Search the Community
Showing results for tags 'fmc'.
-
Check the bug with text on prog page
-
I've tried this several times, approaches to 20 at PHOG, and 09 at KSAN, all with the same results. The aircraft will not follow an FMC directed approach. On a Mac, If it makes any difference. I've decided it's best to go back to the 1.0.5 version for the time being. KSAN GizmoLog.txt
-
It is great that we can insert speeds but they don't get updated in legs page
-
Hello All, Hello all! I was programming the FMC in the 733, and when I went to select the arrival (not using a STAR, so just selecting the runway), I get a popup. After that, the RSK that I had used to try and select the runway dosent work for anything else.
-
Hi. Will we be able to add custom waypoints in the FMC sometime? Or is this not featured in the real 737 CL Example: ROKIM360/05 (Where ROKIM is the waypoint, 360 is bearing, and 05 is distance)? Or: RW06L/+2 Thanks!
-
I made a flight from EDDW to EGSS. STAR at EGSS is ABBOT1C. ILS Approach 04. The left side of the attached picture shows the approach chart, on the right side you see the approach in the FMC! Seems, that the FMC want to show, how to fly an acrobatic challenge with the IXEG 733 (used Navigraph Data cycle 5/2016) Chimo
-
Hi, yesterday I had to declare a missed approach due to this strange behaviour of LNAV on the final approach VORD27 to rwy27 at LGIR. The procedure starts at GONSO with a 12nm DME arc IRA VOR at 3000ft then, after intercepting the 080° RDL IRA, the final turn is initiated at 2500ft to catch CRS 270° to be followed at 2500ft until D7.0, where the final stabilized approach begins until MAPT (1100ft). Well it happened that I kept LNAV on to follow the DME arc and the final alignment to CRS 270°, but then at D7.0 a right turn was initiated bringing the plane totally off track. Can anybody reproduce this to see if I did something wrong? (I did twice with the same outcome). Last AIRAC Aerosoft NavDataPro cycle 1605 w/ v1.0.4 Thanks! Cris GizmoLog.txt
-
-
hi guys, i just noticed that on the DEP/ARR menu in the fmc, there is, once you choose a SID odr STAR, the appropriate runway and the respective TRANS noc chance to change the choosen items. As far as i know, the lowest LSK on the left side should provide an "ERASE" funcitionality. Currently, there seemes no way to change the values you have choosen, only via leaving the ARRIVALS/DEPARTURES page and call the page up again.
-
wrong RTE page prompts for Activated route (TAKEOFF, PERF INIT)
xplana posted a topic in Bug Reports
After setting up the route on the RTE Page, you ACTIVATE the route, just as shown here (this is fine with the IXEG FMS): the next that should happen is a change of the ACTIVATE LSK, it should change/beeing replaced to eigther "PERF INIT" or "TAKEOFF". - should change to "PERF INIT" when the required performance data is incomplete. - should change to "TAKEOFF" when the required performance data is complete. The IXEG FMS alsways changes to button state to "TAKEOFF", ignoring wether performance data are entered or not. Manual: -
Version 1.0.1
259 downloads
This is a quick and dirty Windows Console application i made in order to create Company Routes for the IXEG B737-300. To get company routes which you can open by the FMC you could also use a simple text editor, however it was a tedious process so i decided to do this converter. All you have to do is to copy the route you are going to fly to the clipboard, only its waypoints and airways like this for example "XENAK UM985 LEDRI UL140 ALAMU DCT TEGRI UL605 NEKUL", then run the "route to ixeg fmc.exe" which will now ask you for the ORIGIN and Destination Airport (4-Letter ICAO Format in CAPITALS for each), once you entered those its done and there should be a coroute file ready to be opened by the FMC of the IXEG B737-300 If your ORIGIN is, as in this example, LROP and your Destination is LTBA just enter LROPLTBA into the "CO ROUTE" line of the FMC and the route will be loaded. But first of all for setting it up you must check and enter the location of your IXEG Coroute file folder in the Settings.ini of the application. Mine is "D:/Program Files (x86)/Steam/SteamApps/common/X-Plane 10/Aircraft/X-Aviation/IXEG 737 Classic/coroutes/" so i entered it as a default. Also be carefull when you copy your route to the clipboard not to include any Airport, Runway, Flight Level, Sid, Star, Transition or anything else other than Waypoints and Airways (DCT and DIRECT is acceptable), it also has to be in CAPITAL letters same as the ORIGIN and Destination. -
Hi, dont know if it has been reportes yet, on the Progress Page the Fuel at the "From" Waypoint Fuel is calculated wrong. I had no problem with the ATA or even ETA for the following Waypoints yet, however when i had 4.9 Tons of fuel on board and reached a Waypoint, the waypoint jumps up correctly to the FROM line, ATA writes the correct time of arrival at that certain Waypoint but the Fuel suddently showed 7.1 Tons. Nevertheless the IXEG 733 is so much fun to fly
-
Hi Guys.. I have a working CDU keyboard on the iPad, using the built in UDP code to access datarefs.. Obviously this is great to get data into the sim, but the screen will be blank.. is there a hidden webserver or dataref that can provide what's visible on the CDU screen for external display? Thanks! Mike
-
Hi there . #Jan , can the current FMC do a flyover waypoint , ( I did check the NOT in ver 1.0 post but could not find it ) I tried by entering /O but it did not work Regards Lawrence
-
Hey guys, I just noticed that the FMC always seems to show a trim value of 4.8, no matter what the IXEG "loading" interface says. Is it supposed to be like that or just not an implemented feature? Thank you very much for this great aircraft btw, it really rocks!
-
Hi guys, First of all I want to thanks IXEG team for their excellent job ! Marvellous aircraft ! Since i'm becoming a little bit more familiar with the operation of the aircraft, i started some routine work to make my flights easier and wanted to start setting up some coroutes in the FMC. But i get the error on the fmc : Route not found. File problem. I'm using MAC OS X 10.7.5 and this is how i proceeded. I use the planner on onlineflightplanner.org , and then i enter departure airport and destination airport. Once route calculated, i copied the line into a new .txt file. This is the line i copied into the empty .txt file : EHAM SID ARNEM T196 TEBRO STAR EDDL After that i rename the file EHAMEDDL.txt as EHAMEDDL.fpl and put it into the IXEG 737 Classic/coroutes directory. Since i got that error, i tried to remove SID and STAR in the file (since i reread carefully the Interface Guide.pdf file on page 12 (Coroute flight plans). Then i tried to add 'to' and 'via' words, but with still no luck (even if i follow the example in that pdf file = KSFO MELTS J84 EKR J100 OBJ DCT SNOWY KJFK ). I copied this exact line in my EHAMEDDL.fpl file, but even that didn't work (still same error as above). I hope that someone could clarify the way on how to create coroutes and if there is maybe an easier way (that put the correct airways and waypoints with the requested to/via/dct words in it) and if possible with free programs/websites. Thanks. Olivier
-
Hallo, I am flying Boing 777 professional (I am a beginner and trying to learn). I have programmed the FMC from A to B. Then when I am in the air I must land elsewhere (it´s too foggy or I must do a forced landing). 1. How do I change the arrival airport in the FMC? 2. To make a forced landing perhaps I must descend quickly, then I get an overspeed warning. What is the dangers with that? Or shall I just ignore the warning and proceed?
-
i have some problems when i use more than one holding. sometimes the holding name is outdated at the hold page. a the leg page it looks correct but the holding is ignored or the exit knob is missing. maybe this is related: when i use the "DCT INT" page to enter a direct, i see a new FIX at the current position. this new fix get a label from my route (very confusing). does anybody have the same problems or do you need an example video? crj-200 1.5.3 x-plane 10.11 32bit win7 64bit
-
Hi guys, i have updated my fms-data yesterday (VASFMC_NATIVE_1207.zip), but i don't get any SID/STAR for selection. I have testes serveral airports, but ever the same issue. I have attached the gdb.txt in which show me "/home/markus/X-Plane 10/Aircraft/X-Aviation/CRJ-200//plugins/CRJAvionics/navdata/LevelD_proc/LOWW.xml procedure could not be loaded." many times, but i have no idea how i can fix that. System-Information: Fedora 17 (64Bit) X-Plane 10.05r1 Please contact me if you need further information, thank you very much, best regards Markus gdb.txt ldd.txt Log.txt
