Jump to content

G5 integration issue


Tassierob
 Share

Recommended Posts

Just bought the G5 for this fantastic aircraft. Unfortunately I cannot get the display to show in the cockpit. If I assign keys to activate the pop outs they work perfectly and power up as expected. I downloaded the patch file as required and also updated the Islander to the latest version. Any ideas appreciated.

Many thanks

Link to comment
Share on other sites

58 minutes ago, airwar said:

I have G5 patch from 27.04.2020 9:41 and everything fine.

 

image.thumb.png.2003a4e6ffc0491f36eaecc729c4acf2.png

Can you please run through exactly how you installed yours. I have tried multiple times! Also did you have to confirm your XAviation account again after you started the Islander? Also are you using Vulcan?

Link to comment
Share on other sites

45 minutes ago, Tassierob said:

Can you please run through exactly how you installed yours. I have tried multiple times! Also did you have to confirm your XAviation account again after you started the Islander? Also are you using Vulcan?

Hi Tassierob!

1. Download and Unzipp Islander_G5 file from 27.04.2020.

2.Put G5 folder to the BN-2 Islander plugins folder. Not to the X-Plane Resources/plugins folder!!!

3.Add to to the BN-2 Islander folder BN-2B Islander G5.acf file.

4. End

Edited by airwar
  • Upvote 1
Link to comment
Share on other sites

27 minutes ago, airwar said:

Hi Tassierob!

1. Download and Unzipp Islander_G5 file from 27.04.2020.

2.Put G5 folder to the BN-2 Islander plugins folder. Not to the X-Plane Resources/plugins folder!!!

3.Add to to the BN-2 Islander folder BN-2B Islander G5.acf file.

4. End

When you put the G5 plugin in did you delete the one that the installer put in when  G5 is initially installed in XP and you run the installer file in XP to link the G5 to the Islander? I am running out of ideas as I so far have it installed exactly as you did . Thanks

Link to comment
Share on other sites

1 minute ago, Tassierob said:

When you put the G5 plugin in did you delete the one that the installer put in when  G5 is initially installed in XP and you run the installer file in XP to link the G5 to the Islander? I am running out of ideas as I so far have it installed exactly as you did . Thanks

1. I delete the old G5 folder and simply put the new one.

2. I did not run G5 Installer.

3. I made BN-2 Islander 1.0.1 new activation.

4. I use Vulcan and Experimental Flight model.

 

  • Like 1
Link to comment
Share on other sites

1 minute ago, airwar said:

1. I delete the old G5 folder and simply put the new one.

2. I did not run G5 Installer.

3. I made BN-2 Islander 1.0.1 new activation.

4. I use Vulcan and Experimental Flight model.

 

Thanks...it maybe that I should not have run the installer. I will do a clean install of the plane and G5 tomorrow and see what happens.

many thanks, your help is greatly appreciated. 

  • Like 1
Link to comment
Share on other sites

29 minutes ago, StuckInOrbit said:

I have the same issue as @Tassierob and have done the steps outlined by @airwar multiple times, without luck.

I did download the patch from here.

As stated by @Tassierob, you can toggle the G5 with a hotkey in the sim. You just cannot get the G5 to display in the cockpit.

Could you post an image of your G5 cockpit?

Link to comment
Share on other sites

Ah, gotcha! I missed that.

OK, so that definitely loads the G5 in the cockpit. However, the screens are black. Instead, the display of the G5 PFD shows up on the transponder (all cut up and glitched) and the display of the G5 DG/HSI shows up on the chronometer (just a very small portion of it appears).

Sounds like other people are having issues with the G5. A new thread was started by someone and it also looks like it was mentioned in the pinned 1.0.1 update thread.

BN-2B Islander G5 - 2020-04-27 14.06.19.png

BN-2B Islander G5 - 2020-04-27 14.06.24.png

Edited by StuckInOrbit
add screen snips
Link to comment
Share on other sites

20 minutes ago, airwar said:

You definitely have an OLD BN-2B Islander G5.acf  file.

tldr; It wasn't that (details below) but for simplicity sake I'll simply say, IT'S FIXED! Steps:

  1. Uninstalled Islander v1.0.1
  2. Made sure the entire aircraft folder was deleted
  3. Re-installed Islander v1.0.1
  4. Downloaded the AFM G5 Islander patch from here.
  5. Installed the patch per the instructions on their site.
  6. Started a new flight using the BN-2B-26 Islander G5
  7. Registered the aircraft
  8. Tested the G5. Looks great! See attached image.

@airwar THANK YOU for all your help! It is much appreciated.

details;

File structure prior to the above steps:

\X-Plane 11\Aircraft\X-Aviation\TorqueSim BN-2 Islander>dir /A:a *G5* 
04/27/2020  10:48         1,602,682 BN-2B Islander G5.acf
04/26/2020  14:27           134,582 BN-2B Islander G5_icon11.png
04/26/2020  14:27            10,380 BN-2B Islander G5_icon11_thumb.png
04/24/2020  18:43               385 BN-2B Islander G5_prefs.txt
04/26/2020  15:40         1,400,032 BN-2B Islander G5_prop.png

File structure after re-install:

\X-Plane 11\Aircraft\X-Aviation\TorqueSim BN-2 Islander>dir /A:a *G5*
04/26/2020  14:27           134,582 BN-2B Islander G5_icon11.png
04/26/2020  14:27            10,380 BN-2B Islander G5_icon11_thumb.png
04/24/2020  18:43               385 BN-2B Islander G5_prefs.txt
04/26/2020  15:40         1,400,032 BN-2B Islander G5_prop.png

File structure after installing AFM G5 Islander patch:

\X-Plane 11\Aircraft\X-Aviation\TorqueSim BN-2 Islander>dir /A:a *G5*
04/25/2020  19:48         1,602,682 BN-2B Islander G5.acf
04/26/2020  14:27           134,582 BN-2B Islander G5_icon11.png
04/26/2020  14:27            10,380 BN-2B Islander G5_icon11_thumb.png
04/24/2020  18:43               385 BN-2B Islander G5_prefs.txt
04/26/2020  15:40         1,400,032 BN-2B Islander G5_prop.png

 

BN-2B Islander G5 - 2020-04-27 2.58.56 PM.png

  • Like 2
Link to comment
Share on other sites

16 hours ago, airwar said:

1. I delete the old G5 folder and simply put the new one.

2. I did not run G5 Installer.

3. I made BN-2 Islander 1.0.1 new activation.

4. I use Vulcan and Experimental Flight model.

 

Just a big THANK YOU for all your help airwar...everything now works perfectly.

  • Like 1
Link to comment
Share on other sites

Guys, Great job on getting this fixed and a big shout out to Torquesim for an update not even a week later...so after loading up the non G5 model, I noticed the nightlighting is different and also the passenger signs work in this version but not the G5 model...It seems G5 model is version 1.0 not 1.0.1....

Edited by prattpt6
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...