Jump to content

The plane is out of control


Kestrel35
 Share

Recommended Posts

This is something on your end.  Almost definitely something to do with your control calibration or the CG being incorrectly set due to the loadout.  We've also seen FSEconomy screw things up when it loads the TBM with too much weight.  Double check everything and test again.  

 

Link to comment
Share on other sites

The maintenance manager is a different tab.  It allows you to make repairs to individual components of the aircraft.  You're also adding way too much power on the take off roll.  You will almost definitely damage something in the engine if you continue doing this.

Edited by Goran_M
Link to comment
Share on other sites

23 hours ago, Kestrel35 said:

With my throttle at 20-100%, the plane would continue to climb until it stalled out of control and would roll to the left. Is there a solution?
Name of product: TBM 900

The solution, based on your video, is to takeoff with proper power settings, flaps in the takeoff position, rudder trim in the green band, and retract the flaps after establishing the climb. 

Nothing you’ve shown is particularly “out of control” - the TBM is a powerful light aircraft and it requires you to manage elevator and rudder during takeoff to prevent the roll you showed us.

Unrelated, it also appears from your video that the cabin is not pressurizing but the bleed air is on - meaning you may have a ruptured pressure vessel (you’d see this in the maintenance window). If you struck the tail on the ground at any point, that’d be the cause. 

pim_tbm900__e1r2.pdf

Link to comment
Share on other sites

21 minutes ago, rjb4000 said:

The solution, based on your video, is to takeoff with proper power settings, flaps in the takeoff position, rudder trim in the green band, and retract the flaps after establishing the climb. 

Nothing you’ve shown is particularly “out of control” - the TBM is a powerful light aircraft and it requires you to manage elevator and rudder during takeoff to prevent the roll you showed us.

Unrelated, it also appears from your video that the cabin is not pressurizing but the bleed air is on - meaning you may have a ruptured pressure vessel (you’d see this in the maintenance window). If you struck the tail on the ground at any point, that’d be the cause. 

pim_tbm900__e1r2.pdf 6.81 MB · 0 downloads

Which means he almost definitely broke the trim linkages, resulting in an even more exaggerated climb.  @Kestrel35 You need to fly this add on like it's the real aircraft.  It is highly complex and highly realistic.  Time to create a new airframe, because once you rupture the pressure vessel, it cannot be repaired.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...