Jojo38000 Posted May 7, 2016 Report Posted May 7, 2016 (edited) Hi guys, I was able to recreate a previously reported bug MCP Speed and VNAV are both engaged at the same time. Here is a picture below : You can clearly see that the AT is in MCP Speed mode, while the speed window is blank, and both Vnav and Speed buttons are green. Both LNAV and VNAV were engaged, and I then pressed the Speed button. And I ended up in this situation. No other buttons pressed in the meantime. Moving on to the second issue I encountered, regarding the Lnav tracing. Usually when I come across a "sharp turn issue", lowering the speed by adding a fake restriction usually works to get a smooth path again. It was not the case here, so maybe it can help you to figure out what's going on. I was approaching from the GARSA waypoint, didn't try the other one. Navigraph 1605 rev 1. . Also quick question regarding the calculated rwy center line : is it, as the FIX page, based on "magnetic headings" ? Which would explain the discrepency between the waypoints (MILAR especially) and the centerline, the variation reported on the chart being 18° east. Jonathan GizmoLog.txt Edited May 7, 2016 by Jojo38000 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.