Goran_M 1,504 Posted February 22 Report Share Posted February 22 1 hour ago, Cristi said: I didn't have problems with the engines before, temp. or torq., maybe I didn't notice this issues before. I don't know how you wouldn't notice these issues before. It was a major part of the update and the engines were severely affected by the new XP11 engine model before this update. 1 hour ago, Cristi said: Also I didn't change noting in the controller and is simply not working! The landing gear is new, and the next update will address the command for assigning a key press or button press to toggle it up or down. But for now, we ask that you use the mouse to click on the gear handle and drag it up or down. 1 hour ago, Cristi said: But to came with the plane with no throttle on landing, I think is the ultimate dream for an airliner :))... usually with the plane fully configure you have to apply some thrust, otherway the plane normally is falling from the sky!!! Perhaps your AoA is too low on landing. We've checked the new flight model against the charts, and the Saab pilots who helped us have checked this. We're comfortable with the way the flight model handles now. Link to post Share on other sites
Suprex 1 Posted February 22 Report Share Posted February 22 Hello, when I select NAVS R the knobs CRS1 and CRS2 they both only move CRS2. It's normal? Link to post Share on other sites
Cristi 0 Posted February 22 Report Share Posted February 22 Thanks for the clarifications. Many of the changes maided in this update I didn't notice, or bother me in the past!...and apparently they were a lots. One to another the plane is great, other way I wouldn't buy it! I will adopt the flight to the new changes. P.S. - I didn't want to make "snarky remarks" if it was an email address, were to send all this comments. But we don't have a choice and have to posted here on the forum! Regards, Link to post Share on other sites
Loek 0 Posted February 22 Report Share Posted February 22 Thank you for the update. However I don't get it installed (tried 3 times; also without any firewall/virus service active). Do you have any suggestion? Thank you! Link to post Share on other sites
Goran_M 1,504 Posted February 22 Report Share Posted February 22 32 minutes ago, Suprex said: when I select NAVS R the knobs CRS1 and CRS2 they both only move CRS2. We're looking into this. 30 minutes ago, Cristi said: Thanks for the clarifications. Many of the changes maided in this update I didn't notice, or bother me in the past!...and apparently they were a lots. One to another the plane is great, other way I wouldn't buy it! I will adopt the flight to the new changes. P.S. - I didn't want to make "snarky remarks" if it was an email address, were to send all this comments. But we don't have a choice and have to posted here on the forum! It's ok. We're still going through some teething problems, and an update will be issued very quickly. They are very small updates, and we won't make people wait any longer than they need to. 6 minutes ago, Loek said: Thank you for the update. However I don't get it installed (tried 3 times; also without any firewall/virus service active). Make sure Windows Defender also is not running. Cameron comes here regularly, and hopefully he will have a solution for you. Link to post Share on other sites
Loek 0 Posted February 22 Report Share Posted February 22 Goran, thanks. No WD running. 4th time try: No success. I hope Cameron will have a suggestion (or anybody else). Thanks again. Link to post Share on other sites
Goran_M 1,504 Posted February 22 Report Share Posted February 22 (edited) 1 hour ago, Loek said: Goran, thanks. No WD running. 4th time try: No success. I hope Cameron will have a suggestion (or anybody else). Thanks again. Wait. Is X-Plane running while you’re downloading? If it is, Gizmo cannot install. You need to shut down X-Plane. Edited February 22 by Goran_M Link to post Share on other sites
gasher9999 0 Posted February 22 Report Share Posted February 22 I, too, am having problems with V1.60. Can't bind flaps to Saitek throttle quadrant Lever #1 (worked in V1.5.1), can't bind AP/YD eng/disc to yoke toggle switches (worked in V 1.5.1), landing gear lever on switch panel not working, again, it did in v1.5.1. I guess I will have to wait for an update. I really enjoy flying this aircraft and have reverted to V1.5.1 for now. Link to post Share on other sites
BillyJB 1 Posted February 22 Report Share Posted February 22 13 hours ago, Cameron said: @BillyJB The error is caused by you upgrading to Mac OS X 64-bit only since your last install of the Saab. You can delete the Saab uninstaller file located in X-Plane/X-Aviation. That should solve it. Thank you Cameron. That did solve the problem. Link to post Share on other sites
BillyJB 1 Posted February 22 Report Share Posted February 22 (edited) On 2/21/2021 at 9:56 AM, TimNewst said: The S340A-osx-installer.app returns an error when attempting to uninstall the currently installed version on my Mac. Can you help please? TimNewst -Did you see Cameron's response to my similar problem? If you updated to Catalina or Big Sur. The Uninstall S340 program in the X-Plane/X-Aviation folder has to be deleted. I also deleted the S340 from my Aircraft/X-Aviation folder and the Gizmo file from the resources/plugins folder first. Edited February 22 by BillyJB Member name ommitted Link to post Share on other sites
Loek 0 Posted February 22 Report Share Posted February 22 Goran, Thanks again, but no, X-Plane was not running. By the way: the installation became not responsive at exactly the same file extraction position. Maybe that provides a clue. Link to post Share on other sites
campia608 0 Posted February 22 Report Share Posted February 22 Hi, Is the Captain Altimeter not meant to move. I have the number display moving but the hand that shows hundreds of feed is not moving, is this normal? Thanks Link to post Share on other sites
Cameron 3,175 Posted February 22 Author Report Share Posted February 22 13 minutes ago, campia608 said: Hi, Is the Captain Altimeter not meant to move. I have the number display moving but the hand that shows hundreds of feed is not moving, is this normal? Thanks Known issue, being worked on. 1 Link to post Share on other sites
Alphonso 8 Posted February 22 Report Share Posted February 22 I seem to be having problems starting the right engine. When I first start the left engine and then try to start the right nothing happens. I have tried to start the right first but still the same result. The auto start works OK. I have been following the start procedures closely thinking I may have missed something but can't see where I have. During a couple of test flights if I disengage & then re-engage the AP the Alert signal will not stop even if it re-engages. I have to ignore it and turn down the sound slider. I have re-installed the program in the event something was amiss but still had the same results. Any ideas? Link to post Share on other sites
campia608 0 Posted February 22 Report Share Posted February 22 Try clicking the ap disconnect button on the stick to cancel alarm before engaging it again. As for starting make sure the condition lever is at the start with the 2D display Link to post Share on other sites
Alphonso 8 Posted February 22 Report Share Posted February 22 I will try that with the cancel button. I have made sure the condition lever was in start but still won't start. Link to post Share on other sites
Goran_M 1,504 Posted February 23 Report Share Posted February 23 10 minutes ago, Alphonso said: I have made sure the condition lever was in start but still won't start. We're looking into why this is working for the left engine but not the right engine. For now, we ask that you push the condition lever into the detent by using the mouse manipulator (just left click and push it in). This will start the engine. Link to post Share on other sites
Alphonso 8 Posted February 23 Report Share Posted February 23 Thanks, it worked but took a bit of practice to find the sweet spot At least I can power up without taking the lazy auto-start way. Link to post Share on other sites
Cam 4 Posted February 23 Report Share Posted February 23 How is everybody steering on the ground. Nothing works for me - not the mouse, pedals differential braking or anything that works on v1.5.1. I had the tiller selected. Link to post Share on other sites
Goran_M 1,504 Posted February 23 Report Share Posted February 23 2 minutes ago, Cam said: How is everybody steering on the ground. Nothing works for me - not the mouse, pedals differential braking or anything that works on v1.5.1. I had the tiller selected. Link to post Share on other sites
Cam 4 Posted February 23 Report Share Posted February 23 53 minutes ago, Goran_M said: Thanks so much. After jiggling with the checkbox I got both the joystick Andy rudder pedals to work. Cheers. Link to post Share on other sites
Suprex 1 Posted February 23 Report Share Posted February 23 Hello, sorry, i have difficulty with english language. Maybe you already know: I don't see the indicator To/From in HSI of the first officier. Link to post Share on other sites
Babbo 0 Posted February 23 Report Share Posted February 23 Thanks a lot for your update! ... and a question: condition levers now can be mapped to keys? Link to post Share on other sites
JGregory 268 Posted February 23 Report Share Posted February 23 3 hours ago, Babbo said: Thanks a lot for your update! ... and a question: condition levers now can be mapped to keys? If you map the condition levers to "PROP" then the default keys for prop adjust will work. Link to post Share on other sites
JGregory 268 Posted February 23 Report Share Posted February 23 3 hours ago, Suprex said: Hello, sorry, i have difficulty with english language. Maybe you already know: I don't see the indicator To/From in HSI of the first officier. Will look into this. Link to post Share on other sites
Recommended Posts