eomer

The CPU is not overclocked. There is only one XMP profile enabled for RAM which gives a lot of stability to the system

You don't believe me. I haven't installed anything apart from the plane. Absolutely nothing. I've only calibrated the flight controls and lowered the monitor resolution. If anything has been added that could affect the rendering, it would be reflected in the file I uploaded. I'm not lying. Again, the problem is with your software, XP12 or both I resign. But I think it's a pity. I think it's one of the best aircraft (if not the best) currently out there for XPlane

I've just done a clean install of XP12, i.e. completely uninstalling and reinstalling from the Steam site. Then I installed and activated the plane (version 1.5.2) and only the plane. I haven't installed anything else. The only changes I've made to the simulator are calibrating the flight controls and lowering the monitor resolution to 1920x1080 After this test (for me definitive) I see that the problem is not in the plugins or add-ons of other developers. The problem is with the plane, either XP12 has it or both. I don't know what it could be, but the truth is that if with a clean installation this fails... We're not doing well. I corroborate Stephan737's comments, that's the way I see it crashing on my computer. I will definitively uninstall this aircraft and wait for you or Laminar to provide a solution... if there is one. Meanwhile PMDG at MSFS Log.txt

I removed the SimHeaven scenarios I removed the non-essential plug-ins I have put the real weather in manual mode I installed the aircraft update you released today I installed the latest version 537.34 of the graphics card drivers I do not know what else to do, other than go to another computer (not prepared) install everything again and try. I'm sure I'd lose the software licenses because of that. I really wanted this plane since you announced the update for XP12, but now after all the attempts and tests I only feel frustration I know from experience that no software is free of bugs or bugs ... But from that to not being able to use it? I know that it is not a problem of XP12 since other aircraft such as the 767 and 777 of FlightFactor, the 747-800 of VMAX or the SIAI-Marchetti SF-260 of JRollon, all of them complex and detailed aircraft, work with total normality. A shame Log.txt

Is it possible to disable ATC?

I currently only have the SimHeaven stage set for Europe. I will try with some airport in the US or Asia and I will also try to move the folders as indicated The hardware I use is: Asus WS X299 Pro i9 9820x 64 GB DDR4 - 4 channels EVGA RTX 3070 Which one can be the one that is limiting? I don't rule out an update

Yes, I always have the real-time weather download option enabled. I will try in manual

The problem arises from the external view (Shift+4) And it always happens Regards Log.txt

Yes. Correct I have made several attempts only and only with IXEG and the same failure occurs FlightFactor's 767 also uses its own plug-ins, but these are not present when loading the IXEG plane.

The same thing happens to me. In external view, during the taxi the sound disappears and xplane suddenly closes. He just doesn't respond. I have disabled some plugins such as Better pushback or Airport Navigator, but it still gives the same problem. Even so, it should work with all the pluguins because version 1.33 for xplane 11, works normally Log.txt Log_ATC.txt

I have configured the simulator to work full screen, with the native resolution of the monitor 2560x1440 I don't see how to do what you tell me. That has worked. Although when the preferences dialog box is invoked again, it remains at the top of the screen. In any case, moving it by clicking on one side is worth as a solution, while that patch arrives. Thank you all.

The top of the preferences dialog box is hidden at the top of the screen, making it impossible to close it. Is there a way to close it?

Thanks

These are the commands that are assigned. The commands indicated in the html manual can not be found in the keyboard configuration, anywhere: sim/engines // throttle_up (F2 key by default) sim/engines // throttle_down (F1 key by default) sim/engines // prop_up (F4 key by default) sim/engines // prop_down (F3 key by default) xscenery/mu2b60 // lift_condition_levers xscenery/mu2b60 // condition_levers_to_EMERSTOP xscenery/mu2b60 // toggle_emer_stop xscenery/mu2b60 // condition_levers_to_TAXI xscenery/mu2b60/toggle_both_emergency_stop // toggles both levers between EMER and TAXI xscenery/mu2b60/both_condition_levers_to_EMERSTOP // commands both levers to the EMER STOP position xscenery/mu2b60/both_condition_lever_to_TAXI // commands both levers from EMER back to TAXI What is Throttle 5? I don't understand what you're saying. Could you explain it in more detail please?

I can't move it with F1 or F2, or with the joystick controller. With the mouse does not work either With the rest of the aircraft it works normally.

OK

Una duda. Con el avión en fase de crucero, las temperaturas de los gases de salida ¿pueden superar los 650º? El manual explica que durante el arranque no se deben superar esta temperatura a riesgo de perder el motor. Veo que el indicador EGT tiene una marcar roja en los 650º, pero lo que no se es si está para indicar el límite durante la fase de arranque de los motores o es un límite para todas las fases del vuelo. Otra más en la imagen de abajo tengo configurada una altitud de 20000 pies, Como se ve ALTSEL está activo y el piloto automático también, sin embargo el altímetro marca 29000 ¿? No creo que sea un error de calibración porque la diferencia es muy grande. Unas veces indica 29000 y otras 20000.

Thanks Goran

But it is that I do not understand it, indeed that I do not understand it. No other plane gives me problems. I could not be the joystick. In addition I use Flight Simulator X, Cliffs Of Dover, IL2-1946, A10-DCS, with none of them I have problems in joystick. Cannot it be another thing? Thank you for your interest Goran.

Sorry, I do not know what happens to x-plane but SHIFT + SPACE command produces no screenshots with joystick configuration. I leave in place the video and the contents of "X-Plane Calibration.prf" It's all I can do. Content "X-Plane Calibration.prf" I 10 version _PFC_axis_min0 64.000000 _PFC_axis_min1 64.000000 _PFC_axis_min2 64.000000 _PFC_axis_min3 64.000000 _PFC_axis_min4 64.000000 _PFC_axis_min5 64.000000 _PFC_axis_min6 64.000000 _PFC_axis_min7 64.000000 _PFC_axis_min8 64.000000 _PFC_axis_min9 64.000000 _PFC_axis_min10 64.000000 _PFC_axis_min11 64.000000 _PFC_axis_min12 64.000000 _PFC_axis_min13 64.000000 _PFC_axis_min14 64.000000 _PFC_axis_min15 64.000000 _PFC_axis_cen0 64.000000 _PFC_axis_cen1 64.000000 _PFC_axis_cen2 64.000000 _PFC_axis_cen3 64.000000 _PFC_axis_cen4 64.000000 _PFC_axis_cen5 64.000000 _PFC_axis_cen6 64.000000 _PFC_axis_cen7 64.000000 _PFC_axis_cen8 64.000000 _PFC_axis_cen9 64.000000 _PFC_axis_cen10 64.000000 _PFC_axis_cen11 64.000000 _PFC_axis_cen12 64.000000 _PFC_axis_cen13 64.000000 _PFC_axis_cen14 64.000000 _PFC_axis_cen15 64.000000 _PFC_axis_max0 64.000000 _PFC_axis_max1 64.000000 _PFC_axis_max2 64.000000 _PFC_axis_max3 64.000000 _PFC_axis_max4 64.000000 _PFC_axis_max5 64.000000 _PFC_axis_max6 64.000000 _PFC_axis_max7 64.000000 _PFC_axis_max8 64.000000 _PFC_axis_max9 64.000000 _PFC_axis_max10 64.000000 _PFC_axis_max11 64.000000 _PFC_axis_max12 64.000000 _PFC_axis_max13 64.000000 _PFC_axis_max14 64.000000 _PFC_axis_max15 64.000000 Edit: I could finally make screenshots with joystick configuration

I see that I'll have to settle for a plane that partially works. I at least I have that problem with other aircraft of payment, free or having the simulator itself. The first video shows without doubt that the problem exists, and that problem, again, other aircraft do not.

I bring a fact if it helps: When tuned to a frequency VOR and NAV mode is enabled, the aircraft is fully stabilized fly.

I use a CH Products Fighterstick. With the rest of airplanes I have no problem.

No, I have reduced speed but the problem remains the same

Hello: Today I bought this aircraft in X-Aviation. But I have a problem. The aircraft has an excessive rolling, with AP and YD assets. I use X-Plane 10.11