Jump to content

Chimo

Members
 View Profile  See their activity

  • Posts

    6

  • Joined

  • Last visited

 Content Type 

Posts posted by Chimo

  2. FMC goes acrobatics

    in 737-300 Aircraft Systems and Operation

    Posted

    I made a flight from EDDW to EGSS. STAR at EGSS is ABBOT1C. ILS Approach 04. The left side of the attached picture shows the approach chart, on the right side you see the approach in the FMC! Seems, that the FMC want to show, how to fly an acrobatic challenge with the IXEG 733:) (used Navigraph Data cycle 5/2016)

    Chimo

    ILSApp04.jpg

  3. Tutorials

    in General Discussion

    Posted

    It´s time to give a big compliment for Jan´s PDF and Video tutorials which comes with this plane. After my first spontaneous flights, I flew the Tutorials step by step and learned in every flight more and more about the "hidden" features of this plane and the spirit of flying the classic B737. Forget the FMC and the LNAV-VNAV-Autoland flights. I think, it was much time invested in these tutorials but I hope, there comes more. Danke Jan.

    Chimo

    • Upvote 5

  4. AIRAC File

    in General Discussion

    Posted

    Folks, as stated, Aerosoft supports essentially all formats as far as I can tell. This may ultimately mean you stop subscribing to one and move to the other. Their supported list includes: 

    • Aerosoft Airbus A318 / A319 
    • Aerosoft AirbusX Extended/Standard (FSX; Prepar3D) 
    • FlightSim Commander (FSX; Prepar3D) 
    • FS Navigator (FS2004) 
    • aeroSystem 737 Avionics 
    • AivlaSoft Electronic Flight Bag (FSX/Prepa3d v2) 
    • CaptainSim 757/767 (FSX; Prepar3D; FS2004) 
    • Digital Aviation Piper Cheyenne (FSX; Prepar3D; FS2004) 
    • Eurowings Professional (FS2004) 
    • EADT KLN 90B (X-Plane) 
    • Eaglesoft Cessna Citation (FSX; Prepar3D; FS2004) 
    • Flight1 ATR 72, BN2-Islander, C182T, Fokker, Mustang, Super 80 Professional (FSX; Prepar3D; FS2004) 
    • FSBuild 2.4 
    • FsXPand - Flyware (FSX; Prepar3D; FS2004) 
    • iFly Boeing 737 (FSX; Prepar3D; FS2004) 
    • Integrated Simavionics (FSX; Prepar3D; FS2004) 
    • JRollon Planes CRJ200 (X-Plane) 
    • Level-D 767 (FSX; Prepar3D; FS2004) 
    • Majestic Dash 8 Q400 (FSX/Prepa3d/Prepa3d v2) 
    • PMDG alle Produkte (FSX; Prepar3D; FS2004) 
    • Pointsoft PRO-ATC/X 
    • Prosim 737 
    • PSS Boeing 777; A330; A340 (FS2004) 
    • QualityWings 757 (FSX; Prepar3D; FS2004) 
    • QualityWings Jumbolino (FSX; Prepar3D; FS2004) 
    • Sim-Avionics Flightdeck Avionics 
    • TuneVNAV Descent Pro3 
    • vasFMC 
    • X-FMC (X-Plane) 
    • Wilco/Feelthere 737/777 Airbus, Citation X, Embraer E-Jets v.2, Legacy (FSX; Prepar3D; FS2004) 
    • Ideal Flight 10 
    • 777 Worldliner Professional/Extended (X-Plane) 
    • Boeing 757 Professional (X-Plane) 
    • JARDesign A320neo (X-Plane) 
    • JeeHellWare 
    • FJCC Universal FMC (X-Plane) 
    • SSG B748-i 
    • Global ATC 
    • Simcheck A300 FMC (FSX) 
    • EFASS - Electronic Flight Assistant   
    • Professional Flight Planner X 
    • X-Plane 10 (V 10.00 - 10.xx) 
    • GNS430 (X-Plane 10.30) 
    • SimLauncherX

     @mgeiss the format is already a mix of two existing formats. Navigraph still does not work at this time.

    AirTrack for Ipad is not supportet :(, one of my reasons to use Navigraph

    Chimo

  5. [IN PROGRESS] A few 1.03 questions/issues

    in British Aerospace Jetstream 32

    Posted

    OK, I have read the whole Woweezowee story from the sidelines with avid interest as I have been suffering the exact same fate.  V. 1.01 of the aircraft worked a treat for me but from the start of v. 1.03 every time I load up the JS32 I get a double assignation of throttle.

     

    I have a simple XP setup, I am on XP9 with Mac OSX and a Saitek X52 throttle and joystick, and have followed the aircraft's manual to the letter.  I have tried the various advice shown in this thread without any joy.  I have loaded up the aircraft with engines running as well as cold and dark with the same result.  I have even tried loading it into a demo version of XP10, again with exactly the same situation.

     

    This is my joystick config for the default King Air 200:

     

    attachicon.gifScreen 1.jpg

     

    The moment I load up the JS32 it switches to the following:

     

    attachicon.gifScreen 2.jpg

     

    What was the reverse thrust is now doubly assigned as the throttle.  As a result I cannot adjust the throttle of the aircraft using the X52 throttle (but I can by moving the reverse thrust lever!).

     

    When I close out the JS32 by loading another aircraft (i.e. the default King Air) the faulty double assignation remains and I have to recalibrate my joystick settings - not an arduous task, but frustrating.

     

    I have tried unplugging and replugging the joystick and even deleting the XP preferences folder but the problem remains.

     

    At present the only way I can fly the aircraft is to activate (turn green) the JS32‘s Joystick Assign option on the control stick menu, reset the assignations in Settings/Joystick, Keys & Equipment menu and leave the JS32‘s Joystick Assign option green whilst I fly (if I change it back to orange the problem reoccurs).

     

    Not an elegant solution but it’s all that is available.  As I say, it worked perfectly well in v. 1.01 and my preferences haven’t changed since upgrading to v. 1.03.

     

    By the way, if I close the JS32 with the “corrected” joystick assignments and the Joystick Assign option green and load up another aircraft (e.g. the default King Air) I get the following result:

     

    attachicon.gifScreen 3.jpg

     

    A different double assignation of the throttle - this time on a "bar" that doesn't even correspond to any axis on my Saitek joystick.  Again I have to manually delete the double assignation to be able to fly that, or any other, aircraft.

     

    Also if I disconnect the Saitek joystick altogether, fire up XP and then load up the JS32, the Settings/Joystick, Keys & Equipment menu of XP still appears to “recognise" that there is a joystick connected and yet again applies a double assignation to the throttle as follows:

     

    attachicon.gifScreen 4.jpg

     

    In this condition, if I use the mouse to click on the throttle in the 3D cockpit it won't budge.  I again have to click on the Joystick Assign option and turn it green before it will work.

     

    I am therefore completely bemused by this.  I am also intrigued to know how Woweezowee managed to move the position of his 3rd party equipment axis assignations as this sounds as if it might be part of the problem.  XP automatically detects which Saitek axis movement is which “bar’ in the Joystick & Equipment menu and I cannot see how I can manually alter those settings.  I only have one joystick connected so cannot see how there might be a conflict.

     

    Grateful for any advice.

     

     

    Andy

    Same Setup as Andy: x-plane 9, Mac OSX, saitek x52 , and the exactly the same issues. The only way to get the last version of JS32 in the air is Andys work flow.( Before every Flight set the axes new and turn never the Assign Axes Option back to amber). It is such a nice plane, but I wish I had the previous version back.

     

    Chimo

×
×
  • Create New...