the_papy Posted January 6, 2013 Report Posted January 6, 2013 hello,I have to close the mode "track ir" to manually open the passenger door for working..its impossible with track ir on and free camera position. 2: how to assign RPM to hotas plz, sorry if ridiculous question Quote
the_papy Posted January 6, 2013 Author Report Posted January 6, 2013 (edited) the point 2. is SOLVED. Edited January 6, 2013 by the_papy Quote
Japo32 Posted January 6, 2013 Report Posted January 6, 2013 The RPM cannot be assigned to the Joystick as an axis. Is something that can break the programming of the plane. The use is made with the mouse and the pilot not have to change it during all flight. It has to be in "Flight" position all the time, and in "Taxi" during the ground part. About the trackir and camera position. With the arrow keys you can move the camera position. But I recomend you to use pilot view plugin. To open the cabin door you can use one of the options in the yoke menu. Better than go to the rear ot the cabin to activate the switch. Quote
cessna729 Posted January 6, 2013 Report Posted January 6, 2013 (edited) hello,I have to close the mode "track ir" to manually open the passenger door for working..its impossible with track ir on and free camera position.Hi thepapy, It depends how flexable your neck is :lol:From 3d cockpit view! or you could assign a button on a joystick for flightcontrols/canopy_toggle if you don't want to get a stiff neck like me trying to film that video :lol:cessna729. Edited January 6, 2013 by cessna729 Quote
the_papy Posted January 6, 2013 Author Report Posted January 6, 2013 (edited) Hi thepapy, It depends how flexable your neck is :lol:From 3d cockpit view! or you could assign a button on a joystick for flightcontrols/canopy_toggle if you don't want to get a stiff neck like me trying to film that video :lol:cessna729.nice thanks for you response th is ok for click with my neck ahah but not if i m externe of plane in free camera.. , sorry for my bad english, wthanks Rollon for you yoke menu, i view in manual ,wat is the command for move camera position with track ir , i m just only in cabine 3d , the arrow key dont work in 3d cabine.. sorry for my stupid question.. Edited January 6, 2013 by the_papy Quote
the_papy Posted January 7, 2013 Author Report Posted January 7, 2013 the solution is simple, its no possible to assign short cut for Desactived or activate Track ir in joystick.. :-( , or found any solution to move camera position with track ir.. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.