sometimes it works, if i wait a while, turning the other way will decrease. Strange ! Any ideas whats going on and how to fix this? Buttons below the knobs dont seem to react or work. Thanks, Quote
VirtualCPT Posted October 2, 2023 Author Report Posted October 2, 2023 Hi HussamAli, I think you contacted me on the org forum, as well. I assume that you did not setup your X-Touch correctly. Did you follow these steps?https://mauer.github.io/xmidictrl/#/behringer_xtouch_mini Thanks, Marco Quote
VirtualCPT Posted October 2, 2023 Author Report Posted October 2, 2023 Just a quick reminder - if you run into any problems or need support, best practise would be to open a new thread for each problem. Otherwise I might not see your message, which would be a shame. Quote
goldjunge Posted November 17 Report Posted November 17 Is there a way to control the LEDs of the encoders specifically? I would like e.g. when setting the NAV-modes of "my" Airbus the corresponding LED lights up? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.