mattgamingphx
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Latest X-Plane & Community News
Calendar
Downloads
Store
Posts posted by mattgamingphx
-
-
Hi folks,
Flying out of Portland there was a beautiful fog layer as the weather depicted. However, about 1000ft after take-off that whole layer disappeared? Is this an X-Plane issue?
-
11 hours ago, Litjan said:
Hi, there could be several things causing this, so please check them off one by one:
- A very hot ambient temperature combined with high field elevation
- An inadvertantly set high TASS in the FMS
- Your joystick interfering with the virtual thrust levers during takeoff run - some people try to move their hardware throttle "along" with the advancing thrust levers - this will cause them to snap back to "manual control" when the plane passes 84kts (THR HOLD), and the throttle being now controlled by hardware throttle again. To avoid this, follow the recommended procedure: Click TOGA button, immediately advance joystick throttle to forward mechanical stop (full power!).
- A spikey joystick throttle that "regains" control of the virtual thrust levers by accident.
If all this fails, please post a video of a takeoff where this happens and we will go from there.
Cheers, Jan
Thanks for the reply! I think I've been doing the takeoff procedure wrong all of this time. I'd normally do 40% thrust, then hit TO/GA and was not putting the thrust levers to full power afterwards. I however haven't had the chance to test this out yet until later today. I'll report any issues, thanks again.
- 1
-
Hi,
When I'm taking off and place thrusts manually to 40% range, after activating TO/GA power my thrust only goes to 81%? This is causing me to have barely any power to get off the runway, is there something I'm doing wrong? Thanks.
Plane model turning blue
in Bug Reports
Posted
I am having an issue with the cockpit turning blue while panning the camera. I am using the latest version of X-Plane 11 and IXEG.