Jump to content

Recommended Posts

Posted

Today I also suffered from Stuttering. Fresh x-plane copy, crj in LESA, 30 FPS (but it lasts for nearly 30 minutes, then 19 but that problem must be related to me for sure), LEGS screen showing and stuttering comes to me.

Here you have 2 videos, stuttering is low in the video, but annoying in RL. It's something you can live with, but a little annoying.

http://smg.photobucket.com/albums/v235/bokepacha/?action=view&current=X-Planemovie_CRJ200_1.mp4

http://smg.photobucket.com/albums/v235/bokepacha/?action=view&current=X-Planemovie_CRJ200_2.mp4

System specs:

Number of cores 4 (max 4)

Number of threads 4 (max 4)

Name AMD Phenom X4 9600

Codename Agena

Specification AMD Phenom 9600 Quad-Core Processor

Package Socket AM2+ (940)

CPUID F.2.2

Extended CPUID 10.2

Brand ID 11

Core Stepping DR-B2

Technology 65 nm

TDP Limit 95 Watts

Core Speed 2311.0 MHz

Multiplier x FSB 11.5 x 201.0 MHz

HT Link speed 1808.6 MHz

Stock frequency 2300 MHz

Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V

L1 Data cache 4 x 64 KBytes, 2-way set associative, 64-byte line size

L1 Instruction cache 4 x 64 KBytes, 2-way set associative, 64-byte line size

L2 cache 4 x 512 KBytes, 16-way set associative, 64-byte line size

L3 cache 2 MBytes, 32-way set associative, 64-byte line size

FID/VID Control yes

FID range 5.8x - 11.5x

Max VID 1.250 V

P-State FID 0x7 - VID 0x1C - IDD 19 (11.50x - 1.200 V)

P-State FID 0x107 - VID 0x28 - IDD 14 (5.75x - 1.050 V)

video

Nvidia Geforce GTX260 896 MB

yes this kind of shuttering is annoying of course - what is your framerate while recording this video?

Tom

Posted

I went from 29-30 to 20-22

I suffer from severe lack of frames but not due to the CRJ. It happens to me since the first day. I use to have 1/4 of the frames others have with the same specs.

I'll try ro record a better video because you can barely see the stutter in the videos but is very easy to see in RL

Posted

Interestingly enough, you guys seem to get shutter, but i don't get any BUT i have VERY low framerates on the EFIS displays, like 1 fps. I wonder if this has to do with a driver issue more then anything else.

Just my two cents.

Posted

I had the same problem, my FPS are in the 35 -40 range and the outside world was stuttering along but what made the world of difference was getting the FMC off the legs page and setting it on the index page.

System Manufacturer: Gateway

System Model: FX530

              BIOS: Default System BIOS

              Processor: Intel® Core2 Quad CPU          @ 2.40GHz (4 CPUs), ~2.4GHz

              Memory: 3580MB RAM

              Page File: 1404MB used, 5169MB available

Card name: NVIDIA GeForce GTX 460

Manufacturer: NVIDIA

        Chip type: GeForce GTX 460

        DAC type: Integrated RAMDAC

        Device Key: Enum\PCI\VEN_10DE&DEV_0E22&SUBSYS_13603842&REV_A1

        Display Memory: 2272 MB

        Dedicated Memory: 738 MB

        Shared Memory: 1534 MB

        Current Mode: 1920 x 1200 (32 bit) (59Hz)

Posted

Many posts here have shown the LEGS page of the FMS is the culprit.

I have this on my radar.

For the time being, I can only advise you to only show the LEGS page when you need to look up information there.

@Jack Skieczius:

Display refresh rates of 1fps have not been reported by anybody else so far. However, I remember yesterday posting an answer to you about how other plugins using openGL might interfere with the CRJ. I clearly remember posting this as an answer to your question, you should be able to find it.

Philipp

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...