DeltaV Posted January 13, 2019 Report Posted January 13, 2019 As of 1.1.4 Once I have completed my startup, I try to set my Rudder and Elevator trim for takeoff and they don't move on the MFD indicator. I can see the trim button move on the yolk so I know that the joystick mapping is correct. Whats going on here? Thanks
YYZ342 Posted January 13, 2019 Report Posted January 13, 2019 Check your damages...same thing happened to me this morning too. Somehow damages happened it prevented trims from working.
DeltaV Posted January 13, 2019 Author Report Posted January 13, 2019 I check my maintenance logs before every flight. All is green.
XP_Pilot Posted January 13, 2019 Report Posted January 13, 2019 Is your "AP Trim Switch" in the on position in the upper panel?
DeltaV Posted January 13, 2019 Author Report Posted January 13, 2019 30 minutes ago, XP_Pilot said: Is your "AP Trim Switch" in the on position in the upper panel? yes part of startup checklist.
DeltaV Posted January 13, 2019 Author Report Posted January 13, 2019 I'm thinking about starting a new airframe to see if that works but then I have to start all over again.
DeltaV Posted January 13, 2019 Author Report Posted January 13, 2019 2 hours ago, YYZ342 said: Check your damages...same thing happened to me this morning too. Somehow damages happened it prevented trims from working. I checked my damages again after shutdown and there was magical damage to multiple surfaces. All fixed now. 1.1.4 update glitch. Thanks all.
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now