pops Posted February 19, 2020 Report Share Posted February 19, 2020 I have gone through the tutorials, the quick start guide and have searched this forum for a fix. I have also un-installed and re-installed the plane. It still will not turn over. All covers and tie-downs are removed. Overhead panel: all switches off except ignition is on auto De-ice, a/c,: off P-brake: on Gear: down and Flaps: up MAN ORV: Full back Throttle: Cut off All breakers: in Static valves: pushed in Batteries 25V ATTEMPT START: Crash bar: up Set to Battery (but have also used the GPU and when doing so set it to GPU) Wait for screens to light and press for messages CAS Messages: per guide (ok) Turn fuel pump on Push start switch and get nothing!!! I need some help please. Quote Link to comment Share on other sites More sharing options...
RobW05 Posted February 19, 2020 Report Share Posted February 19, 2020 Did you turn the fuel selector to either left or right tank? Quote Link to comment Share on other sites More sharing options...
pops Posted February 19, 2020 Author Report Share Posted February 19, 2020 Yes, it is on the left tank. Quote Link to comment Share on other sites More sharing options...
RobW05 Posted February 19, 2020 Report Share Posted February 19, 2020 I guess you also checked the maintenance menu for any failures? And just to make sure, have you checked and turned off xplane default failures? If you're following the checklists closely I really can't think of anything else than a failure. Hmm wait, do you by chance have any script running or maybe a hardware binding which could prevent fuel to flow? It would be worth to try without any scripts and all hardware unplugged. If it's working then you know how to troubleshoot further. Quote Link to comment Share on other sites More sharing options...
pops Posted February 19, 2020 Author Report Share Posted February 19, 2020 Yes and purchased a new starter and fuel pump even though they were not shown as red. Yes, I have no default failures set in X-Plane. Not sure I understand your scripts statement, but I Chose to obtain a new air-frame and I was subsequently allowed to start the engine. Quote Link to comment Share on other sites More sharing options...
Mustang7370 Posted February 20, 2020 Report Share Posted February 20, 2020 I had the same issue once. I was pushing the starter switch the wrong way. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.