Leen de Jager

Swedish Airforce livery for Take Command! (L.E.S.) Saab 340A by Leen "Flybike" de Jager.
Low and high-res folders included.
Installation:
Simply unzip the contents of Swedish Airforce.zip into a temp folder.
Place the high- or low-res version in the Liveries folder of the aircraft.
Have fun,
Leen de Jager
http://www.flybike-paints.nl

This is a livery made by Leen "Flybike" de Jager for the Piper Pa 11 Super Cub made by Alcalá Simulación for X-Plane 10 (freeware) .
This livery is not exactly depicting an existing livery , the real model just inspired me.
How to install:
Unzip Marina DOr – EC-CXD.zip into a temp folder.
Placing the "liveries" folder into the main directory installs the EC-CXD livery.
This livery however will have the default wooden propellor.
Placing the complete contents of this upload in the main directory of the plane will give you the plane with its black metal propeller.
( backups provided)
This however will make all other liveries having the same propellor too.
No need to say making, a complete copy of your "Piper PA- 11 Cub Special" -install ,naming that copy "Piper PA- 11 Cub Special Black propellor" and
implementing my upload there , will give you the best of both.
Enjoy
Leen de Jager
http://www.flybike-paints.nl

Centurion livery for the Carenado Cessna Centurion by Carenado.
Including panel-normals (customised for this livery and a set for the default -panel)
Read enclosed PDF and follow instructions carefully.
Leen "Flybike" de Jager
http://www.flybike-paints.nl

Buffalo C-GPNR ("Buffalo-Joe" McBryan`s favorit plane) for the LES DC3/C47
Probably the most famous flying C47 these days, we even can say she is a movie-star.
Making a repaint wich already exists is always tricky , people start to compare and gues which one is the best.
Be assured I do not like to see it as a competition.
Even more tricky is making a repaint based on a default livery wich comes with the aircraft ,
Normally I do not make paints on request , let alone ,one based on an existing defeault livery..
For this "movie-star" I am happy to make an exception.
Taking the default LES DC3 in its default Buffalo livery to start with was quiet logic.
In the end not much of this original livery has left the way it was , shapes were changed , text reshaped and logos reversed.
Neverteless there are some lines and shapes wich I did not enterely by myself.
My main goal was to reproduce a C-GPNR wich comes as close to reality as I am abble to make it.
Big problem is the fact the plane changed its looks so many times ( as all pretty girls do ) , its hard to tell exactly how and what.
Outside made close to reality.
Cockpit colors giving a C-GPNR experience.
Cabin ,giving a Buffalo-Air feeling.
I hope you`ll enjoy this flying legend.
Leen de Jager
http://www.flybike-paints.nl

Ejercito del Aire Grupo 42 nr 5 ( Spanish Air-force Training-school ) ,
livery made by Leen "Flybike" de Jager
You need to have the Carenado Beechcraft F33a Bonanza installed to use this textures-set.
These textures are compatible wil all versions XP9 >>>>
Istallation:
Just unzip " Ejercito del Aire Grupo 42 nr 5.zip " into the liveries folder.
Enjoy.
Leen de Jager
http://www.flybike-paints.nl

Normals for Mitsubishi MU-2b-60 (64 bit version) by Leen de Jager
Recently a new version/update of the Mitsubishi MU-2B-60 has been released by X-Aviation.
This version is for XP10 64 bit only.
Due to various changes, the normals-set I previously published cannot be used for this version.
Herewith I present you a new normals-set for the MU-2b-60.
How to install:
Download MU-2B-60_normals.zip and unzip it to a temp folder.
Read the enclosed PDF carefully.
Enjoy
Leen de jager
http://www.flybike-paints.nl

Repaint and visual upgrade for the Morane Saulnier MS 893A Rallye .
This fine freeware ( XP10 version) ) model is available at the XPFR website.
How to implement this French Marine livery:
First make sure you have downloaded and installed the original plane.
If you did you have a folder named MS893A_Rallye_v10 in the General Aviation folder.
Unzip this skin-download Rallye Marine.zip into a temp folder.
Now you`ll find a folder named MS893A_Rallye_v10 (likewise the one you already have)
Just place the folder MS893A_Rallye_v10 into the General Aviation folder overwriting the existing folder/files.
Thats all , you`re ready now.
What happened:
A:
A liveries folder has been created with the Rallye Marine livery in it.
If you already had a liveries folder the Rallye Marine has just been added.
B:
Normalmapping has been added to the default model and other liveries .
Enjoy
Leen "Flybike" de Jager
http://www.flybike-paints.nl

This is a livery-paint for the Piper Tomahawk ( model for X-Plane made by AWALL86.) X-Plane 9 >>
Download the original model by AWALL86 here :http://forums.x-plane.org/index.php? app=downloads&showfile=11697
I deeply fell in love with this lovely bird ,
Painting it has its limitations , nevertheless this was really a challenge , doing some almost impossible paint-things.
This skin depicts the original within the limitations of this model as far as I was able to do.
This set includes normalfiles with speculars for plane , interior and pilot.
It also includes a customised walnut-panel ( for the 3D cockpit-panel only).
Doing research for this project , I met Charlotte Forrestier , the lovely Swiss lady-pilot.
How tow make a nice looking woman from an ugly male pilot ?
Never ever expected to do that kind of job
Well ..... please meet Charlotte !!!
If you do not already have this model, begin downloading and installing it.
Building-in this livery:
Unzip this upload to a temp. folder.
Copy the folder named Piper Tomahawk Breitling from this download into the LIVERIES-folder of
the airplane..
Copy the files named obj3.obj and obj3_NML.png into the main OBJECTS-folder.
Placing these two files here will have NO influence on the existing liveries.
They will only enhance the beauty of Charlotte Forrestier , our female pilot for the Breitling
Tomahawk.
Have fun
Leen "Flybike" de Jager
http://www.flybike-paints.nl

This is a high resolution (4096 = X-Plane 10 only) livery for the default Cessna 172.
(*!) ATTENTION !!
To benefit the effect of the normal-files its vital to download and install my SAR livery for this bird FIRST ( following the instructions carefully)
Then, just place this Skyhawk C-GCAG folder the liveries folder.
Have fun
Leen "Flybike"de Jager
http://www.flybike-paints.nl

Till now , the cockpit and cabinwindows seen from outside always have been invisible.
Just holes to look though , without any "glass" to be seen.
In the latest version X-Plane 10.20 (build 102014)adding some realness to the glass failed again.
I did not want to wait any longer.
Just place the contents of the objects folder from this downlaod in the main objects folder of the King Air.
A backup for the default files is included.
I am confident you`ll never want to use these back-up files.
Enjoy
Leen "Flybike" de Jager

Polish Border Guard livery for PZL M20 "Mewa" ( Piper Seneca manufactured in Poland by WSK PZL Mielec in a limited series from the 1980s. )
A repaint for the Seneca II model by Carenado. ( XP9 and XP10 )
This is a repaint representing a "Mewa" in a Polish Border Guard livery , as far as possible within the restrictions of the texturemapping wich comes with this Carenado plane , wich isn`t that painter friendly.
Nevertheless a gorgeous plane to fly and paint.
Unzip PZL M20 Mewa.zip into a temp. folder and read PZL M20 Mewa readme.pdf
Enjoy
Leen de Jager
http://www.flybike-paints.nl

Simoun Caudron C-635 French Marine livery
by Leen "Flybike" de Jager for the Simoun Coudron C-635 available on XPFR.(Coudron is with an "o" there)
This livery is not exact depicting a (former) existing livery , due to a lack of photomaterial showing one.
Nevertheless I tried to come close to something "looking genuine".
How to install:
Unzip French Marine into a temp folder and read the Caudron Simoun French Marine .pdf
Enjoy
Leen "Flybike"de Jager
http://www.flybike-paints.nl

This is a normal_set for the excellent Cessna Corvalis TT-model (aka the Columbia 400).
Model made by JGX-Designs , available at X-Aviation.
Can be used in XP 9 and 10 !!
Some days ago I got the Corvalis as kinda birthday-present ( be assured ,it was strictly legal ) and I was very pleased having this bird in my X-Plane collection , I really love it.
Its very unlikely I`ll find my way in the extremely sophisticated instruments/panel of this plane.
Its not to blame the plane , nor its great manual.
Its just me , I am just a painter, I am not a pilot.
Being a painter , I was quiet disapponted to see this plane having about fourty excellent default-liveries.
Adding another nice one would be , bringing water to the oceans.
Nevertheless I could not withstand the temptation of adding something I was missing.
Some more gloss and adding normalmapping to the model enhanches its appearance in a great way.
Thats all I did.
How to install:
Just place the files from this upload in the Corvalis main Objects folder.
Please make a backup from the C400_2.obj file in the main Objects folder first.
Thanks to JGX-Desings for giving me permission to publish the edited OBJ file.
Please enjoy.
Leen "Flybike" de Jager
http://www.flybike-paints.nl

OH-CAM Palolento SAR
This is a livery-paint + * for the default Cessna 172 in X-Plane 9 and X-Plane 10
Paint made by Leen "Flybike" de Jager.
* Paintwork for this livery includes added normalmapping and higher-res textures.
Livery dedicated panel and cockpit colors.
By adding normals and increasing the texture-resolution this default Cessna 172 is "as good as new".
This paint depicts (more or less,within the limitations of the model and its painter) OH-CAM
Installation:
Attention this is not just a livery , and cannot be implemented as such.
Uzip this download to a temp. folder and read the enclosed readme PDF carefully!!!.
Enjoy
Leen "Flybike" de Jager
http://www.flybike-paints.nl

Stinson L5 PH-SEN by Leen "Flybike" de Jager
This is a skinset for the default Stinson Sentinel in X-Plane.
MIND!!
This is not a livery to be build in the usual way.
I added normal files to the plane and added and changed some other things too.
Unzip Stinson L5 PH-SEN upload.zip to your desktop and make sure to read the enclosed ReadmeFIRST.PDF
If not installed exactly as described normal mapping will not work.
I hope you`ll enjoy the bird as much as I enjoyed making this special livery.
Adding normals and speculars , its just like magic.
Leen de Jager
http://www.flybike-paints.nl
High resolution and normalmapping the two "magic words"
First picture showing the default livery and PH-SEN livery side by side

http://cdn-www.airliners.net/aviation-photos/photos/9/3/7/1980739.jpg

118527 Jiminy Cricket
This is a livery-paint for the Leading Edge Simulations Douglas DC3/C47.
Paint made by Leen "Flybike" de Jager
This paint depicts (more or less,within the limitations of the model and its painter) the C47-D ,118527 "Jiminy Cricket "
Historical Note:
"Jiminy Cricket" is depicted as it flew for the Sicily operation in improvised night camouflage.
It was one of the original 52 C-47s that deployed to Egypt with the 316thTCG in December 1942.
"Jiminy Cricket" was one of the first from the 316th Sq. ATC, to visit Project 19, delivering worn out parts and returning rebuilt
engines to the RAF.
It eventually took part in the invasion of Sicily, where, the pilot, Sgt. George Quisenberry received wounds from German FLAK.
The shell destroyed the nose of the Aircraft, knocking out all instruments except the stand by compass.
Jiminy carried the crew back with nothing but the moon and the sticking standby compass.
Jiminy Cricket was repaired and served through May 1, 1947, then was "salvaged"
The skin-set includes cockpit- and (freighter-) cabin textures as well.
Passenger-seats, luggage-racks ,airco etc.removed from the plane.( its a freighter now !!)
Livery dedicated panel and cockpit colors
How to install:
Just unzip118527JiminyCricket.zip into a temp. folder , and start reading the readme file.
Have fun and enjoy,
Leen "Flybike" de Jager
http://www.flybike-paints.nl

Shabby-old-panel for the LES DC3 / C47
by Leen "Flybike" de Jager
Last weeks I got requests for making an old, a bit worn out, cockpit ( panel,yokes and consoles) for the Leading Edge Simulations DC3/C47.
Suitable for those who really want to fly the plane on one of its last trips or experiece some real risky smuggling-adventures in an airplane wich is.................................you know.
Or better said flying an old bird.................to its restoration.
This panel comes with dark-grey upholstery and floor.
If you want to use the old panel in a livery having another colored upholstery and floor just remove the file named InnerWall.png from this download ( leave InnerWall_NML.png were it is.)
How to implement?
Just unzip the contents of this zip file into the objects-folder of the livery you want to get the old panel..
Make a backup/copy from this livery first , you might not dare to fly my panel.....it does not look so trustworthy.
Have fun and enjoy
Leen "Flybike" de Jager
http://www.flybike-paints.nl

This is a livery-paint for the Leading Edge Simulations Douglas DC3/C47.
Paint made by Leen "Flybike" de Jager
This paint depicts (more or less,within the limitations of the model and its painter) the DC3 F-AZTE ,flown by
Air France/KLM.
This plane flew under the french registration F-AZTE ( very small, under the H-stab ) .
On the right side of the plane there is a retro Air France livery with the registration F-BBBE while on the left side of the plane we see a retro KLM livery registrated PH-PBA.
This plane really existed in this livery and was used for for promotional purposes
The skin-set includes cockpit and cabin textures as well.
Livery dedicated panel and cockpit colors.
Cabin seats and color more or less depicting the original one.
Passenger-cabin-ceiling without airco-units , just like the original old Dakota-ceiling.
Night-time navigation trough the dome enabled. ( you`ll have to use your own sextant )
How to install:
Just unzip F-AZTE.zip into a temp. folder , and start reading the readme file.
Enjoy
Leen "Flybike" de Jager
http://www.flybike-paints.nl

This is a livery-paint for the Leading Edge Simulations Douglas DC3 .
Paint made by Leen "Flybike" de Jager
This paint depicts (more or less,within the limitations of the model) the DC3 CS-TDA
flown by Transportes Aéreos Portugueses. (1945-1958 )
A guy from Portugal asked for this livery , he`ll receive my invoice shortly.
The original model had wing-registration , due to the limitations of the texture-mapping of this model , this could not be reproduced. ( grrrrrrrrr..........!!)
The skin-set includes cockpit and cabin textures as well.
How to install:
Just unzip TAP CS-TDA.zip into a temp. folder , and start reading the readme file.
Enjoy,
Leen "Flybike" de Jager
http://www.flybike-paints.nl

This is a livery-paint for the Leading Edge Simulations Douglas DC3/C47.
Paint made by Leen "Flybike" de Jager
Photo-research and "mental coaching" by Harvey Stein
Thanks Harvey ,for encouraging me to lay my hands on this fabulous Douglas Sleeper Traveller !!!!
This paint depicts (more or less,within the limitations of the model) the DST , Douglas Sleeper Traveller , wich was in fact an enlarged version of the DC2 , made by Douglas on request by American Airlines. ( round 1935 )
After a production of about seven DST`s the plane was rebaptised and became the name Douglas Commercial nr 3 , the DC3 was born and a new era in aviation started.
So we can say, this is a kinda "Mama-Dakota"
The original model had wing-registration , due to the limitations of the texture-mapping of this model , this could not be reproduced. ( grrrrrrrrr..........!!)
The skin-set includes cockpit and cabin textures as well.
New features : Main wingfairing more visible ( texture and normals) , new right-side passengers-door AND sleper-windows.
How to install:
Just unzip DST-NC28325.zip into a temp. folder , and start reading the readme file.
Enjoy
Leen "Flybike" de Jager
http://www.flybike-paints.nl

This is a livery-paint for the Leading Edge Simulations Douglas DC3/C47.
Paint made by Leen "Flybike" de Jager
This paint depicts (more or less) the DC3/C47, FZ658, Royal Newfoundland Air Force.
Mind the strange "roundel" on the fuselage, this was a political protest on an air-force plane, and caused some fuzz in 1948/9
The original model had wing-registration, due to the limitations of the texture-mapping of this model, this could not be reproduced. ( grrrrrrrrr..........!!)
The skin-set includes cockpit and cabin textures as well.
Pay attention to the difference between the day and night-cabin-textures.
How to install:
Just unzip FZ658_Newfoundland.zip into a temp. folder, and start reading the readme file
This livery comes without pilots.
If you prefer to have the little guys at the yokes, just remove the pilot.png file from the FZ658_Newfoundland/objects - folder
Have fun -
Leen "Flybike" de Jager
http://www.flybike-paints.nl

This is a livery-paint for the Leading Edge Simulations Douglas DC3/C47.
by Leen "Flybike" de Jager
This paint depicts (more or less) the DC3/C47, Iberia EC-ADR .
The original model had wing-registration, due to the limitations of the texture-mapping of this model, this could not be reproduced. ( grrrrrrrrr..........!!)
Outside-looks based on sparse photo-material, cockpit inside, just one of the many variants (artists impression if you like) and not representing the original one. This might have been the cockpit when this aicraft had been restored by ................ instead of ending on a scrap-yard.
She is not anymore, the memory however is immortal.
Another tribute to the bird I fell in love with.
How to install:
Just unzip Iberia.zip to a temp. folder and start reading the Iberia Readme First PDF carefully.
Enjoy,
Leen de Jager
http://www.flybike-paints.nl

This is a livery-paint for the Leading Edge Simulations Douglas DC3/C47, painted by Leen "Flybike" de Jager
This paint depicts (more or less) the DC3, N102AP in the Virgin Islands International Airways livery.
The original model had wing-registration, due to the limitations of the texture-mapping of this model, this could not be reproduced. ( grrrrrrrrr..........!!)
This time I removed the (tiny) pilots from the cockpit.*
How to install:
Just unzip N102AP.zip in a temp folder, and start reading the Virgin Islands Readme First.PDF carefully.
*IF you want the pilots back in the cockpit simply remove file Pilot.png from the N102AP Virgin Islands/objects-folder.
Yes, removing a file to get something back, it sounds weird, but I am not kidding.
Enjoy
Leen de Jager
http://www.flybike-paints.nl

Previously published LES DC3/C47 liveries by Leen de Jager :
Flottilje 56S French Navy
Airborne-Imaging
Royal Australian Air Force
Fuerza Aerea Argentina
Quetzalcoatl = double-scheme livery <->
Classic Air/Alrodo = double-scheme livery <->
G-AMSV Air Atlantique anniversary 50th year Dakota
Braniff N25672

Livery by Leen “Flybike” de Jager, filename Stampe-F-GKEB.zip for the:
Stampe SV4C with Renault 4P engine
Version 2.0
Released by Lamahelo & Beber
for “XPFR.aeronautics” and available on the XPFR website.
Look for STAMPE-SV4C_v.09-270_(33).zip ( designed for XP9 flying like a charm in XP10)
Sometimes a model is so appealing I really wonder why do`nt we all fly this bird?
I installed the little bird in X-Plane10 and I am thrilled.
Really a small jewel , looking so pretty and flying so pleasantly.
As usual I could not resist making an extra attractive skin.
I implemented normal files in the model, added several details as usual, etc.
A big "Merci beaucoup" for my friends from XPFR.
This really is a "MUST HAVE"
Enjoy
Leen de Jager
http://www.flybike-paints.nl

Colani-cargo livery by Leen "Flybike" de Jager, for the MU-2, model by X-Scenery
It depicts the Colani cargo-livery for this Mitsubishi MU2 twin-turbo-prop.
Due to the limitations of the model you`ll experience the "cargo-feeling" just on the outside.
I added normal-files (with specular-layers) wich contain custom-made effects (specular regulated gloss).
and special made LIT and NML- files, reveiling where the tail-logo-light comes from.
Please read the enclosed "Colani README FIRST.PDF" carefully.
MIND:
This MU2 model was designed for XP9 and not yet 100% performing in XP10.
The model however can be flown in XP10 and this livery is compatible.
Screenshots shown were made in XP10.
Questions, or need help, please mail me.
Enjoy,
Leen de Jager
http://www.flybike-paints.nl