AnonymousUser68 Posted September 20, 2010 Report Share Posted September 20, 2010 I was flying before and after takeoff I found a small problem. After rotation I tried to raise my gear and was successful but only with my rear gear. I tried lowering and raising the gear but the nose gear stayed in the down and locked position. I landed successfully so at least it stayed locked. In the end it doesn't really bother me because now I get to look at your extremely well modelled gear. This is what it looked like about midway through the flight!(Yes I a have waited for the gear to come up) Quote Link to comment Share on other sites More sharing options...
Japo32 Posted September 20, 2010 Report Share Posted September 20, 2010 ??? ??? But did you try again and it went up? I mean... after finishing your flight.. did you try to load again and test it?I have found several times on Mentor or other planes... that something is terribly bad... Don't know.. for example cannot manipulate radios... switches.. graphics are bad... or things like the gears.. or rudder that don't move... etc..Thanksfully that normally only happens to me once a month or what ever... and I found that closing x-plane and opening again fixed all problems.. and also just loading the plane again.The Landing Gear movement are all from datarefs.. if the dataref is bad because a bug of x-plane then all it can be done is reset the plane or x-plane.But imagine my face the first times I found this issue "BUT WHY IS ALL MESS UP.. NOW I WAS 20 HOURS EXPORTING EVERYTHING STEP BY STEP?????" hahahaha. Quote Link to comment Share on other sites More sharing options...
MdMax Posted September 20, 2010 Report Share Posted September 20, 2010 Hi Andrew !http://wiki.x-plane.com/Chapter_5:_X-Plane_Menus#Equipment_FailuresDid you uncheck the "mean time between failure" setting in your X-Plane menu ?Best regards and happy flying ! 8) Quote Link to comment Share on other sites More sharing options...
AnonymousUser68 Posted September 21, 2010 Author Report Share Posted September 21, 2010 Well that seems to have done the trick. I wouldn't file a support column before I had changed location and reloaded the aircraft but I forgot about restarting x-plane. Thanks for the help and keep up the great work.Andy??? ??? But did you try again and it went up? I mean... after finishing your flight.. did you try to load again and test it?I have found several times on Mentor or other planes... that something is terribly bad... Don't know.. for example cannot manipulate radios... switches.. graphics are bad... or things like the gears.. or rudder that don't move... etc..Thanksfully that normally only happens to me once a month or what ever... and I found that closing x-plane and opening again fixed all problems.. and also just loading the plane again.The Landing Gear movement are all from datarefs.. if the dataref is bad because a bug of x-plane then all it can be done is reset the plane or x-plane.But imagine my face the first times I found this issue "BUT WHY IS ALL MESS UP.. NOW I WAS 20 HOURS EXPORTING EVERYTHING STEP BY STEP?????" hahahaha. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.