Search the Community
Showing results for tags 'solved'.
-
Dear all, I've stumbled with the following bug quite frequently, say 1 in 5 take offs: on take-off, once I enable TO/GO mode, with A/T and F/S enabled (but with both CMD/A and CMD/B still off), the yoke turns all the way left. Has anyone else experienced something similar? At first I thought it could be a problem with the flight plan (eventhough F/D was still not enabled) but even the flight route looks fine, with the first points in about the same heading. I can kind of solve it by aborting takeoff, disabling A/T and F/D, doing everything again, but it's not ideal. Thanks in advance for any feedback I'm attaching two screenshots, one just some seconds after TO/GA mode is enabled, where you can clearly see the yoke going by itself all the way left; and a second one with the flight plan (just in case this could explain something). I've ruled out a problem with the joystick: only happens with this model and always during takeoff. Best, Agustín
-
Hi IXEG experts, maybe you have an idea :-) Yesterday evening I made a flight from LGSK to EDDS, everything starts well. 20 miles before EDDS there was a snow storm but I catched ILS, still okay. But then the nose gear didn't went down, I tried it serveral times. before I was able to accerlate for a Go around the planes turns right over the wing and crashed. XP11 told me too much ice on the wings *grhh* First, I know I have to train the emergency procedures, haha. But, more important, are the anti-ice switches working in version 1.2? Or are they only for nice to have? Did someone made the same experiences? Thx
-
I just bought this amazing plane. Thank you for creating It. On the right-hand side in the cockpit, there is not transparent square on the window (please see attached screengrab) Reinstallation didn't help. I'm running X-Plane 11 on an iMac. Plugins: SkyMaxx Pro v4.6, Real Weather Connector. Could you please help me solve the problem.
-
solved Flashing engine emblems and eyebrow windows on outside view
t4murphy posted a topic in Bug Reports
On external model I am seeing the engine warning signs or labels floating as I pan around. Also appears the eyebrow windows are also. Other then that, great AC especially with the remote CDU now available from green arc studios. -
So I was flying (this was my first time touching the IXEG 737 in the XP11.30 beta) from RJBB (Kansai) to RJAA (Narita) and out of nowhere during climb the cockpit started giving out these weird flickering textures with about 1 second intervals between them... Surprisingly, no one has ever reported this before on the 11.3 beta at all from what I saw online (please correct me if I'm wrong). Since I had no access to recording software during my encounter, here are some screenshots of this incident taking place... Does this seem to be a bug or did I do something wrong?
-
Today I tried (xp11.26) a default ground services pushback / nose left. Pushback was straight back without the nose left. Also the rotating beacons are flashing white rather than red.
-
I'm attempting to install Version 1.21 on X-plane 11 and getting a missing component error message. See image below. Does anyone know what's wrong here?
-
Hello there! I've this amazing plane few weeks ago and I'am very happy with this. Today I've started x-plane and I've load the plane and FMC doesn't respond. Its starts with the FMC and ACMS options available. I click in FMC but it doesn't work. I've followed all the checklist procedure but It doesn't work. I've also reinitialized the x-plane three times but it doesn't work. I haven't installed any new addons. Please, could you help me?. Thanks a lot and regards!!
-
After installing the v1.2 version in x-plane 11 I can't rotate many knobs, like altitude, anymore. I can see the bend arrows sometimes when hovering over the knobs or according digits, but nothing happens whatever I try. I tried switching from windowed mode to full screen mode without results, reinstalled the plane, still nothing. I'm running X-plane on a 4K monitor with 3840x 2160 setting. Any help would be appreciated.
-
I have a BUG or an issue with IXEG 737-300. Upon starting battery loud bell noise started ringing. The noise increases when I am on outside view. I tried googling the problem but I never found the solution. As a result the plane don't taxi fast (very slow motion) even on full throttle. Upon taking off the plane crashes before reaching 10,000 feet. Please, I need help in resolving this issue . Thank you. Name of product(s) - Put N/A for none: IXEG 737 Classic
-
Hi there, I have been able to see textures through the model of the aircraft when on the outside view. I am using XPlane 11.25r2 Attached are some screenshots to better describe the issue.
-
To the ixeg team, the fps seems to fluctuate, now this is happening in a new windows and x plane installation. This fluctuation is extremely fast and it required me to use the camera in slow motion mode to get the numbers. It’s constantly cycling between 43 to 36 FPS . This causes a stutter like experience. Can you help me with a fix, it’s really annoying. A2F4629B-7A8A-4408-93F6-F7D72FDFD818.MOV -
Hello, I noticed on a flight to KBOS from KATL that I was not able to intercept the localizer. The airport is by MisterX and confirmed it does work in xplane 11 with other aircraft. When lining up to runway 22L, I have freq 110.3 and a course heading of 216 degrees entered. I hit the LOC button but the aircraft will not establish itself on the localizer. I've attempted to enter at 3,000, 2,500, and 1,700 feet but still not avail. Im running latest xplane version and latest 1.2 IXEG 733
-
solved Field of view gets reset when returning to cockpit ziew
Blahmeh posted a topic in Bug Reports
When I am in the cockpit view the default zoom view is fine (70 or 80), but when I press "C" to go to the external view, then "W" to go back to the cockpit view, my field of view is reset again back to a small value which I find uncomfortable (about 60), I have only noticed this in the IXEG. -
My X-Plane is crashing during the flights, I am can't finish them. I bought the aircraft for study purpose and I'm really trying hard to pass over its limitations, and enjoy it, but it's being a hard task. Could someone help? Log.txt
-
I'm having an issue with the engine starters with IXEG v1.2 and XP 11.11 final. When in the process of starting the engines, I turn an engine starter (both engines have the same problem) to GRD, N2 spins up, I introduce fuel at the appropriate time, and the engine starts up. However, the starter does not automatically disengage once N2 hits the appropriate threshold. The "Starter Valve Open" light remains on, and the physical switch on the overhead panel stays on GRD position, and N2 spins up to the mid 70s. I can manually turn off the starter switch, N2 returns to idle, and there's no issues after that. This problem occurs with both pulling the switch with the mouse, as well as triggering the X-Plane command "Engage starter #1 / #2" with the keyboard or a joystick button. I've only started using the IXEG 733 with XP 11.11 so I'm not sure if the problem existed in earlier versions. The last time I flew it was with XP 10.51 and this problem did not exist.
-
I just purchased the IXEG yesterday and I couldn't help but notice issues with the cockpit textures and stickers on the engines showing through the fuselage, I've seen this issue in multiple liveries. Is there a fix for this?
-
hi @Litjan, thx for the Update but i have now really really Bad FPS with this update. before evrytime over 40 - 60 and now 20 to 37 FPS tats really hard. so you can give me the Version before. the Plane is really Unflyable by complex Airports! Thx Motherboard: CPU Typ HexaCore Intel Core i7 8700k, 4700 MHz (47 x 100) Motherboard Name Asus Z370-F Gaming Motherboard Chipsatz Intel Union Point Z370, Intel Coffee Lake-S Arbeitsspeicher 24512 MB (DDR4 SDRAM) DIMM1: Kingston HyperX KHX2133C14D4/4G 4 GB DDR4-2133 DDR4 SDRAM (16-14-14-35 @ 1067 MHz) (15-14-14-35 @ 1067 MHz) (14-14-14-35 @ 1067 MHz) (13-13-13-33 @ 1000 MHz) (12-12-12-31 @ 923 MHz) (11-11-11-28 @ 846 MHz) (9-9-9-23 @ 692 MHz) DIMM2: Kingston HyperX KHX2133C14/8G 8 GB DDR4-2133 DDR4 SDRAM (16-14-14-35 @ 1066 MHz) (15-14-14-35 @ 1066 MHz) (14-14-14-35 @ 1066 MHz) (13-13-13-33 @ 991 MHz) (12-12-12-30 @ 914 MHz) (11-11-11-28 @ 838 MHz) (9-9-9-23 @ 686 MHz) DIMM3: Kingston HyperX KHX2133C14D4/4G 4 GB DDR4-2133 DDR4 SDRAM (16-14-14-35 @ 1067 MHz) (15-14-14-35 @ 1067 MHz) (14-14-14-35 @ 1067 MHz) (13-13-13-33 @ 1000 MHz) (12-12-12-31 @ 923 MHz) (11-11-11-28 @ 846 MHz) (9-9-9-23 @ 692 MHz) DIMM4: Kingston HyperX KHX2133C14/8G 8 GB DDR4-2133 DDR4 SDRAM (16-14-14-35 @ 1066 MHz) (15-14-14-35 @ 1066 MHz) (14-14-14-35 @ 1066 MHz) (13-13-13-33 @ 991 MHz) (12-12-12-30 @ 914 MHz) (11-11-11-28 @ 838 MHz) (9-9-9-23 @ 686 MHz) BIOS Typ AMI (12/01/2017) Anschlüsse (COM und LPT) Kommunikationsanschluss (COM1) Anzeige: Grafikkarte GeForce GTX 1080 (8 GB) 3D-Beschleuniger nVIDIA GeForce GTX 1080 Monitor LG UltraWide (270249352) Monitor Samsung SyncMaster S24D390 [24" LCD] (2505808662329) Monitor Samsung SyncMaster S24D390 [24" LCD] (2519808662329) Multimedia: Soundkarte nVIDIA HDMI/DP @ nVIDIA GP104 - High Definition Audio Controller Soundkarte Realtek ALC S1220A @ Intel Union Point PCH - High Definition Audio Controller (Audio, Voice, Speech) Datenträger: IDE Controller Standardmäßiger SATA AHCI- Controller Massenspeicher Controller Microsoft-Controller für Speicherplätze Festplatte PNY CS1311 480GB SSD (480 GB, SATA-III) Festplatte SanDisk SDSSDP256G (256 GB, SATA-III) Festplatte ST3000DM001-1CH166 (3 TB, 7200 RPM, SATA-III) Festplatte WDC WD10EARX-00N0YB0 (1 TB, SATA-III) S.M.A.R.T. Festplatten-Status OK Partitionen: C: (NTFS) 237.9 GB (129.2 GB frei) D: (NTFS) 931.5 GB (923.2 GB frei) E: (NTFS) 447.1 GB (110.5 GB frei) F: (NTFS) 2794.4 GB (45.1 GB frei) Speicherkapazität 4410.9 GB (1207.9 GB frei) Eingabegeräte: Tastatur HID-Tastatur Tastatur HID-Tastatur Tastatur HID-Tastatur Maus HID-konforme Maus Maus HID-konforme Maus Game Controller Microsoft PC-joystick driver Game Controller Microsoft PC-joystick driver Netzwerk: Primäre IP-Adresse 192.168.178.53 Primäre MAC-Adresse 2C-FD-A1-71-65-2E Netzwerkkarte Intel(R) Ethernet Connection (2) I219-V (192.168.178.53)
-
Using X-plane/IXEG 737 on my win 10 laptop and cant get the preference options to show, they work fine in my PC Desktop application. Anyone have similar issue/fix Steve
-
I found an important Bug on the 737 Startup procedure, the N1 are to slow on Startup must be on N2 @25% - 27% N1 between 2,9%-3,1% . and the enigne start Switch to fast to off normaly @14-15% N1 . hope this help best regards
-
prior to touch down (retard) I manualy moved the throttles to full off plus switches like AUTO Throttle off-- FD off -- Autopilot Off - but the throttle just moves up to 70% N1 and refuses the Landing in as much the crash is programed. Does that each and every time. Last airport was EHAM Rwy 27 and the ILS Freq. 111.55/267 deg. dialed in but not present on the main display.
-
Hi, I have version 1.21. Each time I load up the plane I get loud buzzer sound that stops when I either connect to ground power or start APU. Is there a way to get rid of this? Tom
-
Dear IXEG First i respect your hard work and love it realy more then my Wife First thing is the missing Pitot on the tail Second the APU inlet is on the wrong Position must be a bit deeper ... something is worng with the winglets are too Long nut sure or fat.. on the Classic is only 2,10m high I have an bug in the VC side window (only with Clouds ...) Best regards
-
Hello, Sorry if this has been asked before, I have searched the forum about this, but without luck so far. I have a question about how taxi and runway turnoff lights work together. With taxi light OFF: - If I turn one runway turnoff light on (left or right), then it illuminates the side of the aircraft as I expect it to do. - If I turn both runway turnoff lights on, then it doesn't illuminate any side anymore, but it seems like the taxi light is turned on instead. With taxi light ON: - If I turn one runway turnoff light on (left or right), then it turns taxi light off and illuminates only the side of the aircraft. - If I turn both runway turnoff lights on, then it doesn't illuminate any side but it seems like only the taxi light is turned on. Is this normal behaviour? Could someone explain me how I should use these lights together, or maybe they are not meant to be use at the same time? I use the last version of IXEG and Gizmo.. PS: I can also see that only one wing (left) is illuminated when I turn the wing light on, so maybe there is something wrong on my computer only. Thanks in advance. Cheers Sylvain
-
Hi So I updated to 1.21, and noticed that I need more thrust than usual to get her to move. As much as 42% N2 was needed to just keep her moving at steady speed (slightly uphill) in the image attatched. Airport is ENBR (Also, does the "older" engine switch between 1 and 2? Really slow respons from the left engine this flight, while another day it was the right engine)
