pijak

This we already discussed before, they are turned off ! Must be Scenery ... or Dragons.

Yes and in the beginning I thought it´s a Jetstream problem, but for sure its not. I did several flights in other parts of Germany (real weather download switched on) and everything went fine. Must have something to do with scenery in this area.

Hello cessna729, I though already, its like flying against a wall ... I though it might be some invisible mountain, some error in scenery creation. So it can not be connected to the kind of airplane or the handling of the plane. Anyway as requested I attached the files to this post. jetstream_flightpath.zip METARrwx.zip

Ok thanks so far. If somehow I find out what causes this strange behaviour I´ll post it here ... until then I´ll only do short traffic circuits with your plane Thanks for help everybody .

@horani: the MTBF is off @Javier: It´s not exactly FL100 but never below. I guess it is connected to time. I tried again a testflight with clear weather, no download, no failures and I set 2 solutions per frame. What can i tell you - the same happens. Well, not exactly the same, this time first the panel dissapears, then after 10 seconds the plane jumps and fire alarm is activated. Maybe it´s my graphics card ? Nvidia GF GTX560. But I didn´t change it, its still the same... . I did a testflight with default KingAir ... nothing happend. I´m still wondering about this entry in my log file: Loaded: E:\X-Plane 10/Aircraft/X-Aviation/BAe Jetstream 32/plugins/systems/64/win.xpl. Clean exit from threads. 0:13:01.981 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.dds' 0:13:01.981 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.png' 0:13:01.981 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.bmp' 0:13:01.981 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.dds' 0:13:01.981 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.png' 0:13:01.981 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.bmp' Could this be a reason for loosing the panel after few minutes of flight ?

Hello cessna729, i reinstalled the whole x-plane, only installed the Jetstream to be sure no other aircraft plugin causes the malfunction. Then I tried the same flight again in 64bit and again passing FL100 right engine on fire. All engine instruments well below red lines. CAVOK Conditions. Ok, then I tried 32bit. The flight goes well for 30 min, then the same - fire on right engine. I keeped all within the limits and out of nothing the plane jumps again. If I overheat the engine, it should burn within a few minutes according the manual, not after 30minutes. I attached a video, which is unfortunately bad quality, but you can get an idea of what I mean. Please see the weather radar switched on, without red clouds, without any clouds. Jetstream32_1.mov

Hello Javier, Bad managed engines? Actually I always keep RPM, EGT, Torque well below the red line, no amber lights are illuminated. Oil cooler flaps are open. Version 1.03 was working well on my computer with XP 32bit. Thats why I posted. I´m aware that overheating the engine will cause damages. Whats strange is the jumping of the plane before the engine catches fire. So the fire must be a result of the jumping, caused by ... ? Not by the weather And why does the panel disappear ? Maybe something to do with that ? : Loaded: E:\X-Plane 10/Aircraft/X-Aviation/BAe Jetstream 32/plugins/systems/64/win.xpl. Clean exit from threads. 0:02:16.839 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.dds' 0:02:16.839 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.png' 0:02:16.839 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.bmp' 0:02:16.839 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.dds' 0:02:16.839 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.png' 0:02:16.839 I/SCN: Failed to find resource 'Panel.png' (parent = 'Aircraft/X-Aviation/BAe Jetstream 32/' at 'Aircraft/X-Aviation/BAe Jetstream 32/Panel.bmp' I bought your plane a few month ago and everything went fine until 64bit ... regards, sebastian

Thanks for fast reply. I did the same flight just with CAVOK and the same happens. When passing FL100 I switch off seatbelts and landing lights, just a few seconds later fire on engine No1. The route I intend to fly is LSZA-LOWI routing like: ORI L615 OSKOR M985 SUMIR M726 BRENO. Please see the pictures for engine and weather settings. As you can see No2 RPM is well below 100%, I always reduce RPM just after takeoff to 95-97%.

Hello, I run XP10.20 64bit on a WIN7 64bit PC. After around 5-10 minutes of flight, the plane suddenly jumps like in very heavy winds, then left engine catches fire. Few seconds later the main panel just disappears. I already reinstalled the plane and did several testflights, all with same results. Engine instruments are within the limits, nothing above red line. Attached pls find the x-plane log file. Maybe somebody has an idea ? -sebastian- Log.txt