Jump to content
JC_YYZ

Loud, constant wind sound

Recommended Posts

I went to fly the TBM today and upon loading, there was an extremely loud sound (similar to a loud wind or fire sound). Muting all sounds in X-Plane (including turning off master volume via the XP sound panel) did not stop this sound, nor did re-loading the plane or creating a new airframe. The only time the sound stopped was when I loaded a new (different model) plane in the sim. This occurred when the plane was in its cold and dark state.

I tried uninstalling the plane and reinstalling it - still with the same issue.

When I uncheck the TBM plugin in the plugin menu, the sound stops. I have never had this happen before and the only thing that has changed is that I installed the latest IXEG 737 along with the Gizmo beta.

Does the TBM rely on the Gizmo plugin? A different version perhaps? Has anyone else experienced this?

Update: I have checked my log and I have thousands upon thousands of lines like this: (I have reinstalled the plane twice)

2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_low.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_inn.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV burn.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_inn.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn2.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV burn2.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_behind.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV burn_behind.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_start_inn.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_start_out.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV prop_300rpm.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV prop_300rpm.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV prop_300rpm.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV prop_1200rpm_LF.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV prop_1200rpm_LF.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV prop_1150rpm.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV prop_1150rpm.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV prop_2000_front.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV prop_2000_front.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV prop_2000rpm_side.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV prop_2000rpm_side.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV prop_2000rpm_inside.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV woosh.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV woosh.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV woosh_bass.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV woosh_bass.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV start_init_inside.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV start_wind.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV start_click_inside.wav, error 0xa003.
2020-06-30 17:03:20 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV start_click.wav, error 0xa003.

Edited by JC_YYZ
Additional Info

Share this post


Link to post
Share on other sites

This is definitely something unique to your system.  Try deleting the contents of your "state" folder, (Output/TBM900/state) and reload.  Post back if this fixes the problem.

Share this post


Link to post
Share on other sites

No luck with deleting the content of the state folder. The log file is 121,959 KB and full of lines like below:

2020-06-30 19:07:05 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_low.wav, error 0xa003.
2020-06-30 19:07:05 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_inn.wav, error 0xa003.
2020-06-30 19:07:05 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn.wav, error 0xa003.
2020-06-30 19:07:05 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV burn.wav, error 0xa003.
2020-06-30 19:07:05 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_inn.wav, error 0xa003.
2020-06-30 19:07:05 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn2.wav, error 0xa003.
2020-06-30 19:07:05 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV burn2.wav, error 0xa003.
2020-06-30 19:07:05 TBM900[wav.c:681]: Error performing alSourcef(0x100A) on WAV burn_behind.wav, error 0xa003.
2020-06-30 19:07:05 TBM900[wav.c:838]: Error performing alSourcef(0x1022) on WAV burn_behind.wav, error 0xa003

No other plane is causing this issue - and as soon as I deactivate the TBM plugin in the plugins menu (while the plane is loaded) the roaring sound stops.

I am wondering if I need to do a full reinstall of everything...? :(

Share this post


Link to post
Share on other sites

Try loading into the TBM and then immediately quitting. We need to get the full log. The file you sent is truncated. Also, ZIP compression will reduce the size by about a factor of 20x, making it far easier to ship. We need to see the start as the aircraft is loading in.

Share this post


Link to post
Share on other sites

Here you. Sorry about the leaving the last one unzipped.

Much smaller log file this time. Still the same extremely loud wind noise, and when I tried to quit after loading, the program hung. Hopefully the log gave you everything you need though.

Log.zip

Share this post


Link to post
Share on other sites

Ok, I can see even X-Plane's fmod is complaining about getting some garbage from the sound driver:

0:03:35.947 E/FMOD: C:/jenkins/design-triggered/source_code/app/X-Plane-f/../../engine/sound/soun_fmod.cpp(511): FMOD error 29 - Value passed in was a NaN, Inf or denormalized float.
0:03:35.947 E/FMOD: C:/jenkins/design-triggered/source_code/app/X-Plane-f/../../engine/sound/soun_fmod.cpp(511): FMOD error 29 - Value passed in was a NaN, Inf or denormalized float.

If I had to guess, something is *really* broken in your audio driver. While FMod might be able to catch the error early and somehow survive, I suspect our backend sound engine (OpenAL) isn't taking it so nicely and is being sent into a tailspin of some sort.

Here's what we can try to do to remedy the situation:

  1. Update or reinstall your audio drivers. It looks like you're running audio to your Rift S. Try seeing if a new driver update is available for that.
  2. Try switching audio output devices.
  3. Try removing any custom audio device settings (spatial audio, surround, EQ, etc.).

 

Share this post


Link to post
Share on other sites

So I actually unplugged the Rift S (and made sure the drivers were updated), removed and reinstalled my audio driver, and made sure that my sound setup hadn't changed. I still got the exact same issue.

I have added two new payware planes in the last week or so (and haven't flown the TBM in that time), so I am suspicious that something has changed my setup. I am tempted to wipe my install and start clean. It might get me in the air again.

Log (2).zip

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...