davidngr

A question out of sheer curiosity: if the reversers deploy automatically upon touchdown it means that landing was good?

It seems to be working now. Maybe I pushed the XFR button inadvertently yesterday as you said and that s the reason why I had this problem....

Thanx philiph for your quick reply! I will check it tomorrow and if the problem occurs again i will post some screenshot! I don t remember pressing the xfr button! Davide

I don't know what is going on but after a couple of touch and go's with my crj200, intercepting the localizer without any problems at all, I have experimented a strange issue: as soon as my aircraft intercepts the loc again and starts to turn to center the runway, it suddenly stops its turn and it goes off course: this occurred several times and I was not able to continue my descent to center the runway properly....? I don't know why but I have never experimented this issue before...any explanation?

When I heard about this project for the first time, I realized that it would be the best of all times. After purchasing several aircrafts, I said to myself"I will no longer buy an aircraft if all its systems are not fully simulated and its flight dynamics are not realistic...." To be honest I thought that this would never happen, but thanx to your team and your project this dream seems to come true. I have always felt that other aircrafts lacked something that would make them up to the mark. You re perfectly right when you say it is worthwhile waiting, because your project will be worth the wait:-)

Many thanx for your quick reply Philip and Javier! The only thing I wanted to know was whether it was a problem affecting only my aircraft or it was simply a bug! I know it is not a big deal and I can wait for a new release and keep on flying with 1.2 Sorry to bother you! I didn t mean that! Many thanx for all and thanx for your support! Davide

What we all are looking for is a FULLY SIMULATED AIRPLANE which exploits the great potentiality offered by x-plane in terms of realistic flight dynamics. As far as I can see your team is trying to make this happen for the first time! As I have said before, I will be proud and honoured to make a donation to you If this dream comes true:-) Take your time and make the most of it to do a superb job...

I will pay u twice as much if i have a plane like this, which simulates every button and switch! I don t mind! I will go for a donation as well! Striving for perfection is your motto! Great

Hi Javier I have installed again the Crj200 v1.2, and I have tested the aircraft both in Valencia and in Alicante, but this problem occurs again: VOR/ILS names are not displayed on PDF. All VOR frequencies are tuned to Manual mode. I have tried to see whether the same problem might occur in other aircrafts but VOR/ILS names are displayed properly. I have also chosen Alicante because there are two Vors. Default navigraph installed. So I don't know what it is due to. Hope to hear from you asap Here is my computer specification: Macbook pro 13 "Processore Intel Core 2 Duo 4GB di Memoria Disco rigido da 320GB1 SD card slot Processore grafico NVIDIA GeForce 320M. 256MB"

Ok I will check it again but if I am not wrong the same problem occurred even though I turned on MANUAL mode!! Let you know asap

....

I ve checked it out with other airplanes and it worked. Unfortunately I have the same issue with CRJ200 again today! Maybe is it due to the fact I have updated Navdata in Jrollonplanes folder?Ps I have attached a screenshot. I am in valencia. FMC is tuned on Valencia Vor Frequency but LVC is not displayed...

Ok I will check tomorrow. Maybe I have done something wrong without noticing it.

While doing a few flights this morning I have had the impression that VOR/ILS names were no longer displayed on PDF after selecting the correct frequency! I am in Valencia rwy 30 and NAV 1 is tuned on Valencia VOR FREQUENCY , but NAV SOURCe is not receiving any information! This is the first time I have had this issue. Am I doing something wrong? Am I missing something? Davide

Have u engaged the flight director by chance?

Many thanx

thanx PS Philips if you get time, please watch this youtube video: From 1:48 MIN ON! Will it be simulated?

Where may I find the FCOM?

Many thanx Philip: a question out of sheer curiosity: will we be able to set the altitude in the fmc as in the real one? Davide

Many Thanx Javier! How is it going with the FMC improvements? Davide

How can I Increase or decrease cabin/cockpit temperature?

Amazing! Amazing! Please One more video one more video!!

Ok the only thing to do now is to be patient and wait for the release of this breathtaking aircraft (December 2011). I don't think I will handle it. The wait is killing me......

Are flight instruments cleary visible? Or do you think that we will have pop-up screens like in the Crj200?

I can't wait I can't wait I can't wait I can't wait I can't wait I can't wait I can't wait I can't wait I can't wait I can't wait I can't wait I can't wait I can't