PapaMosh

Thank you for sharing that. Helps me a lot. Did you have an idea how to create a PilotViewLimits.dat. This would be fine to limit the head x/y/z movements to keep the head into the cabine .

Thank you for your passion to give such a detailed explanation. With this knowledge it is just more fun to fly the baby. Thank you! Greetings PapaMosh

Hey, great support here. Many thanks. Yes I've tried the click and drag on the transponder in longitudial direction. But for the transponder it has to be moved in the lateral direction. And for the ADF I didnt tried it this way. Great now it works for me. The animation issue on the prop leverage conditioner is not important for me. One more question concerning the differences between the two versions. In Javier's version at full throttle I get something above 1400 ft-lb torque. In Lukasz version I'm not able to maintain more than 700 ft-lb torque. What is the reason for this? This means I'm not able to maintain up to 1015 ft lb torque as in the Flight Manual T-34C suggested. The Lukasz version feels great in approach and landing because it reacts smooth on inputs, but it seems to lack performance for acrobatic flying. Or did I miss again something ;-)

Hi Javier, thanks a lot for the quick answer. I've tried your original act and there the prop leverage conditioner works fine. But the ADF Power know issue is also present in this act. I've noticed the transponder is not operable means it is sticked to off. Greetings PapaMosh

Hi, first let me say I love this plane. I'm relatively new to X-Plane after making a pause for years in aviation simulations. That means it is possible the reason for one or other problem is in some setting issues. But I hope I can find any suggestions here. I'm using X-Plane in the latest stable version, PilotView, REXHD and of course the Mentor 1.1 on Windows 7 64bit. No other tools. I'm using the improved version by Lukasz. 1. Pilot disappeared After installation and looking around the bird I saw the pilot sitting in front as expected. After some setting corrections with TrackIR and joystick axis, the pilot disappears. Quitting and reloading the app changes nothing. My pilot disappears forever :-) 2. Prop leverage I've assigned one of my axis to the propeller leverage. This works perfectly but visually in the 3D Cockpit the leverage is only operating in the full increased zone some centimeters, not the full range. But in the simulation it seems to operate in the full range. That means if I reduce the propeller completely the Prop Tacho shows it. 3. ADF Power settings The ADF power switch does nothing. If I press the ADP test knob, the ADF is switched off and I'm not able to switch it on. Please keep up this great working and btw I'm sure my next bird - after I'm more comfortable with X-Plane and IFR procedures - will be the CRJ200. Many greetings from germany PapaMosh