debug: 0.081: Firmware v15.12.22.1106 warng: 0.087: GUI Read Key Protection Applied. debug: 0.099: X-Plugins OBJ8 Loader v15.01.11 debug: 0.100: * gxt.refresh().. debug: 0.113: gxt: AutoLoading.. debug: 0.138: gxt.load: Console debug: 0.139: gxt.load: ToolTray debug: 0.140: gxt.load: HotFix debug: 0.141: gxt.load: Mute debug: 0.143: gxt.load: Preferences debug: 0.144: gxt.load: RebootButton debug: 0.145: gxt.load: MAXX_RWC debug: 0.146: gxt.load: XA_Activation debug: 0.150: gxt.load: Shell debug: 0.152: gxt: Completed AutoLoad. debug: 39.966: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 39.981: Firmware v15.12.22.1106 warng: 39.985: GUI Read Key Protection Applied. debug: 39.994: X-Plugins OBJ8 Loader v15.01.11 debug: 39.995: * gxt.refresh().. debug: 40.003: gxt: AutoLoading.. debug: 40.003: gxt.load: Console debug: 40.005: gxt.load: ToolTray debug: 40.006: gxt.load: HotFix debug: 40.006: gxt.load: Mute debug: 40.007: gxt.load: Preferences debug: 40.009: gxt.load: RebootButton debug: 40.010: gxt.load: MAXX_RWC debug: 40.010: gxt.load: XA_Activation debug: 40.020: gxt.load: Shell debug: 40.021: gxt: Completed AutoLoad. debug: 40.022: Script: OnKickStart debug: 40.040: Found scripts/init.lua.aes debug: 40.040: gizmo.dofile(init.lua.aes) debug: 40.058: gizmo.dofile(ixeg_manip_utils.lua.aes) debug: 40.075: gizmo.dofile(ixeg.733.utils.lua.aes) debug: 40.084: gizmo.dofile(xscenery_sounds.lua.aes) debug: 40.086: gizmo.dofile(ixeg.733.sounds.lua.aes) debug: 40.622: gizmo.dofile(ixeg.733.electrical.lua.aes) debug: 40.648: gizmo.dofile(ixeg.733.annunciators.lua.aes) debug: 40.665: gizmo.dofile(ixeg.733.lighting.lua.aes) debug: 40.670: gizmo.dofile(ixeg.733.common_datarefs.lua.aes) debug: 40.674: gizmo.dofile(ixeg.733.config.lua.aes) debug: 40.686: Loaded IXEG preferences. debug: 40.687: gizmo.dofile(ixeg.733.electrical.indicators.lua.aes) debug: 40.689: gizmo.dofile(ixeg.733.misc.lua.aes) debug: 40.844: gizmo.dofile(ixeg.733.masi.lua.aes) debug: 40.848: gizmo.dofile(ixeg.733.fm.fusecd.lua.aes) debug: 40.850: gizmo.dofile(ixeg.733.fm.thrust.lua.aes) debug: 40.851: gizmo.dofile(ixeg.733.eadi.datarefs.lua.aes) debug: 40.853: gizmo.dofile(ixeg.733.bleedair.variables.lua.aes) debug: 40.856: gizmo.dofile(ixeg.733.bleedair.logic.lua.aes) debug: 40.858: gizmo.dofile(ixeg.733.pressurization.logic.lua.aes) debug: 40.873: gizmo.dofile(ixeg.733.aircond.lua.aes) debug: 40.885: gizmo.dofile(ixeg.733.apu.lua.aes) debug: 40.886: gizmo.dofile(ixeg.733.irs.lua.aes) debug: 40.895: gizmo.dofile(ixeg.733.eadi.drawutils.lua.aes) debug: 40.896: gizmo.dofile(ixeg.733.eadi.main.lua.aes) debug: 40.913: gizmo.dofile(ixeg.733.eadi.misc.lua.aes) debug: 40.916: gizmo.dofile(ixeg.733.camera.main.lua.aes) debug: 40.917: gizmo.dofile(ixeg.733.camera.control.lua.aes) debug: 40.919: gizmo.dofile(ixeg.733.hydraulics.lua.aes) debug: 40.933: gizmo.dofile(ixeg.733.fm.flaps.lua.aes) debug: 40.935: gizmo.dofile(ixeg.733.altimeters.lua.aes) debug: 40.938: gizmo.dofile(ixeg.733.groundmodel.lua.aes) debug: 40.941: gizmo.dofile(ixeg.733.engine.starter.lua.aes) debug: 40.943: gizmo.dofile(ixeg.733.clocks.lua.aes) debug: 40.945: gizmo.dofile(ixeg.733.mcp.lua.aes) debug: 40.952: gizmo.dofile(ixeg.733.lcds.lua.aes) debug: 40.966: gizmo.dofile(ixeg.733.firewarning.lua.aes) debug: 40.972: gizmo.dofile(ixeg.733.fuel.lua.aes) debug: 40.977: gizmo.dofile(ixeg.733.ecam.main.lua.aes) debug: 40.987: gizmo.dofile(ixeg.733.gui.lua.aes) debug: 41.028: gizmo.dofile(ixeg.733.gui.preflight.lua.aes) debug: 41.029: gizmo.dofile(ixeg.733.gui.prefs.lua.aes) debug: 41.031: gizmo.dofile(ixeg.733.gui.failures.lua.aes) debug: 41.035: gizmo.dofile(ixeg.733.gui.views.lua.aes) debug: 41.037: gizmo.dofile(ixeg.733.windscreen_effects.lua.aes) debug: 41.038: gizmo.dofile(ixeg.733.antiice.lua.aes) debug: 41.043: gizmo.dofile(ixeg.733.gearhandle.lua.aes) debug: 41.046: gizmo.dofile(ixeg.733.radios.lua.aes) debug: 41.055: gizmo.dofile(ixeg.733.fmc.assets.lua.aes) debug: 41.073: gizmo.dofile(ixeg.733.fmc.gui.lua.aes) debug: 41.083: gizmo.dofile(ixeg.733.fmc.ident.lua.aes) debug: 41.105: gizmo.dofile(ixeg.733.fmc.pos_init.lua.aes) debug: 41.107: gizmo.dofile(ixeg.733.fmc.route.lua.aes) debug: 41.110: gizmo.dofile(ixeg.733.fmc.alt_dest.lua.aes) debug: 41.111: gizmo.dofile(ixeg.733.fmc.legs.lua.aes) debug: 41.113: gizmo.dofile(ixeg.733.fmc.hold.lua.aes) debug: 41.114: gizmo.dofile(ixeg.733.fmc.fix.lua.aes) debug: 41.116: gizmo.dofile(ixeg.733.fmc.prog.lua.aes) debug: 41.118: gizmo.dofile(ixeg.733.fmc.deparr.lua.aes) debug: 41.119: gizmo.dofile(ixeg.733.fmc.departures.lua.aes) debug: 41.121: gizmo.dofile(ixeg.733.fmc.arrivals.lua.aes) debug: 41.123: gizmo.dofile(ixeg.733.fmc.n1_limits.lua.aes) debug: 41.124: gizmo.dofile(ixeg.733.fmc.perf_init.lua.aes) debug: 41.126: gizmo.dofile(ixeg.733.fmc.takeoff.lua.aes) debug: 41.127: gizmo.dofile(ixeg.733.fmc.approach.lua.aes) debug: 41.129: gizmo.dofile(ixeg.733.fmc.vnav.lua.aes) debug: 41.132: gizmo.dofile(ixeg.733.fmc.climb.lua.aes) debug: 41.134: gizmo.dofile(ixeg.733.fmc.descent.lua.aes) debug: 41.136: gizmo.dofile(ixeg.733.fmc.cruise.lua.aes) debug: 41.138: gizmo.dofile(ixeg.733.fmc.menu.lua.aes) debug: 41.139: gizmo.dofile(ixeg.733.fmc.duplicates.lua.aes) debug: 41.141: gizmo.dofile(ixeg.733.fmc.prefs.lua.aes) debug: 41.142: gizmo.dofile(ixeg.733.autopilot.lua.aes) debug: 41.183: gizmo.dofile(ixeg.733.autothrottle.lua.aes) debug: 41.186: gizmo.dofile(ixeg.733.ehsi.main.lua.aes) debug: 41.223: gizmo.dofile(ixeg.733.ehsi.parts.lua.aes) debug: 41.226: gizmo.dofile(ixeg.733.wx.main.lua.aes) debug: 41.258: gizmo.dofile(ixeg.733.draw_route.lua.aes) debug: 41.264: gizmo.dofile(ixeg.733.audiopanel.lua.aes) debug: 41.281: gizmo.dofile(ixeg.733.vortex.lua.aes) debug: 41.315: gizmo.dofile(ixeg.733.draw_fan.lua.aes) debug: 41.317: gizmo.dofile(ixeg.733.tips.lua.aes) debug: 41.439: Script: OnKickStart: Finished. debug: 107.018: INIT SYSTEMS debug: 107.104: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 107.121: Firmware v15.12.22.1106 warng: 107.125: GUI Read Key Protection Applied. debug: 107.133: X-Plugins OBJ8 Loader v15.01.11 debug: 107.135: * gxt.refresh().. debug: 107.143: gxt: AutoLoading.. debug: 107.144: gxt.load: Console debug: 107.145: gxt.load: ToolTray debug: 107.146: gxt.load: HotFix debug: 107.147: gxt.load: Mute debug: 107.148: gxt.load: Preferences debug: 107.149: gxt.load: RebootButton debug: 107.150: gxt.load: MAXX_RWC debug: 107.151: gxt.load: XA_Activation debug: 107.161: gxt.load: Shell debug: 107.162: gxt: Completed AutoLoad. debug: 107.163: Script: OnKickStart debug: 107.164: Found scripts/init.lua.aes debug: 107.164: gizmo.dofile(init.lua.aes) debug: 107.166: gizmo.dofile(ixeg_manip_utils.lua.aes) debug: 107.167: gizmo.dofile(ixeg.733.utils.lua.aes) debug: 107.168: gizmo.dofile(xscenery_sounds.lua.aes) debug: 107.170: gizmo.dofile(ixeg.733.sounds.lua.aes) debug: 107.346: gizmo.dofile(ixeg.733.electrical.lua.aes) debug: 107.351: gizmo.dofile(ixeg.733.annunciators.lua.aes) debug: 107.354: gizmo.dofile(ixeg.733.lighting.lua.aes) debug: 107.358: gizmo.dofile(ixeg.733.common_datarefs.lua.aes) debug: 107.365: gizmo.dofile(ixeg.733.config.lua.aes) debug: 107.366: Loaded IXEG preferences. debug: 107.367: gizmo.dofile(ixeg.733.electrical.indicators.lua.aes) debug: 107.368: gizmo.dofile(ixeg.733.misc.lua.aes) debug: 107.435: gizmo.dofile(ixeg.733.masi.lua.aes) debug: 107.440: gizmo.dofile(ixeg.733.fm.fusecd.lua.aes) debug: 107.442: gizmo.dofile(ixeg.733.fm.thrust.lua.aes) debug: 107.443: gizmo.dofile(ixeg.733.eadi.datarefs.lua.aes) debug: 107.445: gizmo.dofile(ixeg.733.bleedair.variables.lua.aes) debug: 107.448: gizmo.dofile(ixeg.733.bleedair.logic.lua.aes) debug: 107.449: gizmo.dofile(ixeg.733.pressurization.logic.lua.aes) debug: 107.454: gizmo.dofile(ixeg.733.aircond.lua.aes) debug: 107.460: gizmo.dofile(ixeg.733.apu.lua.aes) debug: 107.461: gizmo.dofile(ixeg.733.irs.lua.aes) debug: 107.468: gizmo.dofile(ixeg.733.eadi.drawutils.lua.aes) debug: 107.470: gizmo.dofile(ixeg.733.eadi.main.lua.aes) debug: 107.482: gizmo.dofile(ixeg.733.eadi.misc.lua.aes) debug: 107.484: gizmo.dofile(ixeg.733.camera.main.lua.aes) debug: 107.485: gizmo.dofile(ixeg.733.camera.control.lua.aes) debug: 107.487: gizmo.dofile(ixeg.733.hydraulics.lua.aes) debug: 107.503: gizmo.dofile(ixeg.733.fm.flaps.lua.aes) debug: 107.506: gizmo.dofile(ixeg.733.altimeters.lua.aes) debug: 107.510: gizmo.dofile(ixeg.733.groundmodel.lua.aes) debug: 107.513: gizmo.dofile(ixeg.733.engine.starter.lua.aes) debug: 107.515: gizmo.dofile(ixeg.733.clocks.lua.aes) debug: 107.518: gizmo.dofile(ixeg.733.mcp.lua.aes) debug: 107.528: gizmo.dofile(ixeg.733.lcds.lua.aes) debug: 107.531: gizmo.dofile(ixeg.733.firewarning.lua.aes) debug: 107.538: gizmo.dofile(ixeg.733.fuel.lua.aes) debug: 107.545: gizmo.dofile(ixeg.733.ecam.main.lua.aes) debug: 107.555: gizmo.dofile(ixeg.733.gui.lua.aes) debug: 107.587: gizmo.dofile(ixeg.733.gui.preflight.lua.aes) debug: 107.588: gizmo.dofile(ixeg.733.gui.prefs.lua.aes) debug: 107.590: gizmo.dofile(ixeg.733.gui.failures.lua.aes) debug: 107.597: gizmo.dofile(ixeg.733.gui.views.lua.aes) debug: 107.598: gizmo.dofile(ixeg.733.windscreen_effects.lua.aes) debug: 107.600: gizmo.dofile(ixeg.733.antiice.lua.aes) debug: 107.607: gizmo.dofile(ixeg.733.gearhandle.lua.aes) debug: 107.611: gizmo.dofile(ixeg.733.radios.lua.aes) debug: 107.624: gizmo.dofile(ixeg.733.fmc.assets.lua.aes) debug: 107.654: gizmo.dofile(ixeg.733.fmc.gui.lua.aes) debug: 107.667: gizmo.dofile(ixeg.733.fmc.ident.lua.aes) debug: 107.668: gizmo.dofile(ixeg.733.fmc.pos_init.lua.aes) debug: 107.669: gizmo.dofile(ixeg.733.fmc.route.lua.aes) debug: 107.672: gizmo.dofile(ixeg.733.fmc.alt_dest.lua.aes) debug: 107.673: gizmo.dofile(ixeg.733.fmc.legs.lua.aes) debug: 107.674: gizmo.dofile(ixeg.733.fmc.hold.lua.aes) debug: 107.675: gizmo.dofile(ixeg.733.fmc.fix.lua.aes) debug: 107.676: gizmo.dofile(ixeg.733.fmc.prog.lua.aes) debug: 107.677: gizmo.dofile(ixeg.733.fmc.deparr.lua.aes) debug: 107.678: gizmo.dofile(ixeg.733.fmc.departures.lua.aes) debug: 107.680: gizmo.dofile(ixeg.733.fmc.arrivals.lua.aes) debug: 107.681: gizmo.dofile(ixeg.733.fmc.n1_limits.lua.aes) debug: 107.683: gizmo.dofile(ixeg.733.fmc.perf_init.lua.aes) debug: 107.684: gizmo.dofile(ixeg.733.fmc.takeoff.lua.aes) debug: 107.685: gizmo.dofile(ixeg.733.fmc.approach.lua.aes) debug: 107.686: gizmo.dofile(ixeg.733.fmc.vnav.lua.aes) debug: 107.689: gizmo.dofile(ixeg.733.fmc.climb.lua.aes) debug: 107.691: gizmo.dofile(ixeg.733.fmc.descent.lua.aes) debug: 107.692: gizmo.dofile(ixeg.733.fmc.cruise.lua.aes) debug: 107.693: gizmo.dofile(ixeg.733.fmc.menu.lua.aes) debug: 107.694: gizmo.dofile(ixeg.733.fmc.duplicates.lua.aes) debug: 107.695: gizmo.dofile(ixeg.733.fmc.prefs.lua.aes) debug: 107.696: gizmo.dofile(ixeg.733.autopilot.lua.aes) debug: 107.709: gizmo.dofile(ixeg.733.autothrottle.lua.aes) debug: 107.713: gizmo.dofile(ixeg.733.ehsi.main.lua.aes) debug: 107.731: gizmo.dofile(ixeg.733.ehsi.parts.lua.aes) debug: 107.734: gizmo.dofile(ixeg.733.wx.main.lua.aes) debug: 107.748: gizmo.dofile(ixeg.733.draw_route.lua.aes) debug: 107.754: gizmo.dofile(ixeg.733.audiopanel.lua.aes) debug: 107.781: gizmo.dofile(ixeg.733.vortex.lua.aes) debug: 107.786: gizmo.dofile(ixeg.733.draw_fan.lua.aes) debug: 107.788: gizmo.dofile(ixeg.733.tips.lua.aes) debug: 107.879: Script: OnKickStart: Finished. debug: 107.879: INIT SYSTEMS debug: 226.829: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 226.836: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 226.869: Firmware v15.12.22.1106 warng: 226.871: GUI Read Key Protection Applied. debug: 226.876: X-Plugins OBJ8 Loader v15.01.11 debug: 226.877: * gxt.refresh().. debug: 226.883: gxt: AutoLoading.. debug: 226.884: gxt.load: Console debug: 226.885: gxt.load: ToolTray debug: 226.886: gxt.load: HotFix debug: 226.887: gxt.load: Mute debug: 226.888: gxt.load: Preferences debug: 226.889: gxt.load: RebootButton debug: 226.889: gxt.load: MAXX_RWC debug: 226.890: gxt.load: XA_Activation debug: 226.899: gxt.load: Shell debug: 226.900: gxt: Completed AutoLoad. debug: 226.900: Script: OnKickStart debug: 226.901: Found scripts/init.lua.aes debug: 226.901: gizmo.dofile(init.lua.aes) debug: 226.902: gizmo.dofile(ixeg_manip_utils.lua.aes) debug: 226.904: gizmo.dofile(ixeg.733.utils.lua.aes) debug: 226.905: gizmo.dofile(xscenery_sounds.lua.aes) debug: 226.906: gizmo.dofile(ixeg.733.sounds.lua.aes) debug: 227.020: gizmo.dofile(ixeg.733.electrical.lua.aes) debug: 227.023: gizmo.dofile(ixeg.733.annunciators.lua.aes) debug: 227.025: gizmo.dofile(ixeg.733.lighting.lua.aes) debug: 227.028: gizmo.dofile(ixeg.733.common_datarefs.lua.aes) debug: 227.031: gizmo.dofile(ixeg.733.config.lua.aes) debug: 227.032: Loaded IXEG preferences. debug: 227.032: gizmo.dofile(ixeg.733.electrical.indicators.lua.aes) debug: 227.033: gizmo.dofile(ixeg.733.misc.lua.aes) debug: 227.081: gizmo.dofile(ixeg.733.masi.lua.aes) debug: 227.085: gizmo.dofile(ixeg.733.fm.fusecd.lua.aes) debug: 227.086: gizmo.dofile(ixeg.733.fm.thrust.lua.aes) debug: 227.087: gizmo.dofile(ixeg.733.eadi.datarefs.lua.aes) debug: 227.088: gizmo.dofile(ixeg.733.bleedair.variables.lua.aes) debug: 227.090: gizmo.dofile(ixeg.733.bleedair.logic.lua.aes) debug: 227.091: gizmo.dofile(ixeg.733.pressurization.logic.lua.aes) debug: 227.094: gizmo.dofile(ixeg.733.aircond.lua.aes) debug: 227.098: gizmo.dofile(ixeg.733.apu.lua.aes) debug: 227.099: gizmo.dofile(ixeg.733.irs.lua.aes) debug: 227.103: gizmo.dofile(ixeg.733.eadi.drawutils.lua.aes) debug: 227.104: gizmo.dofile(ixeg.733.eadi.main.lua.aes) debug: 227.112: gizmo.dofile(ixeg.733.eadi.misc.lua.aes) debug: 227.114: gizmo.dofile(ixeg.733.camera.main.lua.aes) debug: 227.115: gizmo.dofile(ixeg.733.camera.control.lua.aes) debug: 227.116: gizmo.dofile(ixeg.733.hydraulics.lua.aes) debug: 227.126: gizmo.dofile(ixeg.733.fm.flaps.lua.aes) debug: 227.128: gizmo.dofile(ixeg.733.altimeters.lua.aes) debug: 227.130: gizmo.dofile(ixeg.733.groundmodel.lua.aes) debug: 227.132: gizmo.dofile(ixeg.733.engine.starter.lua.aes) debug: 227.134: gizmo.dofile(ixeg.733.clocks.lua.aes) debug: 227.136: gizmo.dofile(ixeg.733.mcp.lua.aes) debug: 227.142: gizmo.dofile(ixeg.733.lcds.lua.aes) debug: 227.143: gizmo.dofile(ixeg.733.firewarning.lua.aes) debug: 227.149: gizmo.dofile(ixeg.733.fuel.lua.aes) debug: 227.153: gizmo.dofile(ixeg.733.ecam.main.lua.aes) debug: 227.159: gizmo.dofile(ixeg.733.gui.lua.aes) debug: 227.182: gizmo.dofile(ixeg.733.gui.preflight.lua.aes) debug: 227.183: gizmo.dofile(ixeg.733.gui.prefs.lua.aes) debug: 227.184: gizmo.dofile(ixeg.733.gui.failures.lua.aes) debug: 227.190: gizmo.dofile(ixeg.733.gui.views.lua.aes) debug: 227.191: gizmo.dofile(ixeg.733.windscreen_effects.lua.aes) debug: 227.192: gizmo.dofile(ixeg.733.antiice.lua.aes) debug: 227.196: gizmo.dofile(ixeg.733.gearhandle.lua.aes) debug: 227.198: gizmo.dofile(ixeg.733.radios.lua.aes) debug: 227.206: gizmo.dofile(ixeg.733.fmc.assets.lua.aes) debug: 227.223: gizmo.dofile(ixeg.733.fmc.gui.lua.aes) debug: 227.231: gizmo.dofile(ixeg.733.fmc.ident.lua.aes) debug: 227.232: gizmo.dofile(ixeg.733.fmc.pos_init.lua.aes) debug: 227.233: gizmo.dofile(ixeg.733.fmc.route.lua.aes) debug: 227.235: gizmo.dofile(ixeg.733.fmc.alt_dest.lua.aes) debug: 227.236: gizmo.dofile(ixeg.733.fmc.legs.lua.aes) debug: 227.237: gizmo.dofile(ixeg.733.fmc.hold.lua.aes) debug: 227.237: gizmo.dofile(ixeg.733.fmc.fix.lua.aes) debug: 227.238: gizmo.dofile(ixeg.733.fmc.prog.lua.aes) debug: 227.239: gizmo.dofile(ixeg.733.fmc.deparr.lua.aes) debug: 227.240: gizmo.dofile(ixeg.733.fmc.departures.lua.aes) debug: 227.241: gizmo.dofile(ixeg.733.fmc.arrivals.lua.aes) debug: 227.242: gizmo.dofile(ixeg.733.fmc.n1_limits.lua.aes) debug: 227.243: gizmo.dofile(ixeg.733.fmc.perf_init.lua.aes) debug: 227.244: gizmo.dofile(ixeg.733.fmc.takeoff.lua.aes) debug: 227.245: gizmo.dofile(ixeg.733.fmc.approach.lua.aes) debug: 227.245: gizmo.dofile(ixeg.733.fmc.vnav.lua.aes) debug: 227.248: gizmo.dofile(ixeg.733.fmc.climb.lua.aes) debug: 227.249: gizmo.dofile(ixeg.733.fmc.descent.lua.aes) debug: 227.250: gizmo.dofile(ixeg.733.fmc.cruise.lua.aes) debug: 227.251: gizmo.dofile(ixeg.733.fmc.menu.lua.aes) debug: 227.251: gizmo.dofile(ixeg.733.fmc.duplicates.lua.aes) debug: 227.252: gizmo.dofile(ixeg.733.fmc.prefs.lua.aes) debug: 227.253: gizmo.dofile(ixeg.733.autopilot.lua.aes) debug: 227.261: gizmo.dofile(ixeg.733.autothrottle.lua.aes) debug: 227.265: gizmo.dofile(ixeg.733.ehsi.main.lua.aes) debug: 227.286: gizmo.dofile(ixeg.733.ehsi.parts.lua.aes) debug: 227.288: gizmo.dofile(ixeg.733.wx.main.lua.aes) debug: 227.312: gizmo.dofile(ixeg.733.draw_route.lua.aes) debug: 227.315: gizmo.dofile(ixeg.733.audiopanel.lua.aes) debug: 227.333: gizmo.dofile(ixeg.733.vortex.lua.aes) debug: 227.336: gizmo.dofile(ixeg.733.draw_fan.lua.aes) debug: 227.337: gizmo.dofile(ixeg.733.tips.lua.aes) debug: 227.404: Script: OnKickStart: Finished. debug: 242.570: INIT SYSTEMS debug: 242.607: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 242.626: Firmware v15.12.22.1106 warng: 242.629: GUI Read Key Protection Applied. debug: 242.634: X-Plugins OBJ8 Loader v15.01.11 debug: 242.636: * gxt.refresh().. debug: 242.641: gxt: AutoLoading.. debug: 242.641: gxt.load: Console debug: 242.642: gxt.load: ToolTray debug: 242.643: gxt.load: HotFix debug: 242.644: gxt.load: Mute debug: 242.645: gxt.load: Preferences debug: 242.645: gxt.load: RebootButton debug: 242.646: gxt.load: MAXX_RWC debug: 242.647: gxt.load: XA_Activation debug: 242.656: gxt.load: Shell debug: 242.657: gxt: Completed AutoLoad. debug: 242.657: Script: OnKickStart debug: 242.658: Found scripts/init.lua.aes debug: 242.658: gizmo.dofile(init.lua.aes) debug: 242.659: gizmo.dofile(ixeg_manip_utils.lua.aes) debug: 242.660: gizmo.dofile(ixeg.733.utils.lua.aes) debug: 242.661: gizmo.dofile(xscenery_sounds.lua.aes) debug: 242.662: gizmo.dofile(ixeg.733.sounds.lua.aes) debug: 242.774: gizmo.dofile(ixeg.733.electrical.lua.aes) debug: 242.778: gizmo.dofile(ixeg.733.annunciators.lua.aes) debug: 242.779: gizmo.dofile(ixeg.733.lighting.lua.aes) debug: 242.782: gizmo.dofile(ixeg.733.common_datarefs.lua.aes) debug: 242.785: gizmo.dofile(ixeg.733.config.lua.aes) debug: 242.786: Loaded IXEG preferences. debug: 242.786: gizmo.dofile(ixeg.733.electrical.indicators.lua.aes) debug: 242.788: gizmo.dofile(ixeg.733.misc.lua.aes) debug: 242.835: gizmo.dofile(ixeg.733.masi.lua.aes) debug: 242.839: gizmo.dofile(ixeg.733.fm.fusecd.lua.aes) debug: 242.839: gizmo.dofile(ixeg.733.fm.thrust.lua.aes) debug: 242.840: gizmo.dofile(ixeg.733.eadi.datarefs.lua.aes) debug: 242.841: gizmo.dofile(ixeg.733.bleedair.variables.lua.aes) debug: 242.843: gizmo.dofile(ixeg.733.bleedair.logic.lua.aes) debug: 242.844: gizmo.dofile(ixeg.733.pressurization.logic.lua.aes) debug: 242.847: gizmo.dofile(ixeg.733.aircond.lua.aes) debug: 242.851: gizmo.dofile(ixeg.733.apu.lua.aes) debug: 242.852: gizmo.dofile(ixeg.733.irs.lua.aes) debug: 242.856: gizmo.dofile(ixeg.733.eadi.drawutils.lua.aes) debug: 242.857: gizmo.dofile(ixeg.733.eadi.main.lua.aes) debug: 242.865: gizmo.dofile(ixeg.733.eadi.misc.lua.aes) debug: 242.867: gizmo.dofile(ixeg.733.camera.main.lua.aes) debug: 242.868: gizmo.dofile(ixeg.733.camera.control.lua.aes) debug: 242.869: gizmo.dofile(ixeg.733.hydraulics.lua.aes) debug: 242.878: gizmo.dofile(ixeg.733.fm.flaps.lua.aes) debug: 242.880: gizmo.dofile(ixeg.733.altimeters.lua.aes) debug: 242.883: gizmo.dofile(ixeg.733.groundmodel.lua.aes) debug: 242.885: gizmo.dofile(ixeg.733.engine.starter.lua.aes) debug: 242.886: gizmo.dofile(ixeg.733.clocks.lua.aes) debug: 242.888: gizmo.dofile(ixeg.733.mcp.lua.aes) debug: 242.894: gizmo.dofile(ixeg.733.lcds.lua.aes) debug: 242.895: gizmo.dofile(ixeg.733.firewarning.lua.aes) debug: 242.899: gizmo.dofile(ixeg.733.fuel.lua.aes) debug: 242.903: gizmo.dofile(ixeg.733.ecam.main.lua.aes) debug: 242.909: gizmo.dofile(ixeg.733.gui.lua.aes) debug: 242.932: gizmo.dofile(ixeg.733.gui.preflight.lua.aes) debug: 242.933: gizmo.dofile(ixeg.733.gui.prefs.lua.aes) debug: 242.934: gizmo.dofile(ixeg.733.gui.failures.lua.aes) debug: 242.937: gizmo.dofile(ixeg.733.gui.views.lua.aes) debug: 242.937: gizmo.dofile(ixeg.733.windscreen_effects.lua.aes) debug: 242.939: gizmo.dofile(ixeg.733.antiice.lua.aes) debug: 242.943: gizmo.dofile(ixeg.733.gearhandle.lua.aes) debug: 242.945: gizmo.dofile(ixeg.733.radios.lua.aes) debug: 242.953: gizmo.dofile(ixeg.733.fmc.assets.lua.aes) debug: 242.970: gizmo.dofile(ixeg.733.fmc.gui.lua.aes) debug: 242.978: gizmo.dofile(ixeg.733.fmc.ident.lua.aes) debug: 242.978: gizmo.dofile(ixeg.733.fmc.pos_init.lua.aes) debug: 242.979: gizmo.dofile(ixeg.733.fmc.route.lua.aes) debug: 242.981: gizmo.dofile(ixeg.733.fmc.alt_dest.lua.aes) debug: 242.982: gizmo.dofile(ixeg.733.fmc.legs.lua.aes) debug: 242.982: gizmo.dofile(ixeg.733.fmc.hold.lua.aes) debug: 242.983: gizmo.dofile(ixeg.733.fmc.fix.lua.aes) debug: 242.984: gizmo.dofile(ixeg.733.fmc.prog.lua.aes) debug: 242.985: gizmo.dofile(ixeg.733.fmc.deparr.lua.aes) debug: 242.985: gizmo.dofile(ixeg.733.fmc.departures.lua.aes) debug: 242.986: gizmo.dofile(ixeg.733.fmc.arrivals.lua.aes) debug: 242.987: gizmo.dofile(ixeg.733.fmc.n1_limits.lua.aes) debug: 242.989: gizmo.dofile(ixeg.733.fmc.perf_init.lua.aes) debug: 242.990: gizmo.dofile(ixeg.733.fmc.takeoff.lua.aes) debug: 242.990: gizmo.dofile(ixeg.733.fmc.approach.lua.aes) debug: 242.991: gizmo.dofile(ixeg.733.fmc.vnav.lua.aes) debug: 242.994: gizmo.dofile(ixeg.733.fmc.climb.lua.aes) debug: 242.995: gizmo.dofile(ixeg.733.fmc.descent.lua.aes) debug: 242.996: gizmo.dofile(ixeg.733.fmc.cruise.lua.aes) debug: 242.996: gizmo.dofile(ixeg.733.fmc.menu.lua.aes) debug: 242.997: gizmo.dofile(ixeg.733.fmc.duplicates.lua.aes) debug: 242.998: gizmo.dofile(ixeg.733.fmc.prefs.lua.aes) debug: 242.998: gizmo.dofile(ixeg.733.autopilot.lua.aes) debug: 243.009: gizmo.dofile(ixeg.733.autothrottle.lua.aes) debug: 243.012: gizmo.dofile(ixeg.733.ehsi.main.lua.aes) debug: 243.023: gizmo.dofile(ixeg.733.ehsi.parts.lua.aes) debug: 243.025: gizmo.dofile(ixeg.733.wx.main.lua.aes) debug: 243.037: gizmo.dofile(ixeg.733.draw_route.lua.aes) debug: 243.041: gizmo.dofile(ixeg.733.audiopanel.lua.aes) debug: 243.058: gizmo.dofile(ixeg.733.vortex.lua.aes) debug: 243.060: gizmo.dofile(ixeg.733.draw_fan.lua.aes) debug: 243.062: gizmo.dofile(ixeg.733.tips.lua.aes) debug: 243.129: Script: OnKickStart: Finished. debug: 243.130: INIT SYSTEMS debug: 258.045: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 258.054: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 258.086: Firmware v15.12.22.1106 warng: 258.088: GUI Read Key Protection Applied. debug: 258.092: X-Plugins OBJ8 Loader v15.01.11 debug: 258.094: * gxt.refresh().. debug: 258.098: gxt: AutoLoading.. debug: 258.099: gxt.load: Console debug: 258.100: gxt.load: ToolTray debug: 258.100: gxt.load: HotFix debug: 258.101: gxt.load: Mute debug: 258.102: gxt.load: Preferences debug: 258.103: gxt.load: RebootButton debug: 258.103: gxt.load: MAXX_RWC debug: 258.104: gxt.load: XA_Activation debug: 258.113: gxt.load: Shell debug: 258.113: gxt: Completed AutoLoad. debug: 258.114: Script: OnKickStart debug: 258.114: Found scripts/init.lua.aes debug: 258.115: gizmo.dofile(init.lua.aes) debug: 258.116: gizmo.dofile(ixeg_manip_utils.lua.aes) debug: 258.117: gizmo.dofile(ixeg.733.utils.lua.aes) debug: 258.119: gizmo.dofile(xscenery_sounds.lua.aes) debug: 258.120: gizmo.dofile(ixeg.733.sounds.lua.aes) debug: 258.233: gizmo.dofile(ixeg.733.electrical.lua.aes) debug: 258.238: gizmo.dofile(ixeg.733.annunciators.lua.aes) debug: 258.239: gizmo.dofile(ixeg.733.lighting.lua.aes) debug: 258.242: gizmo.dofile(ixeg.733.common_datarefs.lua.aes) debug: 258.245: gizmo.dofile(ixeg.733.config.lua.aes) debug: 258.246: Loaded IXEG preferences. debug: 258.247: gizmo.dofile(ixeg.733.electrical.indicators.lua.aes) debug: 258.248: gizmo.dofile(ixeg.733.misc.lua.aes) debug: 258.295: gizmo.dofile(ixeg.733.masi.lua.aes) debug: 258.299: gizmo.dofile(ixeg.733.fm.fusecd.lua.aes) debug: 258.300: gizmo.dofile(ixeg.733.fm.thrust.lua.aes) debug: 258.301: gizmo.dofile(ixeg.733.eadi.datarefs.lua.aes) debug: 258.302: gizmo.dofile(ixeg.733.bleedair.variables.lua.aes) debug: 258.304: gizmo.dofile(ixeg.733.bleedair.logic.lua.aes) debug: 258.305: gizmo.dofile(ixeg.733.pressurization.logic.lua.aes) debug: 258.309: gizmo.dofile(ixeg.733.aircond.lua.aes) debug: 258.312: gizmo.dofile(ixeg.733.apu.lua.aes) debug: 258.313: gizmo.dofile(ixeg.733.irs.lua.aes) debug: 258.317: gizmo.dofile(ixeg.733.eadi.drawutils.lua.aes) debug: 258.318: gizmo.dofile(ixeg.733.eadi.main.lua.aes) debug: 258.327: gizmo.dofile(ixeg.733.eadi.misc.lua.aes) debug: 258.329: gizmo.dofile(ixeg.733.camera.main.lua.aes) debug: 258.330: gizmo.dofile(ixeg.733.camera.control.lua.aes) debug: 258.330: gizmo.dofile(ixeg.733.hydraulics.lua.aes) debug: 258.341: gizmo.dofile(ixeg.733.fm.flaps.lua.aes) debug: 258.343: gizmo.dofile(ixeg.733.altimeters.lua.aes) debug: 258.345: gizmo.dofile(ixeg.733.groundmodel.lua.aes) debug: 258.347: gizmo.dofile(ixeg.733.engine.starter.lua.aes) debug: 258.348: gizmo.dofile(ixeg.733.clocks.lua.aes) debug: 258.350: gizmo.dofile(ixeg.733.mcp.lua.aes) debug: 258.357: gizmo.dofile(ixeg.733.lcds.lua.aes) debug: 258.358: gizmo.dofile(ixeg.733.firewarning.lua.aes) debug: 258.362: gizmo.dofile(ixeg.733.fuel.lua.aes) debug: 258.366: gizmo.dofile(ixeg.733.ecam.main.lua.aes) debug: 258.373: gizmo.dofile(ixeg.733.gui.lua.aes) debug: 258.396: gizmo.dofile(ixeg.733.gui.preflight.lua.aes) debug: 258.397: gizmo.dofile(ixeg.733.gui.prefs.lua.aes) debug: 258.398: gizmo.dofile(ixeg.733.gui.failures.lua.aes) debug: 258.401: gizmo.dofile(ixeg.733.gui.views.lua.aes) debug: 258.402: gizmo.dofile(ixeg.733.windscreen_effects.lua.aes) debug: 258.403: gizmo.dofile(ixeg.733.antiice.lua.aes) debug: 258.407: gizmo.dofile(ixeg.733.gearhandle.lua.aes) debug: 258.410: gizmo.dofile(ixeg.733.radios.lua.aes) debug: 258.418: gizmo.dofile(ixeg.733.fmc.assets.lua.aes) debug: 258.435: gizmo.dofile(ixeg.733.fmc.gui.lua.aes) debug: 258.442: gizmo.dofile(ixeg.733.fmc.ident.lua.aes) debug: 258.443: gizmo.dofile(ixeg.733.fmc.pos_init.lua.aes) debug: 258.444: gizmo.dofile(ixeg.733.fmc.route.lua.aes) debug: 258.446: gizmo.dofile(ixeg.733.fmc.alt_dest.lua.aes) debug: 258.447: gizmo.dofile(ixeg.733.fmc.legs.lua.aes) debug: 258.448: gizmo.dofile(ixeg.733.fmc.hold.lua.aes) debug: 258.448: gizmo.dofile(ixeg.733.fmc.fix.lua.aes) debug: 258.449: gizmo.dofile(ixeg.733.fmc.prog.lua.aes) debug: 258.450: gizmo.dofile(ixeg.733.fmc.deparr.lua.aes) debug: 258.451: gizmo.dofile(ixeg.733.fmc.departures.lua.aes) debug: 258.452: gizmo.dofile(ixeg.733.fmc.arrivals.lua.aes) debug: 258.453: gizmo.dofile(ixeg.733.fmc.n1_limits.lua.aes) debug: 258.454: gizmo.dofile(ixeg.733.fmc.perf_init.lua.aes) debug: 258.455: gizmo.dofile(ixeg.733.fmc.takeoff.lua.aes) debug: 258.456: gizmo.dofile(ixeg.733.fmc.approach.lua.aes) debug: 258.457: gizmo.dofile(ixeg.733.fmc.vnav.lua.aes) debug: 258.459: gizmo.dofile(ixeg.733.fmc.climb.lua.aes) debug: 258.460: gizmo.dofile(ixeg.733.fmc.descent.lua.aes) debug: 258.461: gizmo.dofile(ixeg.733.fmc.cruise.lua.aes) debug: 258.462: gizmo.dofile(ixeg.733.fmc.menu.lua.aes) debug: 258.463: gizmo.dofile(ixeg.733.fmc.duplicates.lua.aes) debug: 258.463: gizmo.dofile(ixeg.733.fmc.prefs.lua.aes) debug: 258.464: gizmo.dofile(ixeg.733.autopilot.lua.aes) debug: 258.473: gizmo.dofile(ixeg.733.autothrottle.lua.aes) debug: 258.476: gizmo.dofile(ixeg.733.ehsi.main.lua.aes) debug: 258.498: gizmo.dofile(ixeg.733.ehsi.parts.lua.aes) debug: 258.500: gizmo.dofile(ixeg.733.wx.main.lua.aes) debug: 258.517: gizmo.dofile(ixeg.733.draw_route.lua.aes) debug: 258.520: gizmo.dofile(ixeg.733.audiopanel.lua.aes) debug: 258.540: gizmo.dofile(ixeg.733.vortex.lua.aes) debug: 258.542: gizmo.dofile(ixeg.733.draw_fan.lua.aes) debug: 258.544: gizmo.dofile(ixeg.733.tips.lua.aes) debug: 258.611: Script: OnKickStart: Finished. debug: 273.986: INIT SYSTEMS debug: 274.029: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 274.049: Firmware v15.12.22.1106 warng: 274.052: GUI Read Key Protection Applied. debug: 274.057: X-Plugins OBJ8 Loader v15.01.11 debug: 274.059: * gxt.refresh().. debug: 274.065: gxt: AutoLoading.. debug: 274.066: gxt.load: Console debug: 274.067: gxt.load: ToolTray debug: 274.068: gxt.load: HotFix debug: 274.069: gxt.load: Mute debug: 274.070: gxt.load: Preferences debug: 274.071: gxt.load: RebootButton debug: 274.072: gxt.load: MAXX_RWC debug: 274.073: gxt.load: XA_Activation debug: 274.081: gxt.load: Shell debug: 274.082: gxt: Completed AutoLoad. debug: 274.083: Script: OnKickStart debug: 274.083: Found scripts/init.lua.aes debug: 274.084: gizmo.dofile(init.lua.aes) debug: 274.085: gizmo.dofile(ixeg_manip_utils.lua.aes) debug: 274.086: gizmo.dofile(ixeg.733.utils.lua.aes) debug: 274.087: gizmo.dofile(xscenery_sounds.lua.aes) debug: 274.088: gizmo.dofile(ixeg.733.sounds.lua.aes) debug: 274.204: gizmo.dofile(ixeg.733.electrical.lua.aes) debug: 274.210: gizmo.dofile(ixeg.733.annunciators.lua.aes) debug: 274.211: gizmo.dofile(ixeg.733.lighting.lua.aes) debug: 274.214: gizmo.dofile(ixeg.733.common_datarefs.lua.aes) debug: 274.218: gizmo.dofile(ixeg.733.config.lua.aes) debug: 274.219: Loaded IXEG preferences. debug: 274.219: gizmo.dofile(ixeg.733.electrical.indicators.lua.aes) debug: 274.220: gizmo.dofile(ixeg.733.misc.lua.aes) debug: 274.268: gizmo.dofile(ixeg.733.masi.lua.aes) debug: 274.272: gizmo.dofile(ixeg.733.fm.fusecd.lua.aes) debug: 274.272: gizmo.dofile(ixeg.733.fm.thrust.lua.aes) debug: 274.273: gizmo.dofile(ixeg.733.eadi.datarefs.lua.aes) debug: 274.274: gizmo.dofile(ixeg.733.bleedair.variables.lua.aes) debug: 274.276: gizmo.dofile(ixeg.733.bleedair.logic.lua.aes) debug: 274.277: gizmo.dofile(ixeg.733.pressurization.logic.lua.aes) debug: 274.280: gizmo.dofile(ixeg.733.aircond.lua.aes) debug: 274.284: gizmo.dofile(ixeg.733.apu.lua.aes) debug: 274.285: gizmo.dofile(ixeg.733.irs.lua.aes) debug: 274.289: gizmo.dofile(ixeg.733.eadi.drawutils.lua.aes) debug: 274.290: gizmo.dofile(ixeg.733.eadi.main.lua.aes) debug: 274.299: gizmo.dofile(ixeg.733.eadi.misc.lua.aes) debug: 274.301: gizmo.dofile(ixeg.733.camera.main.lua.aes) debug: 274.302: gizmo.dofile(ixeg.733.camera.control.lua.aes) debug: 274.303: gizmo.dofile(ixeg.733.hydraulics.lua.aes) debug: 274.313: gizmo.dofile(ixeg.733.fm.flaps.lua.aes) debug: 274.316: gizmo.dofile(ixeg.733.altimeters.lua.aes) debug: 274.318: gizmo.dofile(ixeg.733.groundmodel.lua.aes) debug: 274.320: gizmo.dofile(ixeg.733.engine.starter.lua.aes) debug: 274.321: gizmo.dofile(ixeg.733.clocks.lua.aes) debug: 274.323: gizmo.dofile(ixeg.733.mcp.lua.aes) debug: 274.329: gizmo.dofile(ixeg.733.lcds.lua.aes) debug: 274.330: gizmo.dofile(ixeg.733.firewarning.lua.aes) debug: 274.335: gizmo.dofile(ixeg.733.fuel.lua.aes) debug: 274.339: gizmo.dofile(ixeg.733.ecam.main.lua.aes) debug: 274.345: gizmo.dofile(ixeg.733.gui.lua.aes) debug: 274.367: gizmo.dofile(ixeg.733.gui.preflight.lua.aes) debug: 274.369: gizmo.dofile(ixeg.733.gui.prefs.lua.aes) debug: 274.369: gizmo.dofile(ixeg.733.gui.failures.lua.aes) debug: 274.373: gizmo.dofile(ixeg.733.gui.views.lua.aes) debug: 274.373: gizmo.dofile(ixeg.733.windscreen_effects.lua.aes) debug: 274.375: gizmo.dofile(ixeg.733.antiice.lua.aes) debug: 274.379: gizmo.dofile(ixeg.733.gearhandle.lua.aes) debug: 274.381: gizmo.dofile(ixeg.733.radios.lua.aes) debug: 274.389: gizmo.dofile(ixeg.733.fmc.assets.lua.aes) debug: 274.407: gizmo.dofile(ixeg.733.fmc.gui.lua.aes) debug: 274.415: gizmo.dofile(ixeg.733.fmc.ident.lua.aes) debug: 274.416: gizmo.dofile(ixeg.733.fmc.pos_init.lua.aes) debug: 274.417: gizmo.dofile(ixeg.733.fmc.route.lua.aes) debug: 274.419: gizmo.dofile(ixeg.733.fmc.alt_dest.lua.aes) debug: 274.419: gizmo.dofile(ixeg.733.fmc.legs.lua.aes) debug: 274.420: gizmo.dofile(ixeg.733.fmc.hold.lua.aes) debug: 274.421: gizmo.dofile(ixeg.733.fmc.fix.lua.aes) debug: 274.422: gizmo.dofile(ixeg.733.fmc.prog.lua.aes) debug: 274.423: gizmo.dofile(ixeg.733.fmc.deparr.lua.aes) debug: 274.424: gizmo.dofile(ixeg.733.fmc.departures.lua.aes) debug: 274.425: gizmo.dofile(ixeg.733.fmc.arrivals.lua.aes) debug: 274.426: gizmo.dofile(ixeg.733.fmc.n1_limits.lua.aes) debug: 274.427: gizmo.dofile(ixeg.733.fmc.perf_init.lua.aes) debug: 274.428: gizmo.dofile(ixeg.733.fmc.takeoff.lua.aes) debug: 274.429: gizmo.dofile(ixeg.733.fmc.approach.lua.aes) debug: 274.430: gizmo.dofile(ixeg.733.fmc.vnav.lua.aes) debug: 274.432: gizmo.dofile(ixeg.733.fmc.climb.lua.aes) debug: 274.433: gizmo.dofile(ixeg.733.fmc.descent.lua.aes) debug: 274.434: gizmo.dofile(ixeg.733.fmc.cruise.lua.aes) debug: 274.435: gizmo.dofile(ixeg.733.fmc.menu.lua.aes) debug: 274.436: gizmo.dofile(ixeg.733.fmc.duplicates.lua.aes) debug: 274.437: gizmo.dofile(ixeg.733.fmc.prefs.lua.aes) debug: 274.437: gizmo.dofile(ixeg.733.autopilot.lua.aes) debug: 274.445: gizmo.dofile(ixeg.733.autothrottle.lua.aes) debug: 274.448: gizmo.dofile(ixeg.733.ehsi.main.lua.aes) debug: 274.460: gizmo.dofile(ixeg.733.ehsi.parts.lua.aes) debug: 274.461: gizmo.dofile(ixeg.733.wx.main.lua.aes) debug: 274.478: gizmo.dofile(ixeg.733.draw_route.lua.aes) debug: 274.483: gizmo.dofile(ixeg.733.audiopanel.lua.aes) debug: 274.501: gizmo.dofile(ixeg.733.vortex.lua.aes) debug: 274.504: gizmo.dofile(ixeg.733.draw_fan.lua.aes) debug: 274.505: gizmo.dofile(ixeg.733.tips.lua.aes) debug: 274.572: Script: OnKickStart: Finished. debug: 274.573: INIT SYSTEMS debug: 441.437: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 441.444: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 441.473: Firmware v15.12.22.1106 warng: 441.476: GUI Read Key Protection Applied. debug: 441.480: X-Plugins OBJ8 Loader v15.01.11 debug: 441.482: * gxt.refresh().. debug: 441.486: gxt: AutoLoading.. debug: 441.487: gxt.load: Console debug: 441.488: gxt.load: ToolTray debug: 441.489: gxt.load: HotFix debug: 441.490: gxt.load: Mute debug: 441.491: gxt.load: Preferences debug: 441.492: gxt.load: RebootButton debug: 441.493: gxt.load: MAXX_RWC debug: 441.493: gxt.load: XA_Activation debug: 441.502: gxt.load: Shell debug: 441.503: gxt: Completed AutoLoad. debug: 441.503: Script: OnKickStart debug: 441.504: Found scripts/init.lua.aes debug: 441.504: gizmo.dofile(init.lua.aes) debug: 441.506: gizmo.dofile(ixeg_manip_utils.lua.aes) debug: 441.507: gizmo.dofile(ixeg.733.utils.lua.aes) debug: 441.508: gizmo.dofile(xscenery_sounds.lua.aes) debug: 441.509: gizmo.dofile(ixeg.733.sounds.lua.aes) debug: 441.623: gizmo.dofile(ixeg.733.electrical.lua.aes) debug: 441.627: gizmo.dofile(ixeg.733.annunciators.lua.aes) debug: 441.628: gizmo.dofile(ixeg.733.lighting.lua.aes) debug: 441.631: gizmo.dofile(ixeg.733.common_datarefs.lua.aes) debug: 441.635: gizmo.dofile(ixeg.733.config.lua.aes) debug: 441.636: Loaded IXEG preferences. debug: 441.636: gizmo.dofile(ixeg.733.electrical.indicators.lua.aes) debug: 441.638: gizmo.dofile(ixeg.733.misc.lua.aes) debug: 441.684: gizmo.dofile(ixeg.733.masi.lua.aes) debug: 441.688: gizmo.dofile(ixeg.733.fm.fusecd.lua.aes) debug: 441.689: gizmo.dofile(ixeg.733.fm.thrust.lua.aes) debug: 441.689: gizmo.dofile(ixeg.733.eadi.datarefs.lua.aes) debug: 441.691: gizmo.dofile(ixeg.733.bleedair.variables.lua.aes) debug: 441.692: gizmo.dofile(ixeg.733.bleedair.logic.lua.aes) debug: 441.693: gizmo.dofile(ixeg.733.pressurization.logic.lua.aes) debug: 441.697: gizmo.dofile(ixeg.733.aircond.lua.aes) debug: 441.701: gizmo.dofile(ixeg.733.apu.lua.aes) debug: 441.702: gizmo.dofile(ixeg.733.irs.lua.aes) debug: 441.707: gizmo.dofile(ixeg.733.eadi.drawutils.lua.aes) debug: 441.707: gizmo.dofile(ixeg.733.eadi.main.lua.aes) debug: 441.717: gizmo.dofile(ixeg.733.eadi.misc.lua.aes) debug: 441.719: gizmo.dofile(ixeg.733.camera.main.lua.aes) debug: 441.720: gizmo.dofile(ixeg.733.camera.control.lua.aes) debug: 441.720: gizmo.dofile(ixeg.733.hydraulics.lua.aes) debug: 441.731: gizmo.dofile(ixeg.733.fm.flaps.lua.aes) debug: 441.733: gizmo.dofile(ixeg.733.altimeters.lua.aes) debug: 441.735: gizmo.dofile(ixeg.733.groundmodel.lua.aes) debug: 441.737: gizmo.dofile(ixeg.733.engine.starter.lua.aes) debug: 441.738: gizmo.dofile(ixeg.733.clocks.lua.aes) debug: 441.740: gizmo.dofile(ixeg.733.mcp.lua.aes) debug: 441.746: gizmo.dofile(ixeg.733.lcds.lua.aes) debug: 441.748: gizmo.dofile(ixeg.733.firewarning.lua.aes) debug: 441.752: gizmo.dofile(ixeg.733.fuel.lua.aes) debug: 441.756: gizmo.dofile(ixeg.733.ecam.main.lua.aes) debug: 441.762: gizmo.dofile(ixeg.733.gui.lua.aes) debug: 441.786: gizmo.dofile(ixeg.733.gui.preflight.lua.aes) debug: 441.787: gizmo.dofile(ixeg.733.gui.prefs.lua.aes) debug: 441.788: gizmo.dofile(ixeg.733.gui.failures.lua.aes) debug: 441.791: gizmo.dofile(ixeg.733.gui.views.lua.aes) debug: 441.792: gizmo.dofile(ixeg.733.windscreen_effects.lua.aes) debug: 441.793: gizmo.dofile(ixeg.733.antiice.lua.aes) debug: 441.797: gizmo.dofile(ixeg.733.gearhandle.lua.aes) debug: 441.799: gizmo.dofile(ixeg.733.radios.lua.aes) debug: 441.807: gizmo.dofile(ixeg.733.fmc.assets.lua.aes) debug: 441.825: gizmo.dofile(ixeg.733.fmc.gui.lua.aes) debug: 441.833: gizmo.dofile(ixeg.733.fmc.ident.lua.aes) debug: 441.834: gizmo.dofile(ixeg.733.fmc.pos_init.lua.aes) debug: 441.835: gizmo.dofile(ixeg.733.fmc.route.lua.aes) debug: 441.837: gizmo.dofile(ixeg.733.fmc.alt_dest.lua.aes) debug: 441.837: gizmo.dofile(ixeg.733.fmc.legs.lua.aes) debug: 441.838: gizmo.dofile(ixeg.733.fmc.hold.lua.aes) debug: 441.839: gizmo.dofile(ixeg.733.fmc.fix.lua.aes) debug: 441.840: gizmo.dofile(ixeg.733.fmc.prog.lua.aes) debug: 441.841: gizmo.dofile(ixeg.733.fmc.deparr.lua.aes) debug: 441.841: gizmo.dofile(ixeg.733.fmc.departures.lua.aes) debug: 441.842: gizmo.dofile(ixeg.733.fmc.arrivals.lua.aes) debug: 441.844: gizmo.dofile(ixeg.733.fmc.n1_limits.lua.aes) debug: 441.845: gizmo.dofile(ixeg.733.fmc.perf_init.lua.aes) debug: 441.846: gizmo.dofile(ixeg.733.fmc.takeoff.lua.aes) debug: 441.847: gizmo.dofile(ixeg.733.fmc.approach.lua.aes) debug: 441.848: gizmo.dofile(ixeg.733.fmc.vnav.lua.aes) debug: 441.850: gizmo.dofile(ixeg.733.fmc.climb.lua.aes) debug: 441.851: gizmo.dofile(ixeg.733.fmc.descent.lua.aes) debug: 441.852: gizmo.dofile(ixeg.733.fmc.cruise.lua.aes) debug: 441.853: gizmo.dofile(ixeg.733.fmc.menu.lua.aes) debug: 441.854: gizmo.dofile(ixeg.733.fmc.duplicates.lua.aes) debug: 441.855: gizmo.dofile(ixeg.733.fmc.prefs.lua.aes) debug: 441.855: gizmo.dofile(ixeg.733.autopilot.lua.aes) debug: 441.864: gizmo.dofile(ixeg.733.autothrottle.lua.aes) debug: 441.867: gizmo.dofile(ixeg.733.ehsi.main.lua.aes) debug: 441.884: gizmo.dofile(ixeg.733.ehsi.parts.lua.aes) debug: 441.886: gizmo.dofile(ixeg.733.wx.main.lua.aes) debug: 441.911: gizmo.dofile(ixeg.733.draw_route.lua.aes) debug: 441.915: gizmo.dofile(ixeg.733.audiopanel.lua.aes) debug: 441.933: gizmo.dofile(ixeg.733.vortex.lua.aes) debug: 441.936: gizmo.dofile(ixeg.733.draw_fan.lua.aes) debug: 441.937: gizmo.dofile(ixeg.733.tips.lua.aes) debug: 442.010: Script: OnKickStart: Finished. debug: 457.165: INIT SYSTEMS debug: 457.203: --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- -- - -- --- debug: 457.223: Firmware v15.12.22.1106 warng: 457.226: GUI Read Key Protection Applied. debug: 457.232: X-Plugins OBJ8 Loader v15.01.11 debug: 457.233: * gxt.refresh().. debug: 457.238: gxt: AutoLoading.. debug: 457.239: gxt.load: Console debug: 457.239: gxt.load: ToolTray debug: 457.240: gxt.load: HotFix debug: 457.241: gxt.load: Mute debug: 457.242: gxt.load: Preferences debug: 457.242: gxt.load: RebootButton debug: 457.243: gxt.load: MAXX_RWC debug: 457.244: gxt.load: XA_Activation debug: 457.252: gxt.load: Shell debug: 457.253: gxt: Completed AutoLoad. debug: 457.254: Script: OnKickStart debug: 457.254: Found scripts/init.lua.aes debug: 457.255: gizmo.dofile(init.lua.aes) debug: 457.256: gizmo.dofile(ixeg_manip_utils.lua.aes) debug: 457.257: gizmo.dofile(ixeg.733.utils.lua.aes) debug: 457.258: gizmo.dofile(xscenery_sounds.lua.aes) debug: 457.259: gizmo.dofile(ixeg.733.sounds.lua.aes) debug: 457.371: gizmo.dofile(ixeg.733.electrical.lua.aes) debug: 457.375: gizmo.dofile(ixeg.733.annunciators.lua.aes) debug: 457.376: gizmo.dofile(ixeg.733.lighting.lua.aes) debug: 457.379: gizmo.dofile(ixeg.733.common_datarefs.lua.aes) debug: 457.383: gizmo.dofile(ixeg.733.config.lua.aes) debug: 457.384: Loaded IXEG preferences. debug: 457.385: gizmo.dofile(ixeg.733.electrical.indicators.lua.aes) debug: 457.386: gizmo.dofile(ixeg.733.misc.lua.aes) debug: 457.432: gizmo.dofile(ixeg.733.masi.lua.aes) debug: 457.435: gizmo.dofile(ixeg.733.fm.fusecd.lua.aes) debug: 457.436: gizmo.dofile(ixeg.733.fm.thrust.lua.aes) debug: 457.437: gizmo.dofile(ixeg.733.eadi.datarefs.lua.aes) debug: 457.438: gizmo.dofile(ixeg.733.bleedair.variables.lua.aes) debug: 457.440: gizmo.dofile(ixeg.733.bleedair.logic.lua.aes) debug: 457.441: gizmo.dofile(ixeg.733.pressurization.logic.lua.aes) debug: 457.444: gizmo.dofile(ixeg.733.aircond.lua.aes) debug: 457.447: gizmo.dofile(ixeg.733.apu.lua.aes) debug: 457.449: gizmo.dofile(ixeg.733.irs.lua.aes) debug: 457.454: gizmo.dofile(ixeg.733.eadi.drawutils.lua.aes) debug: 457.454: gizmo.dofile(ixeg.733.eadi.main.lua.aes) debug: 457.463: gizmo.dofile(ixeg.733.eadi.misc.lua.aes) debug: 457.464: gizmo.dofile(ixeg.733.camera.main.lua.aes) debug: 457.465: gizmo.dofile(ixeg.733.camera.control.lua.aes) debug: 457.466: gizmo.dofile(ixeg.733.hydraulics.lua.aes) debug: 457.476: gizmo.dofile(ixeg.733.fm.flaps.lua.aes) debug: 457.478: gizmo.dofile(ixeg.733.altimeters.lua.aes) debug: 457.481: gizmo.dofile(ixeg.733.groundmodel.lua.aes) debug: 457.482: gizmo.dofile(ixeg.733.engine.starter.lua.aes) debug: 457.484: gizmo.dofile(ixeg.733.clocks.lua.aes) debug: 457.486: gizmo.dofile(ixeg.733.mcp.lua.aes) debug: 457.492: gizmo.dofile(ixeg.733.lcds.lua.aes) debug: 457.494: gizmo.dofile(ixeg.733.firewarning.lua.aes) debug: 457.498: gizmo.dofile(ixeg.733.fuel.lua.aes) debug: 457.502: gizmo.dofile(ixeg.733.ecam.main.lua.aes) debug: 457.508: gizmo.dofile(ixeg.733.gui.lua.aes) debug: 457.530: gizmo.dofile(ixeg.733.gui.preflight.lua.aes) debug: 457.531: gizmo.dofile(ixeg.733.gui.prefs.lua.aes) debug: 457.533: gizmo.dofile(ixeg.733.gui.failures.lua.aes) debug: 457.537: gizmo.dofile(ixeg.733.gui.views.lua.aes) debug: 457.538: gizmo.dofile(ixeg.733.windscreen_effects.lua.aes) debug: 457.539: gizmo.dofile(ixeg.733.antiice.lua.aes) debug: 457.545: gizmo.dofile(ixeg.733.gearhandle.lua.aes) debug: 457.546: gizmo.dofile(ixeg.733.radios.lua.aes) debug: 457.555: gizmo.dofile(ixeg.733.fmc.assets.lua.aes) debug: 457.574: gizmo.dofile(ixeg.733.fmc.gui.lua.aes) debug: 457.582: gizmo.dofile(ixeg.733.fmc.ident.lua.aes) debug: 457.583: gizmo.dofile(ixeg.733.fmc.pos_init.lua.aes) debug: 457.583: gizmo.dofile(ixeg.733.fmc.route.lua.aes) debug: 457.585: gizmo.dofile(ixeg.733.fmc.alt_dest.lua.aes) debug: 457.586: gizmo.dofile(ixeg.733.fmc.legs.lua.aes) debug: 457.587: gizmo.dofile(ixeg.733.fmc.hold.lua.aes) debug: 457.587: gizmo.dofile(ixeg.733.fmc.fix.lua.aes) debug: 457.588: gizmo.dofile(ixeg.733.fmc.prog.lua.aes) debug: 457.589: gizmo.dofile(ixeg.733.fmc.deparr.lua.aes) debug: 457.590: gizmo.dofile(ixeg.733.fmc.departures.lua.aes) debug: 457.591: gizmo.dofile(ixeg.733.fmc.arrivals.lua.aes) debug: 457.592: gizmo.dofile(ixeg.733.fmc.n1_limits.lua.aes) debug: 457.593: gizmo.dofile(ixeg.733.fmc.perf_init.lua.aes) debug: 457.595: gizmo.dofile(ixeg.733.fmc.takeoff.lua.aes) debug: 457.595: gizmo.dofile(ixeg.733.fmc.approach.lua.aes) debug: 457.596: gizmo.dofile(ixeg.733.fmc.vnav.lua.aes) debug: 457.599: gizmo.dofile(ixeg.733.fmc.climb.lua.aes) debug: 457.600: gizmo.dofile(ixeg.733.fmc.descent.lua.aes) debug: 457.601: gizmo.dofile(ixeg.733.fmc.cruise.lua.aes) debug: 457.602: gizmo.dofile(ixeg.733.fmc.menu.lua.aes) debug: 457.603: gizmo.dofile(ixeg.733.fmc.duplicates.lua.aes) debug: 457.603: gizmo.dofile(ixeg.733.fmc.prefs.lua.aes) debug: 457.604: gizmo.dofile(ixeg.733.autopilot.lua.aes) debug: 457.612: gizmo.dofile(ixeg.733.autothrottle.lua.aes) debug: 457.615: gizmo.dofile(ixeg.733.ehsi.main.lua.aes) debug: 457.626: gizmo.dofile(ixeg.733.ehsi.parts.lua.aes) debug: 457.628: gizmo.dofile(ixeg.733.wx.main.lua.aes) debug: 457.640: gizmo.dofile(ixeg.733.draw_route.lua.aes) debug: 457.643: gizmo.dofile(ixeg.733.audiopanel.lua.aes) debug: 457.659: gizmo.dofile(ixeg.733.vortex.lua.aes) debug: 457.662: gizmo.dofile(ixeg.733.draw_fan.lua.aes) debug: 457.664: gizmo.dofile(ixeg.733.tips.lua.aes) debug: 457.730: Script: OnKickStart: Finished. debug: 457.731: INIT SYSTEMS debug: 558.652: TK: Processing active route debug: 558.653: TK: building routelist from: 0points debug: 558.653: TK: no points to process debug: 558.653: TK: Exiting fmc.processActive() debug: 561.274: TK: Processing active route debug: 561.274: TK: building routelist from: 0points debug: 561.275: TK: no points to process debug: 561.275: TK: Exiting fmc.processActive() debug: 564.375: TK: Processing active route debug: 564.376: TK: building routelist from: 0points debug: 564.376: TK: no points to process debug: 564.377: TK: Exiting fmc.processActive() debug: 646.919: TK: entering runway debug: 658.478: TK: Looking for coroute SAEZSAZM debug: 658.479: TK: Building list of all files in coroute folder debug: 658.480: TK: iterating 6 files for coroute: saezsazm debug: 658.480: TK: Found matching coroute name with file extension: fpl debug: 658.481: TK: Parsing .fpl file debug: 658.481: TK: opened fpl file OK debug: 658.482: TK: saezsazm debug: 658.482: TK: SAEZ R182J UW29 MDP SAZM debug: 658.483: TK: SAEZ debug: 658.483: TK: sid debug: 658.483: TK: R182J debug: 658.484: TK: UW29 debug: 658.484: TK: MDP debug: 658.484: TK: star debug: 658.485: TK: SAZM debug: 658.485: TK: Departure airport is: SAEZ debug: 658.486: TK: Arrival airport is: SAZM debug: 658.486: TK: Attempting to process the coroute table debug: 658.486: TK: Loading Company route: saezsazm debug: 658.542: TK: Successful Arrival airport match, SAZM loading procedures into arrA debug: 658.575: TK: ==================================================================================================== debug: 658.576: TK: ADDING THE COROUTE debug: 658.576: TK: ==================================================================================================== debug: 658.577: TK: There is a route to process debug: 658.577: TK: Via is: direct debug: 658.577: TK: adding a Direct point to: R182J debug: 658.581: TK: Via is: UW29 debug: 658.650: TK: airway found! debug: 658.651: TK: could not find begin/end indicies debug: 658.651: TK: Processing active route debug: 658.652: TK: PROCESS ACTIVE calling process_route(1) debug: 658.652: TK: ==================================================================================================== debug: 658.653: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 658.653: TK: ==================================================================================================== debug: 658.653: TK: BEGIN: Adding begin point to the source route debug: 658.654: TK: No origin rwy debug: 658.654: TK: END: Adding begin point to the waypoint table. debug: 658.655: TK: Pre-processing conditionals for LL debug: 658.655: TK: Done preprocessing conditionals for LL debug: 658.655: TK: Beginning auto-close/disco processing debug: 658.656: TK: Begin debug: 658.656: TK: done iterating for auto-close debug: 658.657: TK: Checking for Autoclose debug: 658.657: TK: Exiting autoclose() debug: 658.658: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 658.658: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 658.658: TK: Evaluating flyover for first point. debug: 658.659: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 658.659: TK: Turn to next is to the right debug: 658.659: TK: Centerpoint for turn is: -58.559876345544 | -34.830635434944 debug: 658.660: TK: Next waypoint is outside the turn radius...continuing eval debug: 658.660: TK: Current heading is 156.90551942424 debug: 658.661: TK: Bearing to next is 174.88902848796 debug: 658.661: TK: Heading Change to next waypoint is: 17.983509063721 degrees debug: 658.661: TK: entering focusturn from debug: 658.662: TK: function focusturn() begin. 6 arguments passed debug: 658.662: TK: Calculating right turn debug: 658.663: TK: Done calculating focus turn. 9 points added to the lah table debug: 658.664: TK: Tru course after focus turn is: 175.28219957073 debug: 658.665: TK: ================================================================================PROCESSING POINT 2, R182J== LNAV debug: 658.665: TK: This is the last point debug: 658.666: TK: building routelist from: 2points debug: 658.666: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 658.668: TK: EXITING PROCESS ROUTE FUNCTION debug: 658.669: TK: ==================================================================================================== debug: 658.669: TK: Exiting fmc.processActive() debug: 658.670: TK: done adding the routes 2 points added to the mod route debug: 658.670: TK: Done adding coroute stuff debug: 676.745: TK: EXEC pressed debug: 676.746: TK: ==================================================================================================== debug: 676.747: TK: BEGIN PROCESSING VNAV debug: 676.747: TK: ==================================================================================================== debug: 676.747: TK: Cruise altitude is set to: 33000 debug: 676.748: TK: Current altitude is: 50.752403259277 debug: 676.748: TK: ==================================================================================================== debug: 676.749: TK: PROCESSING DESCENT FUNCTION debug: 676.749: TK: ==================================================================================================== debug: 676.750: TK: No suitable E/D point found debug: 676.750: TK: ==================================================================================================== debug: 676.751: TK: PROCESSING CLIMB FUNCTION debug: 676.751: TK: ==================================================================================================== debug: 676.752: TK: Distance to 1500' AGL is estimated at: 4.2 NM debug: 676.752: TK: Starting elevation is: 50.752403259277 debug: 676.753: TK: Cruise altitude is: 33000 debug: 676.753: TK: Assembling the restriction tables debug: 676.754: TK: Restriction tables built: debug: 676.754: TK: Calculating dist2 and distFrom fields for restrictions debug: 676.754: TK: Duplicating altitude restrictions to the fmc.mod_restrictions.ap_climb table debug: 676.755: TK: ---------------------------------------------------------------------------------------------------- debug: 676.755: TK: VNAV CLIMB - Processing Point: [2] R182J debug: 676.756: TK: ---------------------------------------------------------------------------------------------------- debug: 676.756: TK: Current alt before iteration is: 51 debug: 676.757: TK: most restrictive target alt at R182J is 38000 debug: 676.757: TK: This WP is out of the takeoff phase debug: 676.758: TK: Able altitude this waypoint is: 5485 debug: 676.758: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 676.758: TK: We are not going over 10000' during this iteration debug: 676.759: TK: evaluating crossover criteria, currentAlt = 5485.1138948542 debug: 676.759: TK: crossover criteria not met debug: 676.760: TK: unable cruise altitude, end of route scenario debug: 676.760: TK: Calling process_enroute() debug: 676.761: TK: ==================================================================================================== debug: 676.761: TK: PROCESSING ENROUTE FUNCTION debug: 676.761: TK: ==================================================================================================== debug: 676.762: TK: TOC not reached, no enroute to process debug: 676.762: TK: about to draw green circles debug: 676.763: TK: DONE PROCESSING VNAV debug: 676.763: TK: ==================================================================================================== debug: 676.764: TK: VNAV calling process_route(1) debug: 676.764: TK: ==================================================================================================== debug: 676.764: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 676.765: TK: ==================================================================================================== debug: 676.765: TK: BEGIN: Adding begin point to the source route debug: 676.765: TK: No origin rwy debug: 676.766: TK: END: Adding begin point to the waypoint table. debug: 676.766: TK: Pre-processing conditionals for LL debug: 676.766: TK: Done preprocessing conditionals for LL debug: 676.767: TK: Beginning auto-close/disco processing debug: 676.767: TK: Begin debug: 676.767: TK: done iterating for auto-close debug: 676.768: TK: Checking for Autoclose debug: 676.768: TK: Exiting autoclose() debug: 676.769: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 676.769: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 676.769: TK: Evaluating flyover for first point. debug: 676.770: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 676.770: TK: Turn to next is to the right debug: 676.770: TK: Centerpoint for turn is: -58.559876345544 | -34.830635434944 debug: 676.771: TK: Next waypoint is outside the turn radius...continuing eval debug: 676.771: TK: Current heading is 156.90551942424 debug: 676.771: TK: Bearing to next is 174.88902848796 debug: 676.772: TK: Heading Change to next waypoint is: 17.983509063721 degrees debug: 676.772: TK: entering focusturn from debug: 676.773: TK: function focusturn() begin. 6 arguments passed debug: 676.773: TK: Calculating right turn debug: 676.773: TK: Done calculating focus turn. 9 points added to the lah table debug: 676.774: TK: Tru course after focus turn is: 175.28219957073 debug: 676.774: TK: ================================================================================PROCESSING POINT 2, R182J== LNAV debug: 676.775: TK: This is the last point debug: 676.775: TK: building routelist from: 2points debug: 676.775: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 676.776: TK: EXITING PROCESS ROUTE FUNCTION debug: 676.776: TK: ==================================================================================================== debug: 676.777: TK: Setting Altitude Target debug: 676.777: TK: Setting speed target debug: 676.778: TK: winning target speed is: debug: 676.778: TK: 250 debug: 676.779: TK: Route Data Exported debug: 676.780: TK: exiting the EXEC function debug: 682.286: TK: processing runway selection debug: 682.286: TK: isolating selected runway debug: 682.287: TK: building departure debug: 682.288: TK: iterating depA.sids, looking for sids that match the selected name debug: 682.288: TK: Burning the departure into the mod table debug: 682.288: TK: Burning Procedure sid debug: 682.289: TK: Exiting fmc.burn_procedure debug: 682.289: TK: Burning Procedure sidt debug: 682.290: TK: Exiting fmc.burn_procedure debug: 682.290: TK: filtering SID list debug: 682.291: TK: Processing active route debug: 682.291: TK: PROCESS ACTIVE calling process_route(1) debug: 682.291: TK: ==================================================================================================== debug: 682.292: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 682.292: TK: ==================================================================================================== debug: 682.293: TK: BEGIN: Adding begin point to the source route debug: 682.293: TK: Origin runway exists debug: 682.294: TK: END: Adding begin point to the waypoint table. debug: 682.294: TK: Pre-processing conditionals for LL debug: 682.294: TK: Done preprocessing conditionals for LL debug: 682.295: TK: Beginning auto-close/disco processing debug: 682.295: TK: Begin debug: 682.296: TK: done iterating for auto-close debug: 682.296: TK: Checking for Autoclose debug: 682.297: TK: Exiting autoclose() debug: 682.297: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 682.297: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 682.298: TK: Evaluating flyover for first point. debug: 682.298: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 682.299: TK: Turn to next is to the right debug: 682.299: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 682.299: TK: Next waypoint is outside the turn radius...continuing eval debug: 682.300: TK: Current heading is 100.00824546814 debug: 682.300: TK: Bearing to next is 176.10195346679 debug: 682.300: TK: Heading Change to next waypoint is: 76.093707998652 degrees debug: 682.301: TK: entering focusturn from debug: 682.301: TK: function focusturn() begin. 6 arguments passed debug: 682.302: TK: Calculating right turn debug: 682.302: TK: Done calculating focus turn. 35 points added to the lah table debug: 682.303: TK: Tru course after focus turn is: 182.94982560908 debug: 682.303: TK: ================================================================================PROCESSING POINT 2, R182J== LNAV debug: 682.304: TK: This is the last point debug: 682.304: TK: building routelist from: 2points debug: 682.304: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 682.305: TK: EXITING PROCESS ROUTE FUNCTION debug: 682.305: TK: ==================================================================================================== debug: 682.306: TK: PROCESS ACTIVE calling process_route() debug: 682.306: TK: ==================================================================================================== debug: 682.307: TK: BEGIN PROCESSING VNAV debug: 682.307: TK: ==================================================================================================== debug: 682.307: TK: Cruise altitude is set to: 33000 debug: 682.308: TK: Current altitude is: 50.75220489502 debug: 682.308: TK: ==================================================================================================== debug: 682.309: TK: PROCESSING DESCENT FUNCTION debug: 682.309: TK: ==================================================================================================== debug: 682.309: TK: No suitable E/D point found debug: 682.310: TK: ==================================================================================================== debug: 682.310: TK: PROCESSING CLIMB FUNCTION debug: 682.311: TK: ==================================================================================================== debug: 682.311: TK: Distance to 1500' AGL is estimated at: 4.2 NM debug: 682.311: TK: Starting elevation is: 62 debug: 682.312: TK: Cruise altitude is: 33000 debug: 682.312: TK: Assembling the restriction tables debug: 682.313: TK: Restriction tables built: debug: 682.313: TK: Calculating dist2 and distFrom fields for restrictions debug: 682.314: TK: Duplicating altitude restrictions to the fmc.mod_restrictions.ap_climb table debug: 682.314: TK: ---------------------------------------------------------------------------------------------------- debug: 682.315: TK: VNAV CLIMB - Processing Point: [2] R182J debug: 682.315: TK: ---------------------------------------------------------------------------------------------------- debug: 682.315: TK: Current alt before iteration is: 112 debug: 682.316: TK: most restrictive target alt at R182J is 38000 debug: 682.316: TK: This WP is out of the takeoff phase debug: 682.317: TK: Able altitude this waypoint is: 5188 debug: 682.317: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 682.317: TK: We are not going over 10000' during this iteration debug: 682.318: TK: evaluating crossover criteria, currentAlt = 5188.1307749432 debug: 682.318: TK: crossover criteria not met debug: 682.318: TK: unable cruise altitude, end of route scenario debug: 682.319: TK: Calling process_enroute() debug: 682.319: TK: ==================================================================================================== debug: 682.319: TK: PROCESSING ENROUTE FUNCTION debug: 682.320: TK: ==================================================================================================== debug: 682.320: TK: TOC not reached, no enroute to process debug: 682.321: TK: about to draw green circles debug: 682.321: TK: DONE PROCESSING VNAV debug: 682.322: TK: ==================================================================================================== debug: 682.322: TK: VNAV calling process_route(1) debug: 682.323: TK: ==================================================================================================== debug: 682.323: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 682.323: TK: ==================================================================================================== debug: 682.324: TK: BEGIN: Adding begin point to the source route debug: 682.324: TK: Origin runway exists debug: 682.325: TK: END: Adding begin point to the waypoint table. debug: 682.325: TK: Pre-processing conditionals for LL debug: 682.326: TK: Done preprocessing conditionals for LL debug: 682.326: TK: Beginning auto-close/disco processing debug: 682.327: TK: Begin debug: 682.327: TK: done iterating for auto-close debug: 682.327: TK: Checking for Autoclose debug: 682.328: TK: Exiting autoclose() debug: 682.328: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 682.329: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 682.330: TK: Evaluating flyover for first point. debug: 682.330: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 682.330: TK: Turn to next is to the right debug: 682.331: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 682.331: TK: Next waypoint is outside the turn radius...continuing eval debug: 682.332: TK: Current heading is 100.00824546814 debug: 682.332: TK: Bearing to next is 176.10195346679 debug: 682.333: TK: Heading Change to next waypoint is: 76.093707998652 degrees debug: 682.333: TK: entering focusturn from debug: 682.333: TK: function focusturn() begin. 6 arguments passed debug: 682.334: TK: Calculating right turn debug: 682.334: TK: Done calculating focus turn. 35 points added to the lah table debug: 682.335: TK: Tru course after focus turn is: 182.94982560908 debug: 682.335: TK: ================================================================================PROCESSING POINT 2, R182J== LNAV debug: 682.335: TK: This is the last point debug: 682.336: TK: building routelist from: 2points debug: 682.336: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 682.337: TK: EXITING PROCESS ROUTE FUNCTION debug: 682.337: TK: ==================================================================================================== debug: 682.338: TK: EXITING PROCESS ROUTE FUNCTION debug: 682.338: TK: ==================================================================================================== debug: 682.338: TK: Exiting fmc.processActive() debug: 688.628: TK: process LSK 3 from CDU # 1 debug: 688.629: TK: Selected SID: GBE6 no transition selected yet debug: 688.629: TK: building departure debug: 688.630: TK: checking for autoselect debug: 688.630: TK: No autoselect this time debug: 688.631: TK: iterating depA.sids, looking for sids that match the selected name debug: 688.632: TK: we Matched GBE6, looking at runways now debug: 688.632: TK: No comma formatting, but found 1:1 relation for runway: 11 debug: 688.633: TK: Burning the departure into the mod table debug: 688.633: TK: Burning Procedure sid debug: 688.634: TK: The num points currently existing for type sid is 0 debug: 688.634: TK: Begin and End indexes are: 0 and 0 debug: 688.635: TK: FUNCTION IN: fmc.append_procedure. Appending sid. insertIndex is: 1 debug: 688.635: TK: There are 6 points to append debug: 688.636: TK: FUNCTION OUT: fmc.append_procedure debug: 688.636: TK: Exiting fmc.burn_procedure debug: 688.637: TK: Burning Procedure sidt debug: 688.637: TK: Exiting fmc.burn_procedure debug: 688.638: TK: Processing active route debug: 688.638: TK: PROCESS ACTIVE calling process_route(1) debug: 688.638: TK: ==================================================================================================== debug: 688.639: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 688.639: TK: ==================================================================================================== debug: 688.640: TK: BEGIN: Adding begin point to the source route debug: 688.640: TK: Origin runway exists debug: 688.641: TK: END: Adding begin point to the waypoint table. debug: 688.641: TK: Pre-processing conditionals for LL debug: 688.641: TK: Calculating turn direction from Begin tc1: 100.00824546814 to (467) tc2: 101.00824546814 debug: 688.642: TK: Done preprocessing conditionals for LL debug: 688.642: TK: Beginning auto-close/disco processing debug: 688.643: TK: Begin debug: 688.643: TK: done iterating for auto-close debug: 688.644: TK: Checking for Autoclose debug: 688.644: TK: Exiting autoclose() debug: 688.645: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 688.645: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 688.646: TK: Evaluating flyover for first point. debug: 688.646: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 688.647: TK: Turn to next is to the right debug: 688.647: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 688.648: TK: Next waypoint is outside the turn radius...continuing eval debug: 688.648: TK: Current heading is 100.00824546814 debug: 688.649: TK: Bearing to next is 101.00824546817 debug: 688.649: TK: Heading Change to next waypoint is: 1.0000000000335 degrees debug: 688.649: TK: No change made to route because of small course change, dontcha know debug: 688.650: TK: ================================================================================PROCESSING POINT 2, (467)== LNAV debug: 688.650: TK: BEGIN: Calculating Flyby params debug: 688.650: TK: Function was passed: 2 arguments debug: 688.651: TK: -58.531460400452 | -34.822234166645 | -58.522030968444 | -34.823739606486 | -58.465000 | -34.857500 debug: 688.651: TK: tc: 101.00824546817 tc2: 125.81750320488 debug: 688.652: TK: Turn direction is: 1 debug: 688.652: TK: Flyby evaluated to OK, calculating turn debug: 688.652: TK: turnpt lon/lat is -58.527675063319 | -34.822838602184 debug: 688.653: TK: SWEEP TURN: Lon: -58.527675063319 |Lat: -34.822838602184 |From: 101.00608390262 |To:125.81750320488 | Turning: 1 debug: 688.653: TK: Adding 9 segments to lah debug: 688.653: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 688.654: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.654: TK: Eval flyby processing done debug: 688.655: TK: appending ehsi.mod_route debug: 688.655: TK: ================================================================================PROCESSING POINT 3, EZE12== LNAV debug: 688.655: TK: BEGIN: Calculating Flyby params debug: 688.656: TK: Function was passed: 2 arguments debug: 688.656: TK: -58.517370599043 | -34.826500426867 | -58.465000 | -34.857500 | -58.398374 | -34.947185 debug: 688.656: TK: tc: 125.81483979937 tc2: 148.66659030593 debug: 688.657: TK: Turn direction is: 1 debug: 688.657: TK: Flyby evaluated to OK, calculating turn debug: 688.657: TK: turnpt lon/lat is -58.46929241003 | -34.854960929249 debug: 688.658: TK: SWEEP TURN: Lon: -58.46929241003 |Lat: -34.854960929249 |From: 125.78737286433 |To:148.66659030593 | Turning: 1 debug: 688.658: TK: Adding 9 segments to lah debug: 688.658: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 688.659: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.659: TK: Eval flyby processing done debug: 688.659: TK: appending ehsi.mod_route debug: 688.660: TK: ================================================================================PROCESSING POINT 4, D138J== LNAV debug: 688.660: TK: BEGIN: Calculating Flyby params debug: 688.660: TK: Function was passed: 2 arguments debug: 688.661: TK: -58.462250878773 | -34.861205179621 | -58.398374 | -34.947185 | -58.453656 | -34.976678 debug: 688.661: TK: tc: 148.66501793932 tc2: 236.92077220695 debug: 688.661: TK: Turn direction is: 1 debug: 688.662: TK: Flyby evaluated to OK, calculating turn debug: 688.662: TK: turnpt lon/lat is -58.411597359648 | -34.929403557494 debug: 688.663: TK: SWEEP TURN: Lon: -58.411597359648 |Lat: -34.929403557494 |From: 148.63604013576 |To:236.92077220695 | Turning: 1 debug: 688.663: TK: Adding 35 segments to lah debug: 688.663: TK: END: Calculating sweep turn. 35 segments added to the turn debug: 688.664: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.664: TK: Eval flyby processing done debug: 688.665: TK: appending ehsi.mod_route debug: 688.665: TK: ================================================================================PROCESSING POINT 5, D156J== LNAV debug: 688.665: TK: BEGIN: Calculating Flyby params debug: 688.666: TK: Function was passed: 2 arguments debug: 688.666: TK: -58.419657626743 | -34.958545291123 | -58.453656 | -34.976678 | -58.517478 | -34.990347 debug: 688.666: TK: tc: 236.93293212442 tc2: 255.33209760753 debug: 688.667: TK: Turn direction is: 1 debug: 688.667: TK: Flyby evaluated to OK, calculating turn debug: 688.668: TK: turnpt lon/lat is -58.450105208044 | -34.974785037326 debug: 688.668: TK: SWEEP TURN: Lon: -58.450105208044 |Lat: -34.974785037326 |From: 236.95038162625 |To:255.33209760753 | Turning: 1 debug: 688.669: TK: Adding 7 segments to lah debug: 688.669: TK: END: Calculating sweep turn. 7 segments added to the turn debug: 688.669: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.670: TK: Eval flyby processing done debug: 688.670: TK: appending ehsi.mod_route debug: 688.670: TK: ================================================================================PROCESSING POINT 6, R182J== LNAV debug: 688.671: TK: BEGIN: Calculating Flyby params debug: 688.671: TK: Function was passed: 2 arguments debug: 688.672: TK: -58.457751477956 | -34.977556282792 | -58.517478 | -34.990347 | -58.464722 | -35.750833 debug: 688.672: TK: tc: 255.33444411964 tc2: 176.77763420317 debug: 688.672: TK: Turn direction is: -1 debug: 688.672: TK: Flyby evaluated to OK, calculating turn debug: 688.673: TK: turnpt lon/lat is -58.496742111029 | -34.985910078437 debug: 688.673: TK: SWEEP TURN: Lon: -58.496742111029 |Lat: -34.985910078437 |From: 255.35679804476 |To:176.77763420317 | Turning: -1 debug: 688.673: TK: Adding 31 segments to lah debug: 688.674: TK: END: Calculating sweep turn. 31 segments added to the turn debug: 688.674: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.674: TK: Eval flyby processing done debug: 688.675: TK: appending ehsi.mod_route debug: 688.675: TK: ================================================================================PROCESSING POINT 7, GBE== LNAV debug: 688.675: TK: BEGIN: Calculating Flyby params debug: 688.676: TK: Function was passed: 2 arguments debug: 688.676: TK: -58.516273406404 | -35.007871504748 | -58.464722 | -35.750833 | -58.517478 | -34.990347 debug: 688.676: TK: tc: 176.77694450567 tc2: 356.74709504914 debug: 688.677: TK: Turn direction is: 1 debug: 688.677: TK: 3.0853397232392 0.012987857849797 2384.1124369762 debug: 688.677: TK: Flyby is acute. Bringing route to the 90 turn point: -58.466221717024-35.729412264041 debug: 688.678: TK: Done calculating flyby parameters, flyby result status was: acute debug: 688.678: TK: Eval flyby processing done debug: 688.679: TK: Calculating abeam parameters debug: 688.679: TK: 6 Arguments passed to abeamState debug: 688.679: TK: Abeam input: lon1|-58.464722 lat1|-35.750833 lon2|-58.517478 lat2|-34.990347 pos_lon|-58.466222 pos_lat|-35.729412 debug: 688.694: TK: XTD (radians) is: 7.9316311199281e-012 debug: 688.694: TK: XTD (NM) is: 2.7266964882533e-008 NM debug: 688.695: TK: Position status is: abeam debug: 688.695: TK: Intercept course is: 326.74709504914 debug: 688.696: TK: in30Range is: true debug: 688.696: TK: Evaluating Interception ---------------------------------------------------------------------------------- debug: 688.697: TK: 4 Arguments passed debug: 688.697: TK: PosLon: -58.466221717024 |PosLat: -35.729412264041 |Lon1: -58.464722 |Lat1: -35.750833 |Lon2: -58.517478 |Lat2: -34.990347 debug: 688.697: TK: PosCrs: 176.74709626293 debug: 688.698: TK: Calculating abeam parameters debug: 688.698: TK: 6 Arguments passed to abeamState debug: 688.699: TK: Abeam input: lon1|-58.464722 lat1|-35.750833 lon2|-58.517478 lat2|-34.990347 pos_lon|-58.466222 pos_lat|-35.729412 debug: 688.700: TK: XTD (radians) is: 7.9316311199281e-012 debug: 688.700: TK: XTD (NM) is: 2.7266964882533e-008 NM debug: 688.701: TK: Position status is: abeam debug: 688.701: TK: Intercept course is: 326.74709504914 debug: 688.702: TK: in30Range is: true debug: 688.703: TK: State parameters gathered debug: 688.703: TK: short turn is to the inside debug: 688.703: TK: We are crossing over and will evaluate the intercept conditions debug: 688.704: TK: SWEEP TURN: Lon: -58.466221717024 |Lat: -35.729412264041 |From: 176.74709626293 |To:26.747095049143 | Turning: 1 debug: 688.704: TK: Adding 83 segments to lah debug: 688.705: TK: END: Calculating sweep turn. 83 segments added to the turn debug: 688.705: TK: Calculating abeam parameters debug: 688.706: TK: 6 Arguments passed to abeamState debug: 688.706: TK: Abeam input: lon1|-58.464722 lat1|-35.750833 lon2|-58.517478 lat2|-34.990347 pos_lon|-58.516209 pos_lat|-35.720969 debug: 688.707: TK: XTD (radians) is: -0.00069881475877663 debug: 688.708: TK: XTD (NM) is: -2.4023504369844 NM debug: 688.708: TK: Position status is: abeam debug: 688.708: TK: Intercept course is: 26.747095049143 debug: 688.709: TK: in30Range is: true debug: 688.709: TK: tangent abeam is in 30 range, looking at intercept debug: 688.710: TK: BEGIN: Calculating intersection debug: 688.710: TK: END: Calculating Intersection debug: 688.711: TK: BEGIN: Calculating Flyby params debug: 688.711: TK: Function was passed: 7 arguments debug: 688.711: TK: -58.516208669595 | -35.720968509858 | -58.471817461681 | -35.649385302352 | -58.517478 | -34.990347 debug: 688.712: TK: tc: 26.747095049152 tc2: 356.75123555588 debug: 688.712: TK: Turn direction is: -1 debug: 688.713: TK: Flyby evaluated to OK, calculating turn debug: 688.713: TK: turnpt lon/lat is -58.474995486719 | -35.654514849861 debug: 688.713: TK: SWEEP TURN: Lon: -58.474995486719 |Lat: -35.654514849861 |From: 26.72305261485 |To:356.75123555588 | Turning: -1 debug: 688.714: TK: Adding 11 segments to lah debug: 688.714: TK: END: Calculating sweep turn. 11 segments added to the turn debug: 688.715: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.715: TK: At 90 degree point, instant trucourse is: 356.75123555588, now evaluating interception debug: 688.715: TK: ================================================================================PROCESSING POINT 8, R182J== LNAV debug: 688.716: TK: This is the last point debug: 688.716: TK: building routelist from: 8points debug: 688.717: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 688.717: TK: EXITING PROCESS ROUTE FUNCTION debug: 688.718: TK: ==================================================================================================== debug: 688.718: TK: PROCESS ACTIVE calling process_route() debug: 688.719: TK: ==================================================================================================== debug: 688.719: TK: BEGIN PROCESSING VNAV debug: 688.719: TK: ==================================================================================================== debug: 688.720: TK: Cruise altitude is set to: 33000 debug: 688.720: TK: Current altitude is: 50.752349853516 debug: 688.721: TK: ==================================================================================================== debug: 688.721: TK: PROCESSING DESCENT FUNCTION debug: 688.721: TK: ==================================================================================================== debug: 688.722: TK: No suitable E/D point found debug: 688.722: TK: ==================================================================================================== debug: 688.723: TK: PROCESSING CLIMB FUNCTION debug: 688.723: TK: ==================================================================================================== debug: 688.724: TK: Distance to 1500' AGL is estimated at: 4.2 NM debug: 688.724: TK: Starting elevation is: 62 debug: 688.724: TK: Cruise altitude is: 33000 debug: 688.725: TK: Assembling the restriction tables debug: 688.725: TK: inserting climb altitude restriction at: (467) debug: 688.726: TK: Restriction tables built: debug: 688.726: TK: Calculating dist2 and distFrom fields for restrictions debug: 688.726: TK: Duplicating altitude restrictions to the fmc.mod_restrictions.ap_climb table debug: 688.727: TK: ---------------------------------------------------------------------------------------------------- debug: 688.727: TK: VNAV CLIMB - Processing Point: [2] (467) debug: 688.728: TK: ---------------------------------------------------------------------------------------------------- debug: 688.728: TK: Current alt before iteration is: 112 debug: 688.729: TK: most restrictive target alt at (467) is 38000 debug: 688.729: TK: This waypoint is within the takeoff phase debug: 688.729: TK: Calculated altitude this point is: 282.6 ft debug: 688.730: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.730: TK: evaluating (467) for restriction of any type debug: 688.731: TK: >>>> Removing altitude restriction at (467) as we pass this point <<<< 0 restrictions left debug: 688.731: TK: evaluating (467) for restriction of any type debug: 688.731: TK: ---------------------------------------------------------------------------------------------------- debug: 688.732: TK: VNAV CLIMB - Processing Point: [3] EZE12 debug: 688.732: TK: ---------------------------------------------------------------------------------------------------- debug: 688.732: TK: Current alt before iteration is: 283 debug: 688.733: TK: most restrictive target alt at EZE12 is 38000 debug: 688.733: TK: This waypoint is within the takeoff phase debug: 688.733: TK: Calculated altitude this point is: 1531.4 ft debug: 688.734: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.734: TK: evaluating EZE12 for restriction of any type debug: 688.735: TK: evaluating EZE12 for restriction of any type debug: 688.735: TK: ---------------------------------------------------------------------------------------------------- debug: 688.735: TK: VNAV CLIMB - Processing Point: [4] D138J debug: 688.736: TK: ---------------------------------------------------------------------------------------------------- debug: 688.736: TK: Current alt before iteration is: 1531 debug: 688.736: TK: most restrictive target alt at D138J is 38000 debug: 688.737: TK: This WP is out of the takeoff phase debug: 688.737: TK: Able altitude this waypoint is: 6726 debug: 688.738: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.738: TK: We are not going over 10000' during this iteration debug: 688.738: TK: evaluating crossover criteria, currentAlt = 6726.3414046382 debug: 688.739: TK: crossover criteria not met debug: 688.739: TK: Evaluating altitudes before writing debug: 688.739: TK: Current altitude before writing is: 6726.3414046382 debug: 688.740: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.740: TK: Current Alt after writing is 6726.3414046382 | 6726.3414046382 debug: 688.740: TK: VNAV target speed this waypoint: 250 debug: 688.741: TK: evaluating D138J for restriction of any type debug: 688.741: TK: ---------------------------------------------------------------------------------------------------- debug: 688.742: TK: VNAV CLIMB - Processing Point: [5] D156J debug: 688.742: TK: ---------------------------------------------------------------------------------------------------- debug: 688.742: TK: Current alt before iteration is: 6726 debug: 688.743: TK: most restrictive target alt at D156J is 38000 debug: 688.743: TK: This WP is out of the takeoff phase debug: 688.744: TK: Able altitude this waypoint is: 9248 debug: 688.744: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.745: TK: We are not going over 10000' during this iteration debug: 688.745: TK: evaluating crossover criteria, currentAlt = 9248.4024044187 debug: 688.745: TK: crossover criteria not met debug: 688.746: TK: Evaluating altitudes before writing debug: 688.746: TK: Current altitude before writing is: 9248.4024044187 debug: 688.747: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.747: TK: Current Alt after writing is 9248.4024044187 | 9248.4024044187 debug: 688.748: TK: VNAV target speed this waypoint: 250 debug: 688.748: TK: evaluating D156J for restriction of any type debug: 688.749: TK: ---------------------------------------------------------------------------------------------------- debug: 688.749: TK: VNAV CLIMB - Processing Point: [6] R182J debug: 688.750: TK: ---------------------------------------------------------------------------------------------------- debug: 688.750: TK: Current alt before iteration is: 9248 debug: 688.751: TK: most restrictive target alt at R182J is 38000 debug: 688.751: TK: This WP is out of the takeoff phase debug: 688.752: TK: Able altitude this waypoint is: 11259 debug: 688.752: TK: We are crossing over the 10k line debug: 688.753: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.753: TK: Able alt from 10k is: 11183.555960721 debug: 688.754: TK: evaluating crossover criteria, currentAlt = 11183.555960721 debug: 688.754: TK: crossover criteria not met debug: 688.755: TK: Evaluating altitudes before writing debug: 688.755: TK: Current altitude before writing is: 11183.555960721 debug: 688.756: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.756: TK: Current Alt after writing is 11183.555960721 | 11183.555960721 debug: 688.757: TK: VNAV target speed this waypoint: 292 debug: 688.757: TK: evaluating R182J for restriction of any type debug: 688.758: TK: ---------------------------------------------------------------------------------------------------- debug: 688.758: TK: VNAV CLIMB - Processing Point: [7] GBE debug: 688.759: TK: ---------------------------------------------------------------------------------------------------- debug: 688.759: TK: Current alt before iteration is: 11184 debug: 688.759: TK: most restrictive target alt at GBE is 38000 debug: 688.760: TK: This WP is out of the takeoff phase debug: 688.760: TK: Able alt is: 26915.431867104 debug: 688.761: TK: Switchover alt is: 27964.473208432 debug: 688.761: TK: evaluating crossover criteria, currentAlt = 26915.431867104 debug: 688.762: TK: crossover criteria not met debug: 688.763: TK: Evaluating altitudes before writing debug: 688.763: TK: Current altitude before writing is: 26915.431867104 debug: 688.764: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.764: TK: Current Alt after writing is 26915.431867104 | 26915.431867104 debug: 688.765: TK: VNAV target speed this waypoint: 292 debug: 688.765: TK: evaluating GBE for restriction of any type debug: 688.765: TK: ---------------------------------------------------------------------------------------------------- debug: 688.766: TK: VNAV CLIMB - Processing Point: [8] R182J debug: 688.766: TK: ---------------------------------------------------------------------------------------------------- debug: 688.767: TK: Current alt before iteration is: 26915 debug: 688.767: TK: most restrictive target alt at R182J is 38000 debug: 688.768: TK: This WP is out of the takeoff phase debug: 688.769: TK: Able alt is: 32941.794418602 debug: 688.769: TK: Switchover alt is: 27964.473208432 debug: 688.770: TK: We are crossing over the switchover ALT debug: 688.770: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 688.771: TK: Able alt after the switchover is 34559.350115211 debug: 688.771: TK: We have reached the TOC debug: 688.772: TK: a: 29.860938808475 debug: 688.772: TK: Climb distance is: 96.446109062551 debug: 688.772: TK: evaluating crossover criteria, currentAlt = 33000 debug: 688.773: TK: crossover criteria not met debug: 688.773: TK: Evaluating altitudes before writing debug: 688.774: TK: Current altitude before writing is: 33000 debug: 688.774: TK: evalClimbTargetSpeed. Mode is: mach econ debug: 688.775: TK: Current Alt after writing is 33000 | 33000 debug: 688.775: TK: VNAV target speed this waypoint: 1 debug: 688.775: TK: evaluating R182J for restriction of any type debug: 688.776: TK: Calling process_enroute() debug: 688.776: TK: ==================================================================================================== debug: 688.777: TK: PROCESSING ENROUTE FUNCTION debug: 688.777: TK: ==================================================================================================== debug: 688.778: TK: Process missed approach has run debug: 688.778: TK: about to draw green circles debug: 688.779: TK: Draw ing T/C circle debug: 688.779: TK: 96.446109062551 1 debug: 688.779: TK: DONE PROCESSING VNAV debug: 688.780: TK: ==================================================================================================== debug: 688.780: TK: VNAV calling process_route(1) debug: 688.781: TK: ==================================================================================================== debug: 688.781: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 688.782: TK: ==================================================================================================== debug: 688.782: TK: BEGIN: Adding begin point to the source route debug: 688.783: TK: Origin runway exists debug: 688.783: TK: END: Adding begin point to the waypoint table. debug: 688.783: TK: Pre-processing conditionals for LL debug: 688.784: TK: Calculating turn direction from Begin tc1: 100.00824546814 to (467) tc2: 101.00824546814 debug: 688.784: TK: Done preprocessing conditionals for LL debug: 688.785: TK: Beginning auto-close/disco processing debug: 688.785: TK: Begin debug: 688.786: TK: done iterating for auto-close debug: 688.786: TK: Checking for Autoclose debug: 688.787: TK: Exiting autoclose() debug: 688.787: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 688.788: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 688.788: TK: Evaluating flyover for first point. debug: 688.789: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 688.789: TK: Turn to next is to the right debug: 688.790: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 688.790: TK: Next waypoint is outside the turn radius...continuing eval debug: 688.790: TK: Current heading is 100.00824546814 debug: 688.791: TK: Bearing to next is 101.00824546817 debug: 688.791: TK: Heading Change to next waypoint is: 1.0000000000335 degrees debug: 688.792: TK: No change made to route because of small course change, dontcha know debug: 688.792: TK: ================================================================================PROCESSING POINT 2, (467)== LNAV debug: 688.793: TK: BEGIN: Calculating Flyby params debug: 688.793: TK: Function was passed: 2 arguments debug: 688.793: TK: -58.531460400452 | -34.822234166645 | -58.522030968444 | -34.823739606486 | -58.465000 | -34.857500 debug: 688.794: TK: tc: 101.00824546817 tc2: 125.81750320488 debug: 688.794: TK: Turn direction is: 1 debug: 688.795: TK: Flyby evaluated to OK, calculating turn debug: 688.795: TK: turnpt lon/lat is -58.530591087001 | -34.822372988142 debug: 688.795: TK: SWEEP TURN: Lon: -58.530591087001 |Lat: -34.822372988142 |From: 101.00774906147 |To:125.81750320488 | Turning: 1 debug: 688.796: TK: Adding 9 segments to lah debug: 688.796: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 688.797: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.798: TK: Eval flyby processing done debug: 688.798: TK: appending ehsi.mod_route debug: 688.798: TK: ================================================================================PROCESSING POINT 3, EZE12== LNAV debug: 688.799: TK: BEGIN: Calculating Flyby params debug: 688.799: TK: Function was passed: 2 arguments debug: 688.800: TK: -58.514964416734 | -34.827925716273 | -58.465000 | -34.857500 | -58.398374 | -34.947185 debug: 688.800: TK: tc: 125.81346448602 tc2: 148.66659030593 debug: 688.800: TK: Turn direction is: 1 debug: 688.801: TK: Flyby evaluated to OK, calculating turn debug: 688.801: TK: turnpt lon/lat is -58.471510018653 | -34.853649036476 debug: 688.802: TK: SWEEP TURN: Lon: -58.471510018653 |Lat: -34.853649036476 |From: 125.78863907485 |To:148.66659030593 | Turning: 1 debug: 688.802: TK: Adding 9 segments to lah debug: 688.802: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 688.803: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.803: TK: Eval flyby processing done debug: 688.804: TK: appending ehsi.mod_route debug: 688.804: TK: ================================================================================PROCESSING POINT 4, D138J== LNAV debug: 688.804: TK: BEGIN: Calculating Flyby params debug: 688.805: TK: Function was passed: 2 arguments debug: 688.805: TK: -58.460832507031 | -34.863116663083 | -58.398374 | -34.947185 | -58.453656 | -34.976678 debug: 688.805: TK: tc: 148.66420626877 tc2: 236.92077220695 debug: 688.806: TK: Turn direction is: 1 debug: 688.806: TK: Flyby evaluated to OK, calculating turn debug: 688.807: TK: turnpt lon/lat is -58.418427082263 | -34.920216054237 debug: 688.807: TK: SWEEP TURN: Lon: -58.418427082263 |Lat: -34.920216054237 |From: 148.63994923506 |To:236.92077220695 | Turning: 1 debug: 688.807: TK: Adding 35 segments to lah debug: 688.808: TK: END: Calculating sweep turn. 35 segments added to the turn debug: 688.808: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.808: TK: Eval flyby processing done debug: 688.809: TK: appending ehsi.mod_route debug: 688.809: TK: ================================================================================PROCESSING POINT 5, D156J== LNAV debug: 688.810: TK: BEGIN: Calculating Flyby params debug: 688.810: TK: Function was passed: 2 arguments debug: 688.811: TK: -58.430650203166 | -34.964409972506 | -58.453656 | -34.976678 | -58.517478 | -34.990347 debug: 688.811: TK: tc: 236.93919004695 tc2: 255.33209760753 debug: 688.811: TK: Turn direction is: 1 debug: 688.812: TK: Flyby evaluated to OK, calculating turn debug: 688.812: TK: turnpt lon/lat is -58.448270714215 | -34.97380697105 debug: 688.813: TK: SWEEP TURN: Lon: -58.448270714215 |Lat: -34.97380697105 |From: 236.94928897338 |To:255.33209760753 | Turning: 1 debug: 688.813: TK: Adding 7 segments to lah debug: 688.814: TK: END: Calculating sweep turn. 7 segments added to the turn debug: 688.814: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.814: TK: Eval flyby processing done debug: 688.815: TK: appending ehsi.mod_route debug: 688.815: TK: ================================================================================PROCESSING POINT 6, R182J== LNAV debug: 688.816: TK: BEGIN: Calculating Flyby params debug: 688.816: TK: Function was passed: 2 arguments debug: 688.816: TK: -58.459865364314 | -34.978009548347 | -58.517478 | -34.990347 | -58.464722 | -35.750833 debug: 688.817: TK: tc: 255.3356551186 tc2: 176.77763420317 debug: 688.817: TK: Turn direction is: -1 debug: 688.818: TK: Flyby evaluated to OK, calculating turn debug: 688.818: TK: turnpt lon/lat is -58.47468709521 | -34.9811865016 debug: 688.818: TK: SWEEP TURN: Lon: -58.47468709521 |Lat: -34.9811865016 |From: 255.34415219036 |To:176.77763420317 | Turning: -1 debug: 688.819: TK: Adding 31 segments to lah debug: 688.819: TK: END: Calculating sweep turn. 31 segments added to the turn debug: 688.820: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.820: TK: Eval flyby processing done debug: 688.821: TK: appending ehsi.mod_route debug: 688.821: TK: ================================================================================PROCESSING POINT 7, GBE== LNAV debug: 688.822: TK: BEGIN: Calculating Flyby params debug: 688.822: TK: Function was passed: 2 arguments debug: 688.823: TK: -58.514992361529 | -35.026500027363 | -58.464722 | -35.750833 | -58.517478 | -34.990347 debug: 688.823: TK: tc: 176.77621055655 tc2: 356.74709504914 debug: 688.823: TK: Turn direction is: 1 debug: 688.824: TK: 3.0853269134106 0.012662213566496 4920.1756684073 debug: 688.824: TK: Flyby is acute. Bringing route to the 90 turn point: -58.467816131884-35.706626262507 debug: 688.825: TK: Done calculating flyby parameters, flyby result status was: acute debug: 688.825: TK: Eval flyby processing done debug: 688.826: TK: Calculating abeam parameters debug: 688.826: TK: 6 Arguments passed to abeamState debug: 688.827: TK: Abeam input: lon1|-58.464722 lat1|-35.750833 lon2|-58.517478 lat2|-34.990347 pos_lon|-58.467816 pos_lat|-35.706626 debug: 688.827: TK: XTD (radians) is: 3.1784091097217e-011 debug: 688.828: TK: XTD (NM) is: 1.0926575916946e-007 NM debug: 688.828: TK: Position status is: abeam debug: 688.829: TK: Intercept course is: 326.74709504914 debug: 688.829: TK: in30Range is: true debug: 688.830: TK: Evaluating Interception ---------------------------------------------------------------------------------- debug: 688.830: TK: 4 Arguments passed debug: 688.831: TK: PosLon: -58.467816131884 |PosLat: -35.706626262507 |Lon1: -58.464722 |Lat1: -35.750833 |Lon2: -58.517478 |Lat2: -34.990347 debug: 688.831: TK: PosCrs: 176.7470974058 debug: 688.832: TK: Calculating abeam parameters debug: 688.832: TK: 6 Arguments passed to abeamState debug: 688.833: TK: Abeam input: lon1|-58.464722 lat1|-35.750833 lon2|-58.517478 lat2|-34.990347 pos_lon|-58.467816 pos_lat|-35.706626 debug: 688.833: TK: XTD (radians) is: 3.1784091097217e-011 debug: 688.833: TK: XTD (NM) is: 1.0926575916946e-007 NM debug: 688.834: TK: Position status is: abeam debug: 688.834: TK: Intercept course is: 326.74709504914 debug: 688.835: TK: in30Range is: true debug: 688.835: TK: State parameters gathered debug: 688.836: TK: short turn is to the inside debug: 688.836: TK: We are crossing over and will evaluate the intercept conditions debug: 688.836: TK: SWEEP TURN: Lon: -58.467816131884 |Lat: -35.706626262507 |From: 176.7470974058 |To:26.747095049143 | Turning: 1 debug: 688.837: TK: Adding 83 segments to lah debug: 688.838: TK: END: Calculating sweep turn. 83 segments added to the turn debug: 688.838: TK: Calculating abeam parameters debug: 688.839: TK: 6 Arguments passed to abeamState debug: 688.839: TK: Abeam input: lon1|-58.464722 lat1|-35.750833 lon2|-58.517478 lat2|-34.990347 pos_lon|-58.570942 pos_lat|-35.689189 debug: 688.839: TK: XTD (radians) is: -0.0014422847845138 debug: 688.840: TK: XTD (NM) is: -4.9582145179622 NM debug: 688.840: TK: Position status is: abeam debug: 688.841: TK: Intercept course is: 26.747095049143 debug: 688.841: TK: in30Range is: true debug: 688.842: TK: tangent abeam is in 30 range, looking at intercept debug: 688.842: TK: BEGIN: Calculating intersection debug: 688.842: TK: END: Calculating Intersection debug: 688.843: TK: BEGIN: Calculating Flyby params debug: 688.843: TK: Function was passed: 7 arguments debug: 688.844: TK: -58.570941842025 | -35.689189231076 | -58.479358168092 | -35.541288089663 | -58.517478 | -34.990347 debug: 688.844: TK: tc: 26.747095049147 tc2: 356.7556246774 debug: 688.845: TK: Turn direction is: -1 debug: 688.845: TK: Flyby evaluated to OK, calculating turn debug: 688.845: TK: turnpt lon/lat is -58.485894852261 | -35.551864801367 debug: 688.846: TK: SWEEP TURN: Lon: -58.485894852261 |Lat: -35.551864801367 |From: 26.697562429872 |To:356.7556246774 | Turning: -1 debug: 688.846: TK: Adding 11 segments to lah debug: 688.847: TK: END: Calculating sweep turn. 11 segments added to the turn debug: 688.847: TK: Done calculating flyby parameters, flyby result status was: ok debug: 688.847: TK: At 90 degree point, instant trucourse is: 356.7556246774, now evaluating interception debug: 688.848: TK: ================================================================================PROCESSING POINT 8, R182J== LNAV debug: 688.848: TK: This is the last point debug: 688.849: TK: building routelist from: 8points debug: 688.849: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 688.850: TK: EXITING PROCESS ROUTE FUNCTION debug: 688.851: TK: ==================================================================================================== debug: 688.851: TK: EXITING PROCESS ROUTE FUNCTION debug: 688.852: TK: ==================================================================================================== debug: 688.852: TK: Exiting fmc.processActive() debug: 710.610: TK: Looking for coroute DELETE debug: 725.616: TK: Looking for coroute UW29 debug: 725.617: TK: pressed LSK 2L debug: 725.618: TK: displayed route index is: 2 debug: 725.618: TK: We pressed a LSK next to a airway or a procedure debug: 725.619: TK: There is something not DELETE in the scratchpad debug: 725.673: TK: airway found! debug: 725.674: TK: Insert Index is: 8 debug: 725.675: TK: Processing active route debug: 725.675: TK: PROCESS ACTIVE calling process_route(1) debug: 725.676: TK: ==================================================================================================== debug: 725.676: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 725.677: TK: ==================================================================================================== debug: 725.677: TK: BEGIN: Adding begin point to the source route debug: 725.678: TK: Origin runway exists debug: 725.678: TK: END: Adding begin point to the waypoint table. debug: 725.679: TK: Pre-processing conditionals for LL debug: 725.679: TK: Calculating turn direction from Begin tc1: 100.00824546814 to (467) tc2: 101.00824546814 debug: 725.680: TK: Done preprocessing conditionals for LL debug: 725.680: TK: Beginning auto-close/disco processing debug: 725.681: TK: Begin debug: 725.681: TK: done iterating for auto-close debug: 725.682: TK: Checking for Autoclose debug: 725.682: TK: it appears there is a 'duplicates' scenario debug: 725.682: TK: ....and the duplicates are separated by a disco .. R182J debug: 725.683: TK: Exiting autoclose() debug: 725.683: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 725.684: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 725.684: TK: Evaluating flyover for first point. debug: 725.684: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 725.685: TK: Turn to next is to the right debug: 725.685: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 725.686: TK: Next waypoint is outside the turn radius...continuing eval debug: 725.686: TK: Current heading is 100.00824546814 debug: 725.686: TK: Bearing to next is 101.00824546817 debug: 725.687: TK: Heading Change to next waypoint is: 1.0000000000335 degrees debug: 725.687: TK: No change made to route because of small course change, dontcha know debug: 725.688: TK: ================================================================================PROCESSING POINT 2, (467)== LNAV debug: 725.688: TK: BEGIN: Calculating Flyby params debug: 725.689: TK: Function was passed: 2 arguments debug: 725.689: TK: -58.531460400452 | -34.822234166645 | -58.522030968444 | -34.823739606486 | -58.465000 | -34.857500 debug: 725.689: TK: tc: 101.00824546817 tc2: 125.81750320488 debug: 725.690: TK: Turn direction is: 1 debug: 725.690: TK: Flyby evaluated to OK, calculating turn debug: 725.691: TK: turnpt lon/lat is -58.530591087001 | -34.822372988142 debug: 725.691: TK: SWEEP TURN: Lon: -58.530591087001 |Lat: -34.822372988142 |From: 101.00774906147 |To:125.81750320488 | Turning: 1 debug: 725.692: TK: Adding 9 segments to lah debug: 725.692: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 725.692: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.693: TK: Eval flyby processing done debug: 725.693: TK: appending ehsi.mod_route debug: 725.694: TK: ================================================================================PROCESSING POINT 3, EZE12== LNAV debug: 725.694: TK: BEGIN: Calculating Flyby params debug: 725.695: TK: Function was passed: 2 arguments debug: 725.695: TK: -58.514964416734 | -34.827925716273 | -58.465000 | -34.857500 | -58.398374 | -34.947185 debug: 725.695: TK: tc: 125.81346448602 tc2: 148.66659030593 debug: 725.696: TK: Turn direction is: 1 debug: 725.696: TK: Flyby evaluated to OK, calculating turn debug: 725.697: TK: turnpt lon/lat is -58.471510018653 | -34.853649036476 debug: 725.697: TK: SWEEP TURN: Lon: -58.471510018653 |Lat: -34.853649036476 |From: 125.78863907485 |To:148.66659030593 | Turning: 1 debug: 725.697: TK: Adding 9 segments to lah debug: 725.698: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 725.698: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.698: TK: Eval flyby processing done debug: 725.699: TK: appending ehsi.mod_route debug: 725.699: TK: ================================================================================PROCESSING POINT 4, D138J== LNAV debug: 725.700: TK: BEGIN: Calculating Flyby params debug: 725.700: TK: Function was passed: 2 arguments debug: 725.700: TK: -58.460832507031 | -34.863116663083 | -58.398374 | -34.947185 | -58.453656 | -34.976678 debug: 725.701: TK: tc: 148.66420626877 tc2: 236.92077220695 debug: 725.701: TK: Turn direction is: 1 debug: 725.702: TK: Flyby evaluated to OK, calculating turn debug: 725.702: TK: turnpt lon/lat is -58.418427082263 | -34.920216054237 debug: 725.702: TK: SWEEP TURN: Lon: -58.418427082263 |Lat: -34.920216054237 |From: 148.63994923506 |To:236.92077220695 | Turning: 1 debug: 725.703: TK: Adding 35 segments to lah debug: 725.703: TK: END: Calculating sweep turn. 35 segments added to the turn debug: 725.704: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.704: TK: Eval flyby processing done debug: 725.704: TK: appending ehsi.mod_route debug: 725.705: TK: ================================================================================PROCESSING POINT 5, D156J== LNAV debug: 725.705: TK: BEGIN: Calculating Flyby params debug: 725.705: TK: Function was passed: 2 arguments debug: 725.706: TK: -58.430650203166 | -34.964409972506 | -58.453656 | -34.976678 | -58.517478 | -34.990347 debug: 725.706: TK: tc: 236.93919004695 tc2: 255.33209760753 debug: 725.707: TK: Turn direction is: 1 debug: 725.707: TK: Flyby evaluated to OK, calculating turn debug: 725.707: TK: turnpt lon/lat is -58.448270714215 | -34.97380697105 debug: 725.708: TK: SWEEP TURN: Lon: -58.448270714215 |Lat: -34.97380697105 |From: 236.94928897338 |To:255.33209760753 | Turning: 1 debug: 725.708: TK: Adding 7 segments to lah debug: 725.709: TK: END: Calculating sweep turn. 7 segments added to the turn debug: 725.709: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.709: TK: Eval flyby processing done debug: 725.710: TK: appending ehsi.mod_route debug: 725.710: TK: ================================================================================PROCESSING POINT 6, R182J== LNAV debug: 725.710: TK: BEGIN: Calculating Flyby params debug: 725.711: TK: Function was passed: 2 arguments debug: 725.711: TK: -58.459865364314 | -34.978009548347 | -58.517478 | -34.990347 | -58.464722 | -35.750833 debug: 725.712: TK: tc: 255.3356551186 tc2: 176.77763420317 debug: 725.712: TK: Turn direction is: -1 debug: 725.713: TK: Flyby evaluated to OK, calculating turn debug: 725.713: TK: turnpt lon/lat is -58.47468709521 | -34.9811865016 debug: 725.713: TK: SWEEP TURN: Lon: -58.47468709521 |Lat: -34.9811865016 |From: 255.34415219036 |To:176.77763420317 | Turning: -1 debug: 725.714: TK: Adding 31 segments to lah debug: 725.714: TK: END: Calculating sweep turn. 31 segments added to the turn debug: 725.714: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.715: TK: Eval flyby processing done debug: 725.715: TK: appending ehsi.mod_route debug: 725.716: TK: ================================================================================PROCESSING POINT 7, GBE== LNAV debug: 725.716: TK: ================================================================================PROCESSING POINT 8, #####== LNAV debug: 725.716: TK: ================================================================================PROCESSING POINT 9, R182J== LNAV debug: 725.717: TK: This is the last point debug: 725.717: TK: building routelist from: 9points debug: 725.718: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 725.718: TK: EXITING PROCESS ROUTE FUNCTION debug: 725.719: TK: ==================================================================================================== debug: 725.719: TK: PROCESS ACTIVE calling process_route() debug: 725.720: TK: ==================================================================================================== debug: 725.720: TK: BEGIN PROCESSING VNAV debug: 725.720: TK: ==================================================================================================== debug: 725.721: TK: Cruise altitude is set to: 33000 debug: 725.721: TK: Current altitude is: 50.752601623535 debug: 725.721: TK: ==================================================================================================== debug: 725.722: TK: PROCESSING DESCENT FUNCTION debug: 725.722: TK: ==================================================================================================== debug: 725.723: TK: No suitable E/D point found debug: 725.723: TK: ==================================================================================================== debug: 725.723: TK: PROCESSING CLIMB FUNCTION debug: 725.724: TK: ==================================================================================================== debug: 725.724: TK: Distance to 1500' AGL is estimated at: 4.2 NM debug: 725.724: TK: Starting elevation is: 62 debug: 725.725: TK: Cruise altitude is: 33000 debug: 725.725: TK: Assembling the restriction tables debug: 725.725: TK: inserting climb altitude restriction at: (467) debug: 725.726: TK: Restriction tables built: debug: 725.726: TK: Calculating dist2 and distFrom fields for restrictions debug: 725.726: TK: Duplicating altitude restrictions to the fmc.mod_restrictions.ap_climb table debug: 725.727: TK: ---------------------------------------------------------------------------------------------------- debug: 725.727: TK: VNAV CLIMB - Processing Point: [2] (467) debug: 725.728: TK: ---------------------------------------------------------------------------------------------------- debug: 725.728: TK: Current alt before iteration is: 112 debug: 725.728: TK: most restrictive target alt at (467) is 38000 debug: 725.729: TK: This waypoint is within the takeoff phase debug: 725.729: TK: Calculated altitude this point is: 282.7 ft debug: 725.729: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 725.730: TK: evaluating (467) for restriction of any type debug: 725.730: TK: >>>> Removing altitude restriction at (467) as we pass this point <<<< 0 restrictions left debug: 725.730: TK: evaluating (467) for restriction of any type debug: 725.731: TK: ---------------------------------------------------------------------------------------------------- debug: 725.731: TK: VNAV CLIMB - Processing Point: [3] EZE12 debug: 725.731: TK: ---------------------------------------------------------------------------------------------------- debug: 725.732: TK: Current alt before iteration is: 283 debug: 725.732: TK: most restrictive target alt at EZE12 is 38000 debug: 725.732: TK: This waypoint is within the takeoff phase debug: 725.733: TK: Calculated altitude this point is: 1531.7 ft debug: 725.733: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 725.733: TK: evaluating EZE12 for restriction of any type debug: 725.734: TK: evaluating EZE12 for restriction of any type debug: 725.734: TK: ---------------------------------------------------------------------------------------------------- debug: 725.734: TK: VNAV CLIMB - Processing Point: [4] D138J debug: 725.735: TK: ---------------------------------------------------------------------------------------------------- debug: 725.735: TK: Current alt before iteration is: 1532 debug: 725.735: TK: most restrictive target alt at D138J is 38000 debug: 725.736: TK: This WP is out of the takeoff phase debug: 725.736: TK: Able altitude this waypoint is: 6729 debug: 725.736: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 725.737: TK: We are not going over 10000' during this iteration debug: 725.737: TK: evaluating crossover criteria, currentAlt = 6728.5084212985 debug: 725.737: TK: crossover criteria not met debug: 725.738: TK: Evaluating altitudes before writing debug: 725.738: TK: Current altitude before writing is: 6728.5084212985 debug: 725.739: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 725.739: TK: Current Alt after writing is 6728.5084212985 | 6728.5084212985 debug: 725.739: TK: VNAV target speed this waypoint: 250 debug: 725.740: TK: evaluating D138J for restriction of any type debug: 725.740: TK: ---------------------------------------------------------------------------------------------------- debug: 725.741: TK: VNAV CLIMB - Processing Point: [5] D156J debug: 725.741: TK: ---------------------------------------------------------------------------------------------------- debug: 725.741: TK: Current alt before iteration is: 6729 debug: 725.742: TK: most restrictive target alt at D156J is 38000 debug: 725.742: TK: This WP is out of the takeoff phase debug: 725.743: TK: Able altitude this waypoint is: 9251 debug: 725.743: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 725.743: TK: We are not going over 10000' during this iteration debug: 725.744: TK: evaluating crossover criteria, currentAlt = 9250.6555904081 debug: 725.744: TK: crossover criteria not met debug: 725.745: TK: Evaluating altitudes before writing debug: 725.745: TK: Current altitude before writing is: 9250.6555904081 debug: 725.745: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 725.746: TK: Current Alt after writing is 9250.6555904081 | 9250.6555904081 debug: 725.746: TK: VNAV target speed this waypoint: 250 debug: 725.746: TK: evaluating D156J for restriction of any type debug: 725.747: TK: ---------------------------------------------------------------------------------------------------- debug: 725.747: TK: VNAV CLIMB - Processing Point: [6] R182J debug: 725.747: TK: ---------------------------------------------------------------------------------------------------- debug: 725.748: TK: Current alt before iteration is: 9251 debug: 725.748: TK: most restrictive target alt at R182J is 38000 debug: 725.748: TK: This WP is out of the takeoff phase debug: 725.749: TK: Able altitude this waypoint is: 11261 debug: 725.749: TK: We are crossing over the 10k line debug: 725.750: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 725.751: TK: Able alt from 10k is: 11185.779715634 debug: 725.751: TK: evaluating crossover criteria, currentAlt = 11185.779715634 debug: 725.752: TK: crossover criteria not met debug: 725.752: TK: Evaluating altitudes before writing debug: 725.752: TK: Current altitude before writing is: 11185.779715634 debug: 725.753: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 725.753: TK: Current Alt after writing is 11185.779715634 | 11185.779715634 debug: 725.754: TK: VNAV target speed this waypoint: 292 debug: 725.754: TK: evaluating R182J for restriction of any type debug: 725.754: TK: ---------------------------------------------------------------------------------------------------- debug: 725.755: TK: VNAV CLIMB - Processing Point: [7] GBE debug: 725.755: TK: ---------------------------------------------------------------------------------------------------- debug: 725.755: TK: Current alt before iteration is: 11186 debug: 725.756: TK: most restrictive target alt at GBE is 38000 debug: 725.756: TK: This WP is out of the takeoff phase debug: 725.757: TK: Able alt is: 26919.488826991 debug: 725.757: TK: Switchover alt is: 27964.473208432 debug: 725.757: TK: evaluating crossover criteria, currentAlt = 26919.488826991 debug: 725.758: TK: crossover criteria not met debug: 725.758: TK: Evaluating altitudes before writing debug: 725.759: TK: Current altitude before writing is: 26919.488826991 debug: 725.759: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 725.760: TK: Current Alt after writing is 26919.488826991 | 26919.488826991 debug: 725.760: TK: VNAV target speed this waypoint: 292 debug: 725.761: TK: evaluating GBE for restriction of any type debug: 725.761: TK: Calling process_enroute() debug: 725.762: TK: ==================================================================================================== debug: 725.762: TK: PROCESSING ENROUTE FUNCTION debug: 725.763: TK: ==================================================================================================== debug: 725.763: TK: TOC not reached, no enroute to process debug: 725.764: TK: about to draw green circles debug: 725.764: TK: DONE PROCESSING VNAV debug: 725.765: TK: ==================================================================================================== debug: 725.765: TK: VNAV calling process_route(1) debug: 725.766: TK: ==================================================================================================== debug: 725.766: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 725.767: TK: ==================================================================================================== debug: 725.767: TK: BEGIN: Adding begin point to the source route debug: 725.768: TK: Origin runway exists debug: 725.768: TK: END: Adding begin point to the waypoint table. debug: 725.769: TK: Pre-processing conditionals for LL debug: 725.769: TK: Calculating turn direction from Begin tc1: 100.00824546814 to (467) tc2: 101.00824546814 debug: 725.769: TK: Done preprocessing conditionals for LL debug: 725.770: TK: Beginning auto-close/disco processing debug: 725.770: TK: Begin debug: 725.771: TK: done iterating for auto-close debug: 725.771: TK: Checking for Autoclose debug: 725.771: TK: it appears there is a 'duplicates' scenario debug: 725.772: TK: ....and the duplicates are separated by a disco .. R182J debug: 725.772: TK: Exiting autoclose() debug: 725.772: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 725.773: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 725.773: TK: Evaluating flyover for first point. debug: 725.774: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 725.774: TK: Turn to next is to the right debug: 725.774: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 725.775: TK: Next waypoint is outside the turn radius...continuing eval debug: 725.775: TK: Current heading is 100.00824546814 debug: 725.775: TK: Bearing to next is 101.00824546817 debug: 725.776: TK: Heading Change to next waypoint is: 1.0000000000335 degrees debug: 725.776: TK: No change made to route because of small course change, dontcha know debug: 725.777: TK: ================================================================================PROCESSING POINT 2, (467)== LNAV debug: 725.777: TK: BEGIN: Calculating Flyby params debug: 725.778: TK: Function was passed: 2 arguments debug: 725.778: TK: -58.531460400452 | -34.822234166645 | -58.522030968444 | -34.823739606486 | -58.465000 | -34.857500 debug: 725.778: TK: tc: 101.00824546817 tc2: 125.81750320488 debug: 725.779: TK: Turn direction is: 1 debug: 725.779: TK: Flyby evaluated to OK, calculating turn debug: 725.780: TK: turnpt lon/lat is -58.530591087001 | -34.822372988142 debug: 725.780: TK: SWEEP TURN: Lon: -58.530591087001 |Lat: -34.822372988142 |From: 101.00774906147 |To:125.81750320488 | Turning: 1 debug: 725.780: TK: Adding 9 segments to lah debug: 725.781: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 725.781: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.781: TK: Eval flyby processing done debug: 725.782: TK: appending ehsi.mod_route debug: 725.782: TK: ================================================================================PROCESSING POINT 3, EZE12== LNAV debug: 725.782: TK: BEGIN: Calculating Flyby params debug: 725.783: TK: Function was passed: 2 arguments debug: 725.783: TK: -58.514964416734 | -34.827925716273 | -58.465000 | -34.857500 | -58.398374 | -34.947185 debug: 725.784: TK: tc: 125.81346448602 tc2: 148.66659030593 debug: 725.784: TK: Turn direction is: 1 debug: 725.784: TK: Flyby evaluated to OK, calculating turn debug: 725.785: TK: turnpt lon/lat is -58.471510018653 | -34.853649036476 debug: 725.785: TK: SWEEP TURN: Lon: -58.471510018653 |Lat: -34.853649036476 |From: 125.78863907485 |To:148.66659030593 | Turning: 1 debug: 725.785: TK: Adding 9 segments to lah debug: 725.786: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 725.786: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.786: TK: Eval flyby processing done debug: 725.787: TK: appending ehsi.mod_route debug: 725.787: TK: ================================================================================PROCESSING POINT 4, D138J== LNAV debug: 725.787: TK: BEGIN: Calculating Flyby params debug: 725.788: TK: Function was passed: 2 arguments debug: 725.788: TK: -58.460832507031 | -34.863116663083 | -58.398374 | -34.947185 | -58.453656 | -34.976678 debug: 725.789: TK: tc: 148.66420626877 tc2: 236.92077220695 debug: 725.789: TK: Turn direction is: 1 debug: 725.789: TK: Flyby evaluated to OK, calculating turn debug: 725.790: TK: turnpt lon/lat is -58.418427082263 | -34.920216054237 debug: 725.790: TK: SWEEP TURN: Lon: -58.418427082263 |Lat: -34.920216054237 |From: 148.63994923506 |To:236.92077220695 | Turning: 1 debug: 725.790: TK: Adding 35 segments to lah debug: 725.791: TK: END: Calculating sweep turn. 35 segments added to the turn debug: 725.791: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.792: TK: Eval flyby processing done debug: 725.792: TK: appending ehsi.mod_route debug: 725.792: TK: ================================================================================PROCESSING POINT 5, D156J== LNAV debug: 725.793: TK: BEGIN: Calculating Flyby params debug: 725.793: TK: Function was passed: 2 arguments debug: 725.794: TK: -58.430650203166 | -34.964409972506 | -58.453656 | -34.976678 | -58.517478 | -34.990347 debug: 725.794: TK: tc: 236.93919004695 tc2: 255.33209760753 debug: 725.795: TK: Turn direction is: 1 debug: 725.795: TK: Flyby evaluated to OK, calculating turn debug: 725.795: TK: turnpt lon/lat is -58.448270714215 | -34.97380697105 debug: 725.796: TK: SWEEP TURN: Lon: -58.448270714215 |Lat: -34.97380697105 |From: 236.94928897338 |To:255.33209760753 | Turning: 1 debug: 725.796: TK: Adding 7 segments to lah debug: 725.797: TK: END: Calculating sweep turn. 7 segments added to the turn debug: 725.797: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.798: TK: Eval flyby processing done debug: 725.798: TK: appending ehsi.mod_route debug: 725.798: TK: ================================================================================PROCESSING POINT 6, R182J== LNAV debug: 725.799: TK: BEGIN: Calculating Flyby params debug: 725.799: TK: Function was passed: 2 arguments debug: 725.799: TK: -58.459865364314 | -34.978009548347 | -58.517478 | -34.990347 | -58.464722 | -35.750833 debug: 725.800: TK: tc: 255.3356551186 tc2: 176.77763420317 debug: 725.800: TK: Turn direction is: -1 debug: 725.801: TK: Flyby evaluated to OK, calculating turn debug: 725.801: TK: turnpt lon/lat is -58.474689870232 | -34.981187096218 debug: 725.802: TK: SWEEP TURN: Lon: -58.474689870232 |Lat: -34.981187096218 |From: 255.34415378132 |To:176.77763420317 | Turning: -1 debug: 725.802: TK: Adding 31 segments to lah debug: 725.802: TK: END: Calculating sweep turn. 31 segments added to the turn debug: 725.803: TK: Done calculating flyby parameters, flyby result status was: ok debug: 725.803: TK: Eval flyby processing done debug: 725.803: TK: appending ehsi.mod_route debug: 725.804: TK: ================================================================================PROCESSING POINT 7, GBE== LNAV debug: 725.804: TK: ================================================================================PROCESSING POINT 8, #####== LNAV debug: 725.804: TK: ================================================================================PROCESSING POINT 9, R182J== LNAV debug: 725.805: TK: This is the last point debug: 725.805: TK: building routelist from: 9points debug: 725.805: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 725.806: TK: EXITING PROCESS ROUTE FUNCTION debug: 725.806: TK: ==================================================================================================== debug: 725.806: TK: EXITING PROCESS ROUTE FUNCTION debug: 725.807: TK: ==================================================================================================== debug: 725.807: TK: Exiting fmc.processActive() debug: 737.806: TK: attempting to append airway points debug: 737.807: TK: exit index is: 34 debug: 737.807: TK: entry index is: 32 debug: 737.808: TK: insert Index is: 8 debug: 737.808: TK: 2 debug: 737.808: TK: done appending airway points debug: 737.809: TK: Processing active route debug: 737.809: TK: PROCESS ACTIVE calling process_route(1) debug: 737.810: TK: ==================================================================================================== debug: 737.810: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 737.810: TK: ==================================================================================================== debug: 737.811: TK: BEGIN: Adding begin point to the source route debug: 737.811: TK: Origin runway exists debug: 737.812: TK: END: Adding begin point to the waypoint table. debug: 737.812: TK: Pre-processing conditionals for LL debug: 737.812: TK: Calculating turn direction from Begin tc1: 100.00824546814 to (467) tc2: 101.00824546814 debug: 737.813: TK: Done preprocessing conditionals for LL debug: 737.813: TK: Beginning auto-close/disco processing debug: 737.813: TK: Begin debug: 737.814: TK: done iterating for auto-close debug: 737.814: TK: Checking for Autoclose debug: 737.814: TK: it appears there is a 'duplicates' scenario debug: 737.815: TK: ....and the duplicates are separated by a disco .. R182J debug: 737.815: TK: it appears there is a 'duplicates' scenario debug: 737.816: TK: ....and the duplicates are adjacent...GBE debug: 737.816: TK: Exiting autoclose() debug: 737.816: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 737.817: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 737.817: TK: Evaluating flyover for first point. debug: 737.817: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 737.818: TK: Turn to next is to the right debug: 737.818: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 737.818: TK: Next waypoint is outside the turn radius...continuing eval debug: 737.819: TK: Current heading is 100.00824546814 debug: 737.819: TK: Bearing to next is 101.00824546817 debug: 737.819: TK: Heading Change to next waypoint is: 1.0000000000335 degrees debug: 737.820: TK: No change made to route because of small course change, dontcha know debug: 737.820: TK: ================================================================================PROCESSING POINT 2, (467)== LNAV debug: 737.821: TK: BEGIN: Calculating Flyby params debug: 737.821: TK: Function was passed: 2 arguments debug: 737.822: TK: -58.531460400452 | -34.822234166645 | -58.522030968444 | -34.823739606486 | -58.465000 | -34.857500 debug: 737.822: TK: tc: 101.00824546817 tc2: 125.81750320488 debug: 737.822: TK: Turn direction is: 1 debug: 737.823: TK: Flyby evaluated to OK, calculating turn debug: 737.823: TK: turnpt lon/lat is -58.530591087001 | -34.822372988142 debug: 737.823: TK: SWEEP TURN: Lon: -58.530591087001 |Lat: -34.822372988142 |From: 101.00774906147 |To:125.81750320488 | Turning: 1 debug: 737.824: TK: Adding 9 segments to lah debug: 737.824: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 737.825: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.825: TK: Eval flyby processing done debug: 737.826: TK: appending ehsi.mod_route debug: 737.826: TK: ================================================================================PROCESSING POINT 3, EZE12== LNAV debug: 737.827: TK: BEGIN: Calculating Flyby params debug: 737.827: TK: Function was passed: 2 arguments debug: 737.828: TK: -58.514964416734 | -34.827925716273 | -58.465000 | -34.857500 | -58.398374 | -34.947185 debug: 737.828: TK: tc: 125.81346448602 tc2: 148.66659030593 debug: 737.829: TK: Turn direction is: 1 debug: 737.829: TK: Flyby evaluated to OK, calculating turn debug: 737.829: TK: turnpt lon/lat is -58.471510018653 | -34.853649036476 debug: 737.830: TK: SWEEP TURN: Lon: -58.471510018653 |Lat: -34.853649036476 |From: 125.78863907485 |To:148.66659030593 | Turning: 1 debug: 737.830: TK: Adding 9 segments to lah debug: 737.831: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 737.831: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.832: TK: Eval flyby processing done debug: 737.832: TK: appending ehsi.mod_route debug: 737.833: TK: ================================================================================PROCESSING POINT 4, D138J== LNAV debug: 737.833: TK: BEGIN: Calculating Flyby params debug: 737.834: TK: Function was passed: 2 arguments debug: 737.834: TK: -58.460832507031 | -34.863116663083 | -58.398374 | -34.947185 | -58.453656 | -34.976678 debug: 737.835: TK: tc: 148.66420626877 tc2: 236.92077220695 debug: 737.835: TK: Turn direction is: 1 debug: 737.835: TK: Flyby evaluated to OK, calculating turn debug: 737.836: TK: turnpt lon/lat is -58.418427082263 | -34.920216054237 debug: 737.836: TK: SWEEP TURN: Lon: -58.418427082263 |Lat: -34.920216054237 |From: 148.63994923506 |To:236.92077220695 | Turning: 1 debug: 737.837: TK: Adding 35 segments to lah debug: 737.837: TK: END: Calculating sweep turn. 35 segments added to the turn debug: 737.838: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.838: TK: Eval flyby processing done debug: 737.838: TK: appending ehsi.mod_route debug: 737.839: TK: ================================================================================PROCESSING POINT 5, D156J== LNAV debug: 737.839: TK: BEGIN: Calculating Flyby params debug: 737.840: TK: Function was passed: 2 arguments debug: 737.840: TK: -58.430650203166 | -34.964409972506 | -58.453656 | -34.976678 | -58.517478 | -34.990347 debug: 737.840: TK: tc: 236.93919004695 tc2: 255.33209760753 debug: 737.841: TK: Turn direction is: 1 debug: 737.841: TK: Flyby evaluated to OK, calculating turn debug: 737.842: TK: turnpt lon/lat is -58.448270714215 | -34.97380697105 debug: 737.842: TK: SWEEP TURN: Lon: -58.448270714215 |Lat: -34.97380697105 |From: 236.94928897338 |To:255.33209760753 | Turning: 1 debug: 737.842: TK: Adding 7 segments to lah debug: 737.843: TK: END: Calculating sweep turn. 7 segments added to the turn debug: 737.843: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.844: TK: Eval flyby processing done debug: 737.844: TK: appending ehsi.mod_route debug: 737.845: TK: ================================================================================PROCESSING POINT 6, R182J== LNAV debug: 737.845: TK: BEGIN: Calculating Flyby params debug: 737.845: TK: Function was passed: 2 arguments debug: 737.846: TK: -58.459865364314 | -34.978009548347 | -58.517478 | -34.990347 | -58.464722 | -35.750833 debug: 737.846: TK: tc: 255.3356551186 tc2: 176.77763420317 debug: 737.847: TK: Turn direction is: -1 debug: 737.847: TK: Flyby evaluated to OK, calculating turn debug: 737.847: TK: turnpt lon/lat is -58.474689870232 | -34.981187096218 debug: 737.848: TK: SWEEP TURN: Lon: -58.474689870232 |Lat: -34.981187096218 |From: 255.34415378132 |To:176.77763420317 | Turning: -1 debug: 737.848: TK: Adding 31 segments to lah debug: 737.849: TK: END: Calculating sweep turn. 31 segments added to the turn debug: 737.849: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.849: TK: Eval flyby processing done debug: 737.850: TK: appending ehsi.mod_route debug: 737.850: TK: ================================================================================PROCESSING POINT 7, GBE== LNAV debug: 737.850: TK: BEGIN: Calculating Flyby params debug: 737.851: TK: Function was passed: 2 arguments debug: 737.851: TK: -58.514992522701 | -35.026497684174 | -58.464722 | -35.750833 | -58.029444 | -37.063889 debug: 737.852: TK: tc: 176.77621064893 tc2: 165.19041393291 debug: 737.852: TK: Turn direction is: -1 debug: 737.853: TK: Flyby evaluated to OK, calculating turn debug: 737.853: TK: turnpt lon/lat is -58.464873799617 | -35.748665342323 debug: 737.853: TK: SWEEP TURN: Lon: -58.464873799617 |Lat: -35.748665342323 |From: 176.74718609399 |To:165.19041393291 | Turning: -1 debug: 737.854: TK: Adding 4 segments to lah debug: 737.854: TK: END: Calculating sweep turn. 4 segments added to the turn debug: 737.855: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.855: TK: Eval flyby processing done debug: 737.855: TK: appending ehsi.mod_route debug: 737.856: TK: ================================================================================PROCESSING POINT 8, VOTRA== LNAV debug: 737.856: TK: BEGIN: Calculating Flyby params debug: 737.857: TK: Function was passed: 2 arguments debug: 737.857: TK: -58.464039971303 | -35.752926475078 | -58.029444 | -37.063889 | -57.576444 | -37.929833 debug: 737.857: TK: tc: 165.19001548811 tc2: 157.59701861617 debug: 737.858: TK: Turn direction is: -1 debug: 737.858: TK: Flyby evaluated to OK, calculating turn debug: 737.859: TK: turnpt lon/lat is -58.029892023233 | -37.062561045451 debug: 737.859: TK: SWEEP TURN: Lon: -58.029892023233 |Lat: -37.062561045451 |From: 164.93231904191 |To:157.59701861617 | Turning: -1 debug: 737.859: TK: Adding 2 segments to lah debug: 737.860: TK: END: Calculating sweep turn. 2 segments added to the turn debug: 737.860: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.861: TK: Eval flyby processing done debug: 737.861: TK: appending ehsi.mod_route debug: 737.862: TK: ================================================================================PROCESSING POINT 9, MDP== LNAV debug: 737.862: TK: ================================================================================PROCESSING POINT 10, #####== LNAV debug: 737.862: TK: ================================================================================PROCESSING POINT 11, R182J== LNAV debug: 737.863: TK: This is the last point debug: 737.863: TK: building routelist from: 11points debug: 737.864: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 737.864: TK: EXITING PROCESS ROUTE FUNCTION debug: 737.865: TK: ==================================================================================================== debug: 737.865: TK: PROCESS ACTIVE calling process_route() debug: 737.866: TK: ==================================================================================================== debug: 737.866: TK: BEGIN PROCESSING VNAV debug: 737.866: TK: ==================================================================================================== debug: 737.867: TK: Cruise altitude is set to: 33000 debug: 737.867: TK: Current altitude is: 50.75260925293 debug: 737.868: TK: ==================================================================================================== debug: 737.868: TK: PROCESSING DESCENT FUNCTION debug: 737.868: TK: ==================================================================================================== debug: 737.869: TK: No suitable E/D point found debug: 737.869: TK: ==================================================================================================== debug: 737.870: TK: PROCESSING CLIMB FUNCTION debug: 737.870: TK: ==================================================================================================== debug: 737.870: TK: Distance to 1500' AGL is estimated at: 4.2 NM debug: 737.871: TK: Starting elevation is: 62 debug: 737.871: TK: Cruise altitude is: 33000 debug: 737.872: TK: Assembling the restriction tables debug: 737.872: TK: inserting climb altitude restriction at: (467) debug: 737.872: TK: Restriction tables built: debug: 737.873: TK: Calculating dist2 and distFrom fields for restrictions debug: 737.873: TK: Duplicating altitude restrictions to the fmc.mod_restrictions.ap_climb table debug: 737.874: TK: ---------------------------------------------------------------------------------------------------- debug: 737.874: TK: VNAV CLIMB - Processing Point: [2] (467) debug: 737.874: TK: ---------------------------------------------------------------------------------------------------- debug: 737.875: TK: Current alt before iteration is: 112 debug: 737.875: TK: most restrictive target alt at (467) is 38000 debug: 737.876: TK: This waypoint is within the takeoff phase debug: 737.876: TK: Calculated altitude this point is: 282.7 ft debug: 737.876: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 737.877: TK: evaluating (467) for restriction of any type debug: 737.877: TK: >>>> Removing altitude restriction at (467) as we pass this point <<<< 0 restrictions left debug: 737.878: TK: evaluating (467) for restriction of any type debug: 737.878: TK: ---------------------------------------------------------------------------------------------------- debug: 737.878: TK: VNAV CLIMB - Processing Point: [3] EZE12 debug: 737.879: TK: ---------------------------------------------------------------------------------------------------- debug: 737.879: TK: Current alt before iteration is: 283 debug: 737.880: TK: most restrictive target alt at EZE12 is 38000 debug: 737.880: TK: This waypoint is within the takeoff phase debug: 737.880: TK: Calculated altitude this point is: 1531.8 ft debug: 737.881: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 737.881: TK: evaluating EZE12 for restriction of any type debug: 737.882: TK: evaluating EZE12 for restriction of any type debug: 737.882: TK: ---------------------------------------------------------------------------------------------------- debug: 737.882: TK: VNAV CLIMB - Processing Point: [4] D138J debug: 737.883: TK: ---------------------------------------------------------------------------------------------------- debug: 737.883: TK: Current alt before iteration is: 1532 debug: 737.883: TK: most restrictive target alt at D138J is 38000 debug: 737.884: TK: This WP is out of the takeoff phase debug: 737.884: TK: Able altitude this waypoint is: 6729 debug: 737.885: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 737.885: TK: We are not going over 10000' during this iteration debug: 737.886: TK: evaluating crossover criteria, currentAlt = 6729.2188940767 debug: 737.886: TK: crossover criteria not met debug: 737.886: TK: Evaluating altitudes before writing debug: 737.887: TK: Current altitude before writing is: 6729.2188940767 debug: 737.887: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 737.888: TK: Current Alt after writing is 6729.2188940767 | 6729.2188940767 debug: 737.888: TK: VNAV target speed this waypoint: 250 debug: 737.889: TK: evaluating D138J for restriction of any type debug: 737.889: TK: ---------------------------------------------------------------------------------------------------- debug: 737.889: TK: VNAV CLIMB - Processing Point: [5] D156J debug: 737.890: TK: ---------------------------------------------------------------------------------------------------- debug: 737.890: TK: Current alt before iteration is: 6729 debug: 737.891: TK: most restrictive target alt at D156J is 38000 debug: 737.891: TK: This WP is out of the takeoff phase debug: 737.891: TK: Able altitude this waypoint is: 9251 debug: 737.892: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 737.892: TK: We are not going over 10000' during this iteration debug: 737.893: TK: evaluating crossover criteria, currentAlt = 9251.3941474137 debug: 737.893: TK: crossover criteria not met debug: 737.893: TK: Evaluating altitudes before writing debug: 737.894: TK: Current altitude before writing is: 9251.3941474137 debug: 737.894: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 737.895: TK: Current Alt after writing is 9251.3941474137 | 9251.3941474137 debug: 737.895: TK: VNAV target speed this waypoint: 250 debug: 737.895: TK: evaluating D156J for restriction of any type debug: 737.896: TK: ---------------------------------------------------------------------------------------------------- debug: 737.896: TK: VNAV CLIMB - Processing Point: [6] R182J debug: 737.897: TK: ---------------------------------------------------------------------------------------------------- debug: 737.897: TK: Current alt before iteration is: 9251 debug: 737.897: TK: most restrictive target alt at R182J is 38000 debug: 737.898: TK: This WP is out of the takeoff phase debug: 737.898: TK: Able altitude this waypoint is: 11262 debug: 737.899: TK: We are crossing over the 10k line debug: 737.899: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 737.899: TK: Able alt from 10k is: 11186.508494613 debug: 737.900: TK: evaluating crossover criteria, currentAlt = 11186.508494613 debug: 737.900: TK: crossover criteria not met debug: 737.901: TK: Evaluating altitudes before writing debug: 737.901: TK: Current altitude before writing is: 11186.508494613 debug: 737.901: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 737.902: TK: Current Alt after writing is 11186.508494613 | 11186.508494613 debug: 737.902: TK: VNAV target speed this waypoint: 292 debug: 737.903: TK: evaluating R182J for restriction of any type debug: 737.903: TK: ---------------------------------------------------------------------------------------------------- debug: 737.903: TK: VNAV CLIMB - Processing Point: [7] GBE debug: 737.904: TK: ---------------------------------------------------------------------------------------------------- debug: 737.904: TK: Current alt before iteration is: 11187 debug: 737.904: TK: most restrictive target alt at GBE is 38000 debug: 737.905: TK: This WP is out of the takeoff phase debug: 737.905: TK: Able alt is: 26920.818616587 debug: 737.906: TK: Switchover alt is: 27964.473208432 debug: 737.906: TK: evaluating crossover criteria, currentAlt = 26920.818616587 debug: 737.906: TK: crossover criteria not met debug: 737.907: TK: Evaluating altitudes before writing debug: 737.908: TK: Current altitude before writing is: 26920.818616587 debug: 737.908: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 737.908: TK: Current Alt after writing is 26920.818616587 | 26920.818616587 debug: 737.909: TK: VNAV target speed this waypoint: 292 debug: 737.909: TK: evaluating GBE for restriction of any type debug: 737.910: TK: ---------------------------------------------------------------------------------------------------- debug: 737.910: TK: VNAV CLIMB - Processing Point: [8] VOTRA debug: 737.910: TK: ---------------------------------------------------------------------------------------------------- debug: 737.911: TK: Current alt before iteration is: 26921 debug: 737.911: TK: most restrictive target alt at VOTRA is 38000 debug: 737.912: TK: This WP is out of the takeoff phase debug: 737.912: TK: Able alt is: 35014.778636663 debug: 737.912: TK: Switchover alt is: 27964.473208432 debug: 737.913: TK: We have reached the TOC debug: 737.913: TK: a: 46.065472902358 debug: 737.914: TK: Climb distance is: 112.64938220781 debug: 737.914: TK: evaluating crossover criteria, currentAlt = 33000 debug: 737.914: TK: crossover criteria not met debug: 737.915: TK: Evaluating altitudes before writing debug: 737.915: TK: Current altitude before writing is: 33000 debug: 737.916: TK: evalClimbTargetSpeed. Mode is: mach econ debug: 737.916: TK: Current Alt after writing is 33000 | 33000 debug: 737.916: TK: VNAV target speed this waypoint: 1 debug: 737.917: TK: evaluating VOTRA for restriction of any type debug: 737.917: TK: We reached TOC, breaking out of the iterator for climb processing debug: 737.918: TK: Calling process_enroute() debug: 737.918: TK: ==================================================================================================== debug: 737.918: TK: PROCESSING ENROUTE FUNCTION debug: 737.919: TK: ==================================================================================================== debug: 737.919: TK: Process missed approach has run debug: 737.920: TK: about to draw green circles debug: 737.920: TK: Draw ing T/C circle debug: 737.920: TK: 112.64938220781 1 debug: 737.921: TK: DONE PROCESSING VNAV debug: 737.921: TK: ==================================================================================================== debug: 737.922: TK: VNAV calling process_route(1) debug: 737.922: TK: ==================================================================================================== debug: 737.922: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 737.923: TK: ==================================================================================================== debug: 737.923: TK: BEGIN: Adding begin point to the source route debug: 737.924: TK: Origin runway exists debug: 737.924: TK: END: Adding begin point to the waypoint table. debug: 737.924: TK: Pre-processing conditionals for LL debug: 737.925: TK: Calculating turn direction from Begin tc1: 100.00824546814 to (467) tc2: 101.00824546814 debug: 737.925: TK: Done preprocessing conditionals for LL debug: 737.926: TK: Beginning auto-close/disco processing debug: 737.926: TK: Begin debug: 737.927: TK: done iterating for auto-close debug: 737.927: TK: Checking for Autoclose debug: 737.928: TK: it appears there is a 'duplicates' scenario debug: 737.928: TK: ....and the duplicates are separated by a disco .. R182J debug: 737.928: TK: Exiting autoclose() debug: 737.929: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 737.929: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 737.930: TK: Evaluating flyover for first point. debug: 737.930: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 737.931: TK: Turn to next is to the right debug: 737.932: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 737.934: TK: Next waypoint is outside the turn radius...continuing eval debug: 737.934: TK: Current heading is 100.00824546814 debug: 737.934: TK: Bearing to next is 101.00824546817 debug: 737.935: TK: Heading Change to next waypoint is: 1.0000000000335 degrees debug: 737.935: TK: No change made to route because of small course change, dontcha know debug: 737.935: TK: ================================================================================PROCESSING POINT 2, (467)== LNAV debug: 737.936: TK: BEGIN: Calculating Flyby params debug: 737.936: TK: Function was passed: 2 arguments debug: 737.936: TK: -58.531460400452 | -34.822234166645 | -58.522030968444 | -34.823739606486 | -58.465000 | -34.857500 debug: 737.937: TK: tc: 101.00824546817 tc2: 125.81750320488 debug: 737.937: TK: Turn direction is: 1 debug: 737.937: TK: Flyby evaluated to OK, calculating turn debug: 737.938: TK: turnpt lon/lat is -58.530591087001 | -34.822372988142 debug: 737.938: TK: SWEEP TURN: Lon: -58.530591087001 |Lat: -34.822372988142 |From: 101.00774906147 |To:125.81750320488 | Turning: 1 debug: 737.938: TK: Adding 9 segments to lah debug: 737.939: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 737.939: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.940: TK: Eval flyby processing done debug: 737.940: TK: appending ehsi.mod_route debug: 737.940: TK: ================================================================================PROCESSING POINT 3, EZE12== LNAV debug: 737.941: TK: BEGIN: Calculating Flyby params debug: 737.941: TK: Function was passed: 2 arguments debug: 737.941: TK: -58.514964416734 | -34.827925716273 | -58.465000 | -34.857500 | -58.398374 | -34.947185 debug: 737.942: TK: tc: 125.81346448602 tc2: 148.66659030593 debug: 737.942: TK: Turn direction is: 1 debug: 737.942: TK: Flyby evaluated to OK, calculating turn debug: 737.943: TK: turnpt lon/lat is -58.471510018653 | -34.853649036476 debug: 737.943: TK: SWEEP TURN: Lon: -58.471510018653 |Lat: -34.853649036476 |From: 125.78863907485 |To:148.66659030593 | Turning: 1 debug: 737.943: TK: Adding 9 segments to lah debug: 737.944: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 737.944: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.945: TK: Eval flyby processing done debug: 737.945: TK: appending ehsi.mod_route debug: 737.945: TK: ================================================================================PROCESSING POINT 4, D138J== LNAV debug: 737.946: TK: BEGIN: Calculating Flyby params debug: 737.946: TK: Function was passed: 2 arguments debug: 737.946: TK: -58.460832507031 | -34.863116663083 | -58.398374 | -34.947185 | -58.453656 | -34.976678 debug: 737.947: TK: tc: 148.66420626877 tc2: 236.92077220695 debug: 737.947: TK: Turn direction is: 1 debug: 737.948: TK: Flyby evaluated to OK, calculating turn debug: 737.948: TK: turnpt lon/lat is -58.418427082263 | -34.920216054237 debug: 737.948: TK: SWEEP TURN: Lon: -58.418427082263 |Lat: -34.920216054237 |From: 148.63994923506 |To:236.92077220695 | Turning: 1 debug: 737.949: TK: Adding 35 segments to lah debug: 737.949: TK: END: Calculating sweep turn. 35 segments added to the turn debug: 737.949: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.950: TK: Eval flyby processing done debug: 737.950: TK: appending ehsi.mod_route debug: 737.950: TK: ================================================================================PROCESSING POINT 5, D156J== LNAV debug: 737.951: TK: BEGIN: Calculating Flyby params debug: 737.951: TK: Function was passed: 2 arguments debug: 737.951: TK: -58.430650203166 | -34.964409972506 | -58.453656 | -34.976678 | -58.517478 | -34.990347 debug: 737.952: TK: tc: 236.93919004695 tc2: 255.33209760753 debug: 737.952: TK: Turn direction is: 1 debug: 737.952: TK: Flyby evaluated to OK, calculating turn debug: 737.953: TK: turnpt lon/lat is -58.448270714215 | -34.97380697105 debug: 737.953: TK: SWEEP TURN: Lon: -58.448270714215 |Lat: -34.97380697105 |From: 236.94928897338 |To:255.33209760753 | Turning: 1 debug: 737.953: TK: Adding 7 segments to lah debug: 737.954: TK: END: Calculating sweep turn. 7 segments added to the turn debug: 737.954: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.954: TK: Eval flyby processing done debug: 737.955: TK: appending ehsi.mod_route debug: 737.955: TK: ================================================================================PROCESSING POINT 6, R182J== LNAV debug: 737.955: TK: BEGIN: Calculating Flyby params debug: 737.956: TK: Function was passed: 2 arguments debug: 737.956: TK: -58.459865364314 | -34.978009548347 | -58.517478 | -34.990347 | -58.464722 | -35.750833 debug: 737.957: TK: tc: 255.3356551186 tc2: 176.77763420317 debug: 737.957: TK: Turn direction is: -1 debug: 737.957: TK: Flyby evaluated to OK, calculating turn debug: 737.957: TK: turnpt lon/lat is -58.47469077994 | -34.981187291146 debug: 737.958: TK: SWEEP TURN: Lon: -58.47469077994 |Lat: -34.981187291146 |From: 255.34415430288 |To:176.77763420317 | Turning: -1 debug: 737.958: TK: Adding 31 segments to lah debug: 737.958: TK: END: Calculating sweep turn. 31 segments added to the turn debug: 737.959: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.959: TK: Eval flyby processing done debug: 737.959: TK: appending ehsi.mod_route debug: 737.960: TK: ================================================================================PROCESSING POINT 7, GBE== LNAV debug: 737.960: TK: BEGIN: Calculating Flyby params debug: 737.960: TK: Function was passed: 2 arguments debug: 737.961: TK: -58.514992575537 | -35.026496916029 | -58.464722 | -35.750833 | -58.029444 | -37.063889 debug: 737.961: TK: tc: 176.77621067921 tc2: 165.19041393291 debug: 737.961: TK: Turn direction is: -1 debug: 737.962: TK: Flyby evaluated to OK, calculating turn debug: 737.962: TK: turnpt lon/lat is -58.465035238067 | -35.746359914922 debug: 737.962: TK: SWEEP TURN: Lon: -58.465035238067 |Lat: -35.746359914922 |From: 176.74728040862 |To:165.19041393291 | Turning: -1 debug: 737.963: TK: Adding 4 segments to lah debug: 737.963: TK: END: Calculating sweep turn. 4 segments added to the turn debug: 737.963: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.964: TK: Eval flyby processing done debug: 737.964: TK: appending ehsi.mod_route debug: 737.964: TK: ================================================================================PROCESSING POINT 8, VOTRA== LNAV debug: 737.965: TK: BEGIN: Calculating Flyby params debug: 737.965: TK: Function was passed: 2 arguments debug: 737.965: TK: -58.463318517542 | -35.75514082121 | -58.029444 | -37.063889 | -57.576444 | -37.929833 debug: 737.966: TK: tc: 165.18959419912 tc2: 157.59701861617 debug: 737.966: TK: Turn direction is: -1 debug: 737.967: TK: Flyby evaluated to OK, calculating turn debug: 737.967: TK: turnpt lon/lat is -58.029444005999 | -37.06388898222 debug: 737.968: TK: SWEEP TURN: Lon: -58.029444005999 |Lat: -37.06388898222 |From: 164.93204928517 |To:157.59701861617 | Turning: -1 debug: 737.968: TK: Adding 2 segments to lah debug: 737.968: TK: END: Calculating sweep turn. 2 segments added to the turn debug: 737.969: TK: Done calculating flyby parameters, flyby result status was: ok debug: 737.969: TK: Eval flyby processing done debug: 737.970: TK: appending ehsi.mod_route debug: 737.970: TK: ================================================================================PROCESSING POINT 9, MDP== LNAV debug: 737.971: TK: ================================================================================PROCESSING POINT 10, #####== LNAV debug: 737.971: TK: ================================================================================PROCESSING POINT 11, R182J== LNAV debug: 737.971: TK: This is the last point debug: 737.972: TK: building routelist from: 11points debug: 737.972: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 737.973: TK: EXITING PROCESS ROUTE FUNCTION debug: 737.974: TK: ==================================================================================================== debug: 737.974: TK: EXITING PROCESS ROUTE FUNCTION debug: 737.974: TK: ==================================================================================================== debug: 737.975: TK: Exiting fmc.processActive() debug: 746.463: TK: route index is: 11 debug: 746.464: TK: WP R182J exists on this LSK line debug: 746.465: TK: Processing active route debug: 746.465: TK: PROCESS ACTIVE calling process_route(1) debug: 746.465: TK: ==================================================================================================== debug: 746.466: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 746.466: TK: ==================================================================================================== debug: 746.467: TK: BEGIN: Adding begin point to the source route debug: 746.467: TK: Origin runway exists debug: 746.467: TK: END: Adding begin point to the waypoint table. debug: 746.468: TK: Pre-processing conditionals for LL debug: 746.468: TK: Calculating turn direction from Begin tc1: 100.00824546814 to (467) tc2: 101.00824546814 debug: 746.468: TK: Done preprocessing conditionals for LL debug: 746.469: TK: Beginning auto-close/disco processing debug: 746.469: TK: Begin debug: 746.469: TK: done iterating for auto-close debug: 746.470: TK: Checking for Autoclose debug: 746.470: TK: Exiting autoclose() debug: 746.470: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 746.471: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 746.471: TK: Evaluating flyover for first point. debug: 746.471: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 746.472: TK: Turn to next is to the right debug: 746.472: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 746.472: TK: Next waypoint is outside the turn radius...continuing eval debug: 746.473: TK: Current heading is 100.00824546814 debug: 746.473: TK: Bearing to next is 101.00824546817 debug: 746.473: TK: Heading Change to next waypoint is: 1.0000000000335 degrees debug: 746.473: TK: No change made to route because of small course change, dontcha know debug: 746.474: TK: ================================================================================PROCESSING POINT 2, (467)== LNAV debug: 746.474: TK: BEGIN: Calculating Flyby params debug: 746.474: TK: Function was passed: 2 arguments debug: 746.475: TK: -58.531460400452 | -34.822234166645 | -58.522030968444 | -34.823739606486 | -58.465000 | -34.857500 debug: 746.475: TK: tc: 101.00824546817 tc2: 125.81750320488 debug: 746.475: TK: Turn direction is: 1 debug: 746.476: TK: Flyby evaluated to OK, calculating turn debug: 746.476: TK: turnpt lon/lat is -58.530591087001 | -34.822372988142 debug: 746.476: TK: SWEEP TURN: Lon: -58.530591087001 |Lat: -34.822372988142 |From: 101.00774906147 |To:125.81750320488 | Turning: 1 debug: 746.477: TK: Adding 9 segments to lah debug: 746.477: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 746.478: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.478: TK: Eval flyby processing done debug: 746.478: TK: appending ehsi.mod_route debug: 746.479: TK: ================================================================================PROCESSING POINT 3, EZE12== LNAV debug: 746.479: TK: BEGIN: Calculating Flyby params debug: 746.479: TK: Function was passed: 2 arguments debug: 746.480: TK: -58.514964416734 | -34.827925716273 | -58.465000 | -34.857500 | -58.398374 | -34.947185 debug: 746.480: TK: tc: 125.81346448602 tc2: 148.66659030593 debug: 746.480: TK: Turn direction is: 1 debug: 746.481: TK: Flyby evaluated to OK, calculating turn debug: 746.481: TK: turnpt lon/lat is -58.471510018653 | -34.853649036476 debug: 746.481: TK: SWEEP TURN: Lon: -58.471510018653 |Lat: -34.853649036476 |From: 125.78863907485 |To:148.66659030593 | Turning: 1 debug: 746.482: TK: Adding 9 segments to lah debug: 746.482: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 746.482: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.483: TK: Eval flyby processing done debug: 746.483: TK: appending ehsi.mod_route debug: 746.483: TK: ================================================================================PROCESSING POINT 4, D138J== LNAV debug: 746.484: TK: BEGIN: Calculating Flyby params debug: 746.484: TK: Function was passed: 2 arguments debug: 746.484: TK: -58.460832507031 | -34.863116663083 | -58.398374 | -34.947185 | -58.453656 | -34.976678 debug: 746.485: TK: tc: 148.66420626877 tc2: 236.92077220695 debug: 746.485: TK: Turn direction is: 1 debug: 746.485: TK: Flyby evaluated to OK, calculating turn debug: 746.485: TK: turnpt lon/lat is -58.418427082263 | -34.920216054237 debug: 746.486: TK: SWEEP TURN: Lon: -58.418427082263 |Lat: -34.920216054237 |From: 148.63994923506 |To:236.92077220695 | Turning: 1 debug: 746.486: TK: Adding 35 segments to lah debug: 746.486: TK: END: Calculating sweep turn. 35 segments added to the turn debug: 746.487: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.487: TK: Eval flyby processing done debug: 746.487: TK: appending ehsi.mod_route debug: 746.488: TK: ================================================================================PROCESSING POINT 5, D156J== LNAV debug: 746.488: TK: BEGIN: Calculating Flyby params debug: 746.488: TK: Function was passed: 2 arguments debug: 746.489: TK: -58.430650203166 | -34.964409972506 | -58.453656 | -34.976678 | -58.517478 | -34.990347 debug: 746.489: TK: tc: 236.93919004695 tc2: 255.33209760753 debug: 746.489: TK: Turn direction is: 1 debug: 746.490: TK: Flyby evaluated to OK, calculating turn debug: 746.490: TK: turnpt lon/lat is -58.448270714215 | -34.97380697105 debug: 746.490: TK: SWEEP TURN: Lon: -58.448270714215 |Lat: -34.97380697105 |From: 236.94928897338 |To:255.33209760753 | Turning: 1 debug: 746.491: TK: Adding 7 segments to lah debug: 746.491: TK: END: Calculating sweep turn. 7 segments added to the turn debug: 746.491: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.492: TK: Eval flyby processing done debug: 746.492: TK: appending ehsi.mod_route debug: 746.492: TK: ================================================================================PROCESSING POINT 6, R182J== LNAV debug: 746.493: TK: BEGIN: Calculating Flyby params debug: 746.493: TK: Function was passed: 2 arguments debug: 746.493: TK: -58.459865364314 | -34.978009548347 | -58.517478 | -34.990347 | -58.464722 | -35.750833 debug: 746.494: TK: tc: 255.3356551186 tc2: 176.77763420317 debug: 746.494: TK: Turn direction is: -1 debug: 746.495: TK: Flyby evaluated to OK, calculating turn debug: 746.495: TK: turnpt lon/lat is -58.47469077994 | -34.981187291146 debug: 746.495: TK: SWEEP TURN: Lon: -58.47469077994 |Lat: -34.981187291146 |From: 255.34415430288 |To:176.77763420317 | Turning: -1 debug: 746.496: TK: Adding 31 segments to lah debug: 746.496: TK: END: Calculating sweep turn. 31 segments added to the turn debug: 746.496: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.497: TK: Eval flyby processing done debug: 746.497: TK: appending ehsi.mod_route debug: 746.497: TK: ================================================================================PROCESSING POINT 7, GBE== LNAV debug: 746.498: TK: BEGIN: Calculating Flyby params debug: 746.498: TK: Function was passed: 2 arguments debug: 746.498: TK: -58.514992575537 | -35.026496916029 | -58.464722 | -35.750833 | -58.029444 | -37.063889 debug: 746.499: TK: tc: 176.77621067921 tc2: 165.19041393291 debug: 746.499: TK: Turn direction is: -1 debug: 746.500: TK: Flyby evaluated to OK, calculating turn debug: 746.500: TK: turnpt lon/lat is -58.465035238067 | -35.746359914922 debug: 746.500: TK: SWEEP TURN: Lon: -58.465035238067 |Lat: -35.746359914922 |From: 176.74728040862 |To:165.19041393291 | Turning: -1 debug: 746.501: TK: Adding 4 segments to lah debug: 746.501: TK: END: Calculating sweep turn. 4 segments added to the turn debug: 746.501: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.502: TK: Eval flyby processing done debug: 746.502: TK: appending ehsi.mod_route debug: 746.503: TK: ================================================================================PROCESSING POINT 8, VOTRA== LNAV debug: 746.503: TK: BEGIN: Calculating Flyby params debug: 746.503: TK: Function was passed: 2 arguments debug: 746.504: TK: -58.463318517542 | -35.75514082121 | -58.029444 | -37.063889 | -57.576444 | -37.929833 debug: 746.504: TK: tc: 165.18959419912 tc2: 157.59701861617 debug: 746.504: TK: Turn direction is: -1 debug: 746.505: TK: Flyby evaluated to OK, calculating turn debug: 746.505: TK: turnpt lon/lat is -58.029444005999 | -37.06388898222 debug: 746.505: TK: SWEEP TURN: Lon: -58.029444005999 |Lat: -37.06388898222 |From: 164.93204928517 |To:157.59701861617 | Turning: -1 debug: 746.506: TK: Adding 2 segments to lah debug: 746.506: TK: END: Calculating sweep turn. 2 segments added to the turn debug: 746.506: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.506: TK: Eval flyby processing done debug: 746.507: TK: appending ehsi.mod_route debug: 746.507: TK: ================================================================================PROCESSING POINT 9, MDP== LNAV debug: 746.507: TK: This is the last point debug: 746.508: TK: building routelist from: 9points debug: 746.508: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 746.509: TK: EXITING PROCESS ROUTE FUNCTION debug: 746.509: TK: ==================================================================================================== debug: 746.510: TK: PROCESS ACTIVE calling process_route() debug: 746.510: TK: ==================================================================================================== debug: 746.510: TK: BEGIN PROCESSING VNAV debug: 746.511: TK: ==================================================================================================== debug: 746.511: TK: Cruise altitude is set to: 33000 debug: 746.511: TK: Current altitude is: 50.752540588379 debug: 746.512: TK: ==================================================================================================== debug: 746.512: TK: PROCESSING DESCENT FUNCTION debug: 746.513: TK: ==================================================================================================== debug: 746.513: TK: No suitable E/D point found debug: 746.513: TK: ==================================================================================================== debug: 746.514: TK: PROCESSING CLIMB FUNCTION debug: 746.514: TK: ==================================================================================================== debug: 746.515: TK: Distance to 1500' AGL is estimated at: 4.2 NM debug: 746.515: TK: Starting elevation is: 62 debug: 746.516: TK: Cruise altitude is: 33000 debug: 746.516: TK: Assembling the restriction tables debug: 746.516: TK: inserting climb altitude restriction at: (467) debug: 746.517: TK: Restriction tables built: debug: 746.517: TK: Calculating dist2 and distFrom fields for restrictions debug: 746.518: TK: Duplicating altitude restrictions to the fmc.mod_restrictions.ap_climb table debug: 746.518: TK: ---------------------------------------------------------------------------------------------------- debug: 746.519: TK: VNAV CLIMB - Processing Point: [2] (467) debug: 746.519: TK: ---------------------------------------------------------------------------------------------------- debug: 746.520: TK: Current alt before iteration is: 112 debug: 746.520: TK: most restrictive target alt at (467) is 38000 debug: 746.521: TK: This waypoint is within the takeoff phase debug: 746.522: TK: Calculated altitude this point is: 282.7 ft debug: 746.522: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 746.523: TK: evaluating (467) for restriction of any type debug: 746.523: TK: >>>> Removing altitude restriction at (467) as we pass this point <<<< 0 restrictions left debug: 746.523: TK: evaluating (467) for restriction of any type debug: 746.524: TK: ---------------------------------------------------------------------------------------------------- debug: 746.524: TK: VNAV CLIMB - Processing Point: [3] EZE12 debug: 746.524: TK: ---------------------------------------------------------------------------------------------------- debug: 746.525: TK: Current alt before iteration is: 283 debug: 746.525: TK: most restrictive target alt at EZE12 is 38000 debug: 746.526: TK: This waypoint is within the takeoff phase debug: 746.526: TK: Calculated altitude this point is: 1531.9 ft debug: 746.526: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 746.527: TK: evaluating EZE12 for restriction of any type debug: 746.527: TK: evaluating EZE12 for restriction of any type debug: 746.528: TK: ---------------------------------------------------------------------------------------------------- debug: 746.528: TK: VNAV CLIMB - Processing Point: [4] D138J debug: 746.528: TK: ---------------------------------------------------------------------------------------------------- debug: 746.529: TK: Current alt before iteration is: 1532 debug: 746.529: TK: most restrictive target alt at D138J is 38000 debug: 746.529: TK: This WP is out of the takeoff phase debug: 746.530: TK: Able altitude this waypoint is: 6730 debug: 746.530: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 746.531: TK: We are not going over 10000' during this iteration debug: 746.531: TK: evaluating crossover criteria, currentAlt = 6729.7230917624 debug: 746.531: TK: crossover criteria not met debug: 746.532: TK: Evaluating altitudes before writing debug: 746.532: TK: Current altitude before writing is: 6729.7230917624 debug: 746.533: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 746.533: TK: Current Alt after writing is 6729.7230917624 | 6729.7230917624 debug: 746.533: TK: VNAV target speed this waypoint: 250 debug: 746.534: TK: evaluating D138J for restriction of any type debug: 746.534: TK: ---------------------------------------------------------------------------------------------------- debug: 746.535: TK: VNAV CLIMB - Processing Point: [5] D156J debug: 746.535: TK: ---------------------------------------------------------------------------------------------------- debug: 746.535: TK: Current alt before iteration is: 6730 debug: 746.536: TK: most restrictive target alt at D156J is 38000 debug: 746.536: TK: This WP is out of the takeoff phase debug: 746.536: TK: Able altitude this waypoint is: 9252 debug: 746.537: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 746.537: TK: We are not going over 10000' during this iteration debug: 746.537: TK: evaluating crossover criteria, currentAlt = 9251.9182254506 debug: 746.538: TK: crossover criteria not met debug: 746.538: TK: Evaluating altitudes before writing debug: 746.539: TK: Current altitude before writing is: 9251.9182254506 debug: 746.539: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 746.539: TK: Current Alt after writing is 9251.9182254506 | 9251.9182254506 debug: 746.540: TK: VNAV target speed this waypoint: 250 debug: 746.540: TK: evaluating D156J for restriction of any type debug: 746.541: TK: ---------------------------------------------------------------------------------------------------- debug: 746.541: TK: VNAV CLIMB - Processing Point: [6] R182J debug: 746.541: TK: ---------------------------------------------------------------------------------------------------- debug: 746.542: TK: Current alt before iteration is: 9252 debug: 746.542: TK: most restrictive target alt at R182J is 38000 debug: 746.543: TK: This WP is out of the takeoff phase debug: 746.543: TK: Able altitude this waypoint is: 11263 debug: 746.543: TK: We are crossing over the 10k line debug: 746.544: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 746.544: TK: Able alt from 10k is: 11187.025594931 debug: 746.545: TK: evaluating crossover criteria, currentAlt = 11187.025594931 debug: 746.545: TK: crossover criteria not met debug: 746.545: TK: Evaluating altitudes before writing debug: 746.546: TK: Current altitude before writing is: 11187.025594931 debug: 746.546: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 746.547: TK: Current Alt after writing is 11187.025594931 | 11187.025594931 debug: 746.547: TK: VNAV target speed this waypoint: 292 debug: 746.548: TK: evaluating R182J for restriction of any type debug: 746.548: TK: ---------------------------------------------------------------------------------------------------- debug: 746.548: TK: VNAV CLIMB - Processing Point: [7] GBE debug: 746.549: TK: ---------------------------------------------------------------------------------------------------- debug: 746.549: TK: Current alt before iteration is: 11187 debug: 746.550: TK: most restrictive target alt at GBE is 38000 debug: 746.550: TK: This WP is out of the takeoff phase debug: 746.550: TK: Able alt is: 26921.762227327 debug: 746.551: TK: Switchover alt is: 27964.473208432 debug: 746.551: TK: evaluating crossover criteria, currentAlt = 26921.762227327 debug: 746.552: TK: crossover criteria not met debug: 746.552: TK: Evaluating altitudes before writing debug: 746.552: TK: Current altitude before writing is: 26921.762227327 debug: 746.553: TK: evalClimbTargetSpeed. Mode is: ias econ debug: 746.553: TK: Current Alt after writing is 26921.762227327 | 26921.762227327 debug: 746.554: TK: VNAV target speed this waypoint: 292 debug: 746.554: TK: evaluating GBE for restriction of any type debug: 746.554: TK: ---------------------------------------------------------------------------------------------------- debug: 746.555: TK: VNAV CLIMB - Processing Point: [8] VOTRA debug: 746.555: TK: ---------------------------------------------------------------------------------------------------- debug: 746.556: TK: Current alt before iteration is: 26922 debug: 746.556: TK: most restrictive target alt at VOTRA is 38000 debug: 746.557: TK: This WP is out of the takeoff phase debug: 746.557: TK: Able alt is: 35015.583478362 debug: 746.557: TK: Switchover alt is: 27964.473208432 debug: 746.558: TK: We have reached the TOC debug: 746.558: TK: a: 46.059360802413 debug: 746.559: TK: Climb distance is: 112.64304918668 debug: 746.559: TK: evaluating crossover criteria, currentAlt = 33000 debug: 746.559: TK: crossover criteria not met debug: 746.560: TK: Evaluating altitudes before writing debug: 746.560: TK: Current altitude before writing is: 33000 debug: 746.561: TK: evalClimbTargetSpeed. Mode is: mach econ debug: 746.561: TK: Current Alt after writing is 33000 | 33000 debug: 746.562: TK: VNAV target speed this waypoint: 1 debug: 746.562: TK: evaluating VOTRA for restriction of any type debug: 746.562: TK: We reached TOC, breaking out of the iterator for climb processing debug: 746.563: TK: Calling process_enroute() debug: 746.563: TK: ==================================================================================================== debug: 746.564: TK: PROCESSING ENROUTE FUNCTION debug: 746.564: TK: ==================================================================================================== debug: 746.564: TK: Process missed approach has run debug: 746.565: TK: about to draw green circles debug: 746.565: TK: Draw ing T/C circle debug: 746.566: TK: 112.64304918668 1 debug: 746.566: TK: DONE PROCESSING VNAV debug: 746.566: TK: ==================================================================================================== debug: 746.567: TK: VNAV calling process_route(1) debug: 746.567: TK: ==================================================================================================== debug: 746.568: TK: PROCESSING ROUTE with REPROCESS = 1 debug: 746.568: TK: ==================================================================================================== debug: 746.568: TK: BEGIN: Adding begin point to the source route debug: 746.569: TK: Origin runway exists debug: 746.569: TK: END: Adding begin point to the waypoint table. debug: 746.570: TK: Pre-processing conditionals for LL debug: 746.570: TK: Calculating turn direction from Begin tc1: 100.00824546814 to (467) tc2: 101.00824546814 debug: 746.570: TK: Done preprocessing conditionals for LL debug: 746.571: TK: Beginning auto-close/disco processing debug: 746.571: TK: Begin debug: 746.572: TK: done iterating for auto-close debug: 746.572: TK: Checking for Autoclose debug: 746.573: TK: Exiting autoclose() debug: 746.573: TK: Conditional Preprocessing done, calculating ehsi.mod_route_ll debug: 746.574: TK: ================================================================================PROCESSING POINT 1, Begin== LNAV debug: 746.574: TK: Evaluating flyover for first point. debug: 746.574: TK: ---EVALUATING FLY-OVER PARAMS for point 1 debug: 746.575: TK: Turn to next is to the right debug: 746.575: TK: Centerpoint for turn is: -58.536003635061 | -34.843362867344 debug: 746.576: TK: Next waypoint is outside the turn radius...continuing eval debug: 746.576: TK: Current heading is 100.00824546814 debug: 746.576: TK: Bearing to next is 101.00824546817 debug: 746.577: TK: Heading Change to next waypoint is: 1.0000000000335 degrees debug: 746.577: TK: No change made to route because of small course change, dontcha know debug: 746.578: TK: ================================================================================PROCESSING POINT 2, (467)== LNAV debug: 746.578: TK: BEGIN: Calculating Flyby params debug: 746.578: TK: Function was passed: 2 arguments debug: 746.579: TK: -58.531460400452 | -34.822234166645 | -58.522030968444 | -34.823739606486 | -58.465000 | -34.857500 debug: 746.579: TK: tc: 101.00824546817 tc2: 125.81750320488 debug: 746.580: TK: Turn direction is: 1 debug: 746.580: TK: Flyby evaluated to OK, calculating turn debug: 746.580: TK: turnpt lon/lat is -58.530591087001 | -34.822372988142 debug: 746.581: TK: SWEEP TURN: Lon: -58.530591087001 |Lat: -34.822372988142 |From: 101.00774906147 |To:125.81750320488 | Turning: 1 debug: 746.581: TK: Adding 9 segments to lah debug: 746.582: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 746.582: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.582: TK: Eval flyby processing done debug: 746.583: TK: appending ehsi.mod_route debug: 746.583: TK: ================================================================================PROCESSING POINT 3, EZE12== LNAV debug: 746.584: TK: BEGIN: Calculating Flyby params debug: 746.584: TK: Function was passed: 2 arguments debug: 746.584: TK: -58.514964416734 | -34.827925716273 | -58.465000 | -34.857500 | -58.398374 | -34.947185 debug: 746.585: TK: tc: 125.81346448602 tc2: 148.66659030593 debug: 746.585: TK: Turn direction is: 1 debug: 746.586: TK: Flyby evaluated to OK, calculating turn debug: 746.586: TK: turnpt lon/lat is -58.471510018653 | -34.853649036476 debug: 746.586: TK: SWEEP TURN: Lon: -58.471510018653 |Lat: -34.853649036476 |From: 125.78863907485 |To:148.66659030593 | Turning: 1 debug: 746.587: TK: Adding 9 segments to lah debug: 746.587: TK: END: Calculating sweep turn. 9 segments added to the turn debug: 746.588: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.588: TK: Eval flyby processing done debug: 746.588: TK: appending ehsi.mod_route debug: 746.589: TK: ================================================================================PROCESSING POINT 4, D138J== LNAV debug: 746.589: TK: BEGIN: Calculating Flyby params debug: 746.590: TK: Function was passed: 2 arguments debug: 746.590: TK: -58.460832507031 | -34.863116663083 | -58.398374 | -34.947185 | -58.453656 | -34.976678 debug: 746.590: TK: tc: 148.66420626877 tc2: 236.92077220695 debug: 746.591: TK: Turn direction is: 1 debug: 746.591: TK: Flyby evaluated to OK, calculating turn debug: 746.592: TK: turnpt lon/lat is -58.418427082263 | -34.920216054237 debug: 746.592: TK: SWEEP TURN: Lon: -58.418427082263 |Lat: -34.920216054237 |From: 148.63994923506 |To:236.92077220695 | Turning: 1 debug: 746.592: TK: Adding 35 segments to lah debug: 746.593: TK: END: Calculating sweep turn. 35 segments added to the turn debug: 746.593: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.594: TK: Eval flyby processing done debug: 746.594: TK: appending ehsi.mod_route debug: 746.594: TK: ================================================================================PROCESSING POINT 5, D156J== LNAV debug: 746.595: TK: BEGIN: Calculating Flyby params debug: 746.595: TK: Function was passed: 2 arguments debug: 746.596: TK: -58.430650203166 | -34.964409972506 | -58.453656 | -34.976678 | -58.517478 | -34.990347 debug: 746.596: TK: tc: 236.93919004695 tc2: 255.33209760753 debug: 746.596: TK: Turn direction is: 1 debug: 746.597: TK: Flyby evaluated to OK, calculating turn debug: 746.597: TK: turnpt lon/lat is -58.448270714215 | -34.97380697105 debug: 746.598: TK: SWEEP TURN: Lon: -58.448270714215 |Lat: -34.97380697105 |From: 236.94928897338 |To:255.33209760753 | Turning: 1 debug: 746.598: TK: Adding 7 segments to lah debug: 746.598: TK: END: Calculating sweep turn. 7 segments added to the turn debug: 746.599: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.599: TK: Eval flyby processing done debug: 746.599: TK: appending ehsi.mod_route debug: 746.600: TK: ================================================================================PROCESSING POINT 6, R182J== LNAV debug: 746.600: TK: BEGIN: Calculating Flyby params debug: 746.601: TK: Function was passed: 2 arguments debug: 746.601: TK: -58.459865364314 | -34.978009548347 | -58.517478 | -34.990347 | -58.464722 | -35.750833 debug: 746.602: TK: tc: 255.3356551186 tc2: 176.77763420317 debug: 746.602: TK: Turn direction is: -1 debug: 746.602: TK: Flyby evaluated to OK, calculating turn debug: 746.603: TK: turnpt lon/lat is -58.474691425497 | -34.981187429473 debug: 746.603: TK: SWEEP TURN: Lon: -58.474691425497 |Lat: -34.981187429473 |From: 255.34415467297 |To:176.77763420317 | Turning: -1 debug: 746.604: TK: Adding 31 segments to lah debug: 746.604: TK: END: Calculating sweep turn. 31 segments added to the turn debug: 746.604: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.605: TK: Eval flyby processing done debug: 746.605: TK: appending ehsi.mod_route debug: 746.606: TK: ================================================================================PROCESSING POINT 7, GBE== LNAV debug: 746.606: TK: BEGIN: Calculating Flyby params debug: 746.607: TK: Function was passed: 2 arguments debug: 746.607: TK: -58.514992613031 | -35.02649637093 | -58.464722 | -35.750833 | -58.029444 | -37.063889 debug: 746.607: TK: tc: 176.7762107007 tc2: 165.19041393291 debug: 746.608: TK: Turn direction is: -1 debug: 746.608: TK: Flyby evaluated to OK, calculating turn debug: 746.609: TK: turnpt lon/lat is -58.465035233341 | -35.746359982418 debug: 746.609: TK: SWEEP TURN: Lon: -58.465035233341 |Lat: -35.746359982418 |From: 176.74728040584 |To:165.19041393291 | Turning: -1 debug: 746.609: TK: Adding 4 segments to lah debug: 746.610: TK: END: Calculating sweep turn. 4 segments added to the turn debug: 746.610: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.611: TK: Eval flyby processing done debug: 746.611: TK: appending ehsi.mod_route debug: 746.612: TK: ================================================================================PROCESSING POINT 8, VOTRA== LNAV debug: 746.612: TK: BEGIN: Calculating Flyby params debug: 746.612: TK: Function was passed: 2 arguments debug: 746.613: TK: -58.463318538605 | -35.755140756565 | -58.029444 | -37.063889 | -57.576444 | -37.929833 debug: 746.613: TK: tc: 165.18959421141 tc2: 157.59701861617 debug: 746.614: TK: Turn direction is: -1 debug: 746.614: TK: Flyby evaluated to OK, calculating turn debug: 746.614: TK: turnpt lon/lat is -58.029444005999 | -37.06388898222 debug: 746.615: TK: SWEEP TURN: Lon: -58.029444005999 |Lat: -37.06388898222 |From: 164.93204928515 |To:157.59701861617 | Turning: -1 debug: 746.615: TK: Adding 2 segments to lah debug: 746.616: TK: END: Calculating sweep turn. 2 segments added to the turn debug: 746.616: TK: Done calculating flyby parameters, flyby result status was: ok debug: 746.617: TK: Eval flyby processing done debug: 746.617: TK: appending ehsi.mod_route debug: 746.617: TK: ================================================================================PROCESSING POINT 9, MDP== LNAV debug: 746.618: TK: This is the last point debug: 746.618: TK: building routelist from: 9points debug: 746.619: TK: ***************************** PRIMARY LNAV ITERATIONS COMPLETE *************************************** debug: 746.619: TK: EXITING PROCESS ROUTE FUNCTION debug: 746.620: TK: ==================================================================================================== debug: 746.620: TK: EXITING PROCESS ROUTE FUNCTION debug: 746.620: TK: ==================================================================================================== debug: 746.621: TK: Exiting fmc.processActive() debug: 748.015: TK: EXEC pressed debug: 748.016: TK: Setting Altitude Target debug: 748.016: TK: Setting speed target debug: 748.017: TK: winning target speed is: debug: 748.017: TK: 250 debug: 748.018: TK: Route Data Exported debug: 748.019: TK: exiting the EXEC function debug: 926.491: TK: Setting speed target debug: 926.492: TK: winning target speed is: debug: 926.493: TK: 250 debug: 1452.780: TK: 11.462061519665 debug: 1464.167: TK: Sequencing (467) debug: 1464.168: TK: building routelist from: 8points debug: 1464.168: TK: Setting Altitude Target debug: 1464.169: TK: Setting speed target debug: 1464.169: TK: winning target speed is: debug: 1464.170: TK: 250 debug: 1497.341: TK: Setting speed target debug: 1497.342: TK: winning target speed is: debug: 1497.342: TK: 250 debug: 1520.465: TK: Sequencing EZE12 debug: 1520.465: TK: building routelist from: 7points debug: 1520.465: TK: Setting Altitude Target debug: 1520.466: TK: Setting speed target debug: 1520.467: TK: winning target speed is: debug: 1520.467: TK: 250 debug: 1601.446: TK: Sequencing D138J debug: 1601.446: TK: building routelist from: 6points debug: 1601.447: TK: Setting Altitude Target debug: 1601.447: TK: Setting speed target debug: 1601.448: TK: winning target speed is: debug: 1601.448: TK: 250 debug: 1639.022: TK: Sequencing D156J debug: 1639.022: TK: building routelist from: 5points debug: 1639.023: TK: Setting Altitude Target debug: 1639.023: TK: Setting speed target debug: 1639.024: TK: winning target speed is: debug: 1639.024: TK: 250 debug: 1676.463: TK: Sequencing R182J debug: 1676.464: TK: building routelist from: 4points debug: 1676.464: TK: Setting Altitude Target debug: 1676.465: TK: Setting speed target debug: 1676.465: TK: winning target speed is: debug: 1676.466: TK: 250 debug: 1685.199: TK: Passed thru hardSpeedAlt from below debug: 1685.200: TK: Setting speed target debug: 1685.200: TK: winning target speed is: debug: 1685.201: TK: 291.60867015928 error: 1798.357: RunLuaFunction(gfx): OnDraw_Gauges_3D: stack overflow error: 1798.416: RunLuaFunction(gui): bake_trigger: stack overflow error: 1798.418: RunLuaFunction(gui): bake_ehsi: stack overflow error: 1798.442: RunLuaFunction(gfx): bake_wx_display: stack overflow