NWS Erratic & Not Working

[embraceentropy]

Now that my throttle issue is fixed...it led me to discover another issue that is keeping me from using the module on my first day of owning it.....

 

I noticed the steering tiller wobbling back and forth from max deflection to max deflection. When I start taxiing yaw input does not affect tiller virtual position nor the nose wheel position. If I tap a brake it turns the nose wheel to that side, but it doesn't return. When I stop, the nose wheel just wobbles back and forth again. Also, it reacts to the wind. I double checked my axes with no issue and even brought up the data from the inputs to check. I'm at a loss for words, here. 

 

I attached two videos using the xplane recorder along with my log.txt file. 

 

Full disclosure: I had this issue one time on the Rotate MD80, but only once. The tiller on my FJS 722 will swing like this at a stop with high winds, but goes away and performs normally when I start moving. 

Log.txt

[embraceentropy]

This was one was resolved for me thanks to DeshMindER on my throttle post (linked below). Apparently it is a bug with TM WH HOTAS default binding of the throttle pinky switch to NWS toggle. Remove this binding, restart, and it's all good.