DContreras
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Latest X-Plane & Community News
Events
Downloads
Store
Posts posted by DContreras
-
-
Any update on the general release date for 1.1?
-
On 8/9/2020 at 8:29 PM, Coop said:
We are looking into the engine cutoff bug at near-idle power when taxiing, there seems to be something in the physics model that needs a bit more tuning.
Any update on the fix? My plane is stopping on the runway at low speeds and idle.
-
On 8/6/2020 at 7:49 PM, Attitude said:
Visually inspect the ailerons outside to confirm you are centered. The side stick system is has been fixed on my end and will be in the next update.
Awesome! Thank you for the response.
- 1
-
Just now, wired521 said:
I've noticed this as well,
In the interim, there is an aileron trim reset control you can bind (default is 9 I believe). I've been using that as a work around for the time being.
Thank you for the information. I will give it a shot.
-
This is the video where the aileron trim not working was mentioned:
-
I have uploaded version 1.01. The aileron trim on the stick works, but does not animate on the control stick and there is no corresponding noise for it. Without this, it is practically impossible to assess whether the trim is properly centered during run-up. Found this out the hard way when the plane banked hard to the right after take-off. On the external camera view, I can see the trim move, but to get it lined up properly is extremely difficult and impossible during flight. Without the animation, you cannot test the AP in the preflight phase. I saw another video on one of these threads and the person commented about the trim not showing on the original release.
AFM M20R Ovation II CHT and Oil Temp High
in AFM M20 Collection
Posted
I have been flying the Ovation 3. I am not using the experimental flight model, but my oil temps and CHTs are super high and not controllable. Whether I lean per the AFM or run full rich, the oil temps are pegged in the red and the CHTs are in the 500s. I have looked at every page and followed the checklist and I am still having issues. What can be done?