centerforcekid

Does anyone know how to get the PFC C2 Console to work with the TBM? It works fine with the IXEG 737 and others? When you open up the TBM900 it goes immediately to ON FIRE! So, I'm assuming that fuel flow somehow is always ... on.

So.. I have a flight plan loaded and flying in cruise. ATC gives me a short cut to one of the other waypoints in the flight plan. How to I get the FMC to go to the next 'direct to' waypoint and/or next 'leg'. I tried pressing the button next to the waypoint i want to goto, but there does not seem to be a 'direct to' button or lighted 'execute' ... Help please! Patrick

Hi Jan, well, i figured it out. After months of screwing around i found i had the ‘Carb Heat’ turned on for the right engine. Guess what, when i turned it off, the engine came to life! Take care, great product and lots of fun to fly! Patrick.

Hi Jan, Thank you for the quick response! i'll take a peak when I get home tonight. I'll go thru the button setups tonight. I'll let you know what happens, I've also asked the folks over at PFC to see if they see the problem elsewhere. thanks again! Patrick

Hello, I have the 737 set to 'running' at start but when I have the PFC plugin loaded the number 2 engine spools down. It appears that the fuel flow goes to zero, like if i shut off the fuel control by the throttles. the PFC plugin works fine with the X-plane 737,747 and King Air. So, i'm a bit lost as to why its doing it on the IXEG 737. Also, (minor) the spoiler control does not work on the IXEG and it does work with the X-plane models. Any help would be appreciated. I have the latest plugin from PRC also. Patrick

I have to assume I'm somehow missing a step. It works fine if I start with the engines running. So that is what i will do. tonight, i'll try just gong thru the checklist instead of the tutorial. I'm obviously doing something wrong.... thanks anyway! Pat.

Hello all. Yes FD is engaged. i know the yaw dampners and FD, hdg bug need to be engaged. are there any other 'gotchas' that need to be active? it's weird because it works fine if I start with the 'engines running'. It's like i'm missing a step in the process for the 'cold dark startup in the tutorial'. and Philipp i have been flying it since i got V1.1 a month or so ago and could never get the AP to work from a cold start up. thanks to you all however, it's nice to have input. Pat.

Hello. I have a problem engaging the autopilot. If i start with the engines running, autopilot works fine. But if i start per the tutorial, i cannot get the autopilot to engage... AND YES the yaw dampeners are engaged (lights out). Is there a certain sequence of button presses that i need to be aware of? By the way ... the CRJ200 is BY FAR the best plane I have in X-plane. Any thought of doing a 737???? thanks! Pat.