Jump to content

Smartcopilot


birdy.dma

Recommended Posts

Yesterday after a while I could finally make my first flight and found some curiosities and mistakes.
With v1.4.2 and weather
If the PNF sets the FMC, in both PF and PNF dep, star and route appear correctly.
PNF can not activate AP
PF can not adjust flaps.
Yokes moved auto to the right by 3 degrees


You could put in the first thread identified problems and whether or not they are solved for the new we can learn and not repeat reports of known bugs.
Thank you for the effort and say this that you are done should be an obligation on any aircraft developed, enriches the simulation of a fully.
Thank you very much.

Edited by jatar
Link to comment
Share on other sites

1 hour ago, cmbaviator said:

Did another flight yesterday with the " with weather cfg file " from 1.4.2, and it worked pretty well, the wind data was perfect but it seems that the slave didn't have the same cloud position, we both have NOAA, SMP V3 and RWC.

Probably better with FSRGW, and depend of the settings of SMP, as they are probably différents.

Link to comment
Share on other sites

1 hour ago, jatar said:

Yesterday after a while I could finally make my first flight and found some curiosities and mistakes.
With v1.4.2 and weather
If the PNF sets the FMC, in both PF and PNF dep, star and route appear correctly.
PNF can not activate AP
PF can not adjust flaps.
Yokes moved auto to the right by 3 degrees


You could put in the first thread identified problems and whether or not they are solved for the new we can learn and not repeat reports of known bugs.
Thank you for the effort and say this that you are done should be an obligation on any aircraft developed, enriches the simulation of a fully.
Thank you very much.

Good idéa.. I can also join a read_me in the .zip. I just need a help, as my English is sometimes unclear. cmbaviator are you with me for o proper translation?

  • Upvote 1
Link to comment
Share on other sites

1.4.2 is not working for us. when we connect we get:

Update failed: Different datarefs. Check aircraft version.

 

1.0.5 does connect, but with alot of problems. no power on electricals on the slave side and two minutes of clicking sounds.

 

We do get it to work with FlyJsims aircraft. Any suggestions to get it to work?

2.05 version of Smartcopilot.

 

 

Link to comment
Share on other sites

Hi Birdie, like Solex version 1.0.5 connected fine for me but 1.4.2 is giving me an error " Update failed: Different datarefs. Check aircraft version. "

and checking the smartpilot2.log I found the following

"2016-04-06 17:22:31.209 WARN  Can't find DataRef: ixeg/733/altimeter/baro_inhg_copilot_0001_ind"

I am running Smartpilot v.2.05 

 

Edited by speckfire
Link to comment
Share on other sites

6 hours ago, Solex said:

1.4.2 is not working for us. when we connect we get:

Update failed: Different datarefs. Check aircraft version.

 

1.0.5 does connect, but with alot of problems. no power on electricals on the slave side and two minutes of clicking sounds.

 

We do get it to work with FlyJsims aircraft. Any suggestions to get it to work?

2.05 version of Smartcopilot.

 

 

 

6 hours ago, speckfire said:

Hi Birdie, like Solex version 1.0.5 connected fine for me but 1.4.2 is giving me an error " Update failed: Different datarefs. Check aircraft version. "

and checking the smartpilot2.log I found the following

"2016-04-06 17:22:31.209 WARN  Can't find DataRef: ixeg/733/altimeter/baro_inhg_copilot_0001_ind"

I am running Smartpilot v.2.05 

 

Update failed: there is something different between your sims : 1.0.4 vs 1.0.5, X Plane 10.36 vs X Plane 10.45, xjoymap.ini vs no xjoymap.ini, lua script, or something else creating commands or datarefs.

Can't find DataRef: this is only a warning in the log file

 

Waiting for a readme included in the .zip, here is a checklist:

Before the connection

Same state of the plane. fuel, payload, CG, Cold and dark, Turn Around, Ready to fly.

After the connection

If cold and dark, don't use the carts, APU only.

Elevator trim with joystick button only (no mouse).

Airbrakes with mouse, joystick button, keyboard (no axis).

Guards and gear door are not synchronized. Each pilot have to open/close them.

 

smartco 1.4.3.zip

  • Upvote 1
Link to comment
Share on other sites

Just wanted to share that I had a successful flight with another guy last night using the latest versions of the plane and SmartCopilot (1.4.2 and 2.05 respectively, I believe).

Had some issues, but went mostly okay. Sorry, can't remember the details.

Link to comment
Share on other sites

We (speckfire) both reinstalled X-plane and smartcopilot.

- Using smartcopilot 2.05B, version 1.4.3 of birdy's .cfg. and IXEG-737 1.0.5.

- I have X camera, Skymaxx 3.2 and Real Weather Connector. (all disabled)

No plugins installed, same fuel state, 2992 barometer, cold and dark, weather, location on the map and livery.

But we still get Update failed: Different datarefs. Check aircraft version.

What are we doing wrong?

2016-08-06 15:49:23.995 ERROR UPDATE FAULT - DR's are not equal
2016-08-06 15:49:59.588 INFO  Configuration file loaded
2016-08-06 15:49:59.588 INFO  Found: 1 CONTINUED integer DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 CONTINUED integer array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 30 CONTINUED float DataRef's
2016-08-06 15:49:59.588 INFO  Found: 15 CONTINUED float array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 CONTINUED string DataRef's
2016-08-06 15:49:59.588 INFO  Found: 1 SEND_BACK integer DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SEND_BACK integer array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 9 SEND_BACK float DataRef's
2016-08-06 15:49:59.588 INFO  Found: 6 SEND_BACK float array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SEND_BACK string DataRef's
2016-08-06 15:49:59.588 INFO  Found: 2 SLOW integer DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SLOW integer array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 4 SLOW float DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SLOW float array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SLOW string DataRef's
2016-08-06 15:49:59.590 INFO  Found: 554 TRIGGER integer DataRef's
2016-08-06 15:49:59.590 INFO  Found: 10 TRIGGER integer array DataRef's
2016-08-06 15:49:59.590 INFO  Found: 551 TRIGGER float DataRef's
2016-08-06 15:49:59.590 INFO  Found: 40 TRIGGER float array DataRef's
2016-08-06 15:49:59.590 INFO  Found: 0 TRIGGER string DataRef's
2016-08-06 15:49:59.590 INFO  Found: 0 CLICK DataRef's
2016-08-06 15:49:59.591 INFO  Found: 66 COMMANDS
2016-08-06 15:49:59.591 INFO  Found autopilot datarefs
2016-08-06 15:49:59.591 INFO  Found: 6 OVERRIDE DataRef's
2016-08-06 15:49:59.591 INFO  Connecting to - xx.xxx.160.243|56897

Edited by Solex
Link to comment
Share on other sites

The funny thing is when we select and share the default Baron via smartcopilot (which works fine) and then change planes to the IXEG737, we can connect ; but the cockpit is not 100% ie one pilot cannot see the flight director needles, auto throttle switches moving, or any autopilot selected lights.

We even disabled the firewalls, anti virus programs and opened the ports for smartcopilot. Are there any other ports that need to be considered?

 

Link to comment
Share on other sites

3 hours ago, Solex said:

We (speckfire) both reinstalled X-plane and smartcopilot.

- Using smartcopilot 2.05B, version 1.4.3 of birdy's .cfg. and IXEG-737 1.0.5.

- I have X camera, Skymaxx 3.2 and Real Weather Connector. (all disabled)

No plugins installed, same fuel state, 2992 barometer, cold and dark, weather, location on the map and livery.

But we still get Update failed: Different datarefs. Check aircraft version.

What are we doing wrong?

2016-08-06 15:49:23.995 ERROR UPDATE FAULT - DR's are not equal
2016-08-06 15:49:59.588 INFO  Configuration file loaded
2016-08-06 15:49:59.588 INFO  Found: 1 CONTINUED integer DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 CONTINUED integer array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 30 CONTINUED float DataRef's
2016-08-06 15:49:59.588 INFO  Found: 15 CONTINUED float array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 CONTINUED string DataRef's
2016-08-06 15:49:59.588 INFO  Found: 1 SEND_BACK integer DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SEND_BACK integer array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 9 SEND_BACK float DataRef's
2016-08-06 15:49:59.588 INFO  Found: 6 SEND_BACK float array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SEND_BACK string DataRef's
2016-08-06 15:49:59.588 INFO  Found: 2 SLOW integer DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SLOW integer array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 4 SLOW float DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SLOW float array DataRef's
2016-08-06 15:49:59.588 INFO  Found: 0 SLOW string DataRef's
2016-08-06 15:49:59.590 INFO  Found: 554 TRIGGER integer DataRef's
2016-08-06 15:49:59.590 INFO  Found: 10 TRIGGER integer array DataRef's
2016-08-06 15:49:59.590 INFO  Found: 551 TRIGGER float DataRef's
2016-08-06 15:49:59.590 INFO  Found: 40 TRIGGER float array DataRef's
2016-08-06 15:49:59.590 INFO  Found: 0 TRIGGER string DataRef's
2016-08-06 15:49:59.590 INFO  Found: 0 CLICK DataRef's
2016-08-06 15:49:59.591 INFO  Found: 66 COMMANDS
2016-08-06 15:49:59.591 INFO  Found autopilot datarefs
2016-08-06 15:49:59.591 INFO  Found: 6 OVERRIDE DataRef's
2016-08-06 15:49:59.591 INFO  Connecting to - xx.xxx.160.243|56897

 

3 hours ago, speckfire said:

The funny thing is when we select and share the default Baron via smartcopilot (which works fine) and then change planes to the IXEG737, we can connect ; but the cockpit is not 100% ie one pilot cannot see the flight director needles, auto throttle switches moving, or any autopilot selected lights.

We even disabled the firewalls, anti virus programs and opened the ports for smartcopilot. Are there any other ports that need to be considered?

 

 

Here is the problem: 2016-08-06 15:49:23.995 ERROR UPDATE FAULT - DR's are not equal

I am out of ideas.

Check your version of the plane, and of course the smartcopilot file. You must have the exact same file.

Smartco read the DataRefs.txt and the Commands.txt (In Ressources / Plugins). They should not be different, but, in case, delete them (back up), and launch the updater. It will recreate them with a fresh copy from Laminar. But, as the Baron is OK,, and nobody modify those files, there will be probably no difference.

2016-06-08_19h38_11.gif

Link to comment
Share on other sites

2 hours ago, jatar said:

With second flight, I did pause and I lost sync with my partner.
If any change to LVL change, he changes but the other do not. If I go back to VNAV the other continues in LVL CHANGE.
Thanks

 

Hi jatar,

If connection is lost (a quirk of internet), quickly pause both sims. Try to reorder you pits (fms, mcp etc), connect and leave the pause.

If you are lucky, you will land. If not, it will be a disaster movie.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...